iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60645-1:2015

(Main)

Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone audiometry

Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone audiometry

IEC 60645-1:2012 specifies general requirements for audiometers and particular requirements for pure-tone audiometers designed for use in determining hearing threshold levels, relative to standard reference threshold levels established by means of psychoacoustic test methods. The object of this standard is to ensure: a) That tests of hearing in the frequency range 125 Hz to 16 000 Hz on a given human ear, performed with different audiometers which comply with this standard shall give substantially the same results; b) That the results obtained represent a valid comparison between the hearing of the ear tested and the reference threshold of hearing; c) That audiometers are classified according to the range of test signals they generate, according to the mode of operation or according to the complexity of the range of auditory functions they test. This third edition cancels and replaces the second edition, published in 2001, and IEC 60645-4 published in 1994. It constitutes an editorial revision.

Akustik - Audiometer - Teil 1: Reinton-Audiometer

Électroacoustique - Appareils audiométriques - Partie 1: Appareils pour l’audiométrie tonale

La CEI 60645-1:2012 spécifie des exigences générales applicables aux audiomètres et des exigences particulières applicables aux audiomètres tonaux conçus pour la détermination des seuils d'audition, par rapport aux seuils d'audition établis au moyen de méthodes d'essai psychoacoustiques. L'objet de la présente norme est de s'assurer: a) Que les essais d'audition effectués sur une oreille humaine donnée, dans le domaine des fréquences comprises entre 125 Hz et 16 000 Hz, avec différents audiomètres satisfaisant à la présente Norme, donnent obligatoirement sensiblement les mêmes résultats; b) Que les résultats obtenus représentent une comparaison correcte entre l'audition de l'oreille mesurée et le seuil d'audition de référence; c) Que les audiomètres sont classés conformément au domaine des signaux d'essai qu'ils produisent, à leur mode de fonctionnement ou à la complexité du domaine des fonctions auditives qu'ils peuvent examiner. Cette troisième édition annule et remplace la deuxième édition parue en 2001, et la CEI 60645-4 parue en 1994. Elle constitue une révision éditoriale.

Elektroakustika - 1. del: Oprema za avdiometrijo čistega tona

Ta del standarda IEC 60645 določa splošne zahteve za avdiometre in posebne zahteve za avdiometre čistega tona, zasnovane za določanje ravni pragov slišnosti relativno na standardne referenčne pragove slišnosti, določene s psihoakustičnimi preskusnimi metodami.
Cilj tega standarda je zagotoviti
a) da se s preskusi sluha v frekvenčnem razponu od 125 Hz do 16 000 Hz na danem človeškem ušesu, izvedenimi z različnimi avdiometri, ki so skladni s tem standardom, pridobi načeloma enake rezultate;
b) da pridobljeni rezultati predstavljajo veljavno primerjavo med sluhom testiranega ušesa in referenčnimi pragovi slišnosti;
c) da so avdiometri razvrščeni na podlagi razpona preskusnih signalov, ki jih proizvajajo, glede na način delovanja ali glede na kompleksnost razpona slušnih funkcij, ki jih testirajo.

General Information

Status
Withdrawn
Publication Date
22-Jan-2015
Withdrawal Date
04-Nov-2017
ICS
17.140.50 - Electroacoustics
Technical Committee
CLC/SR 29 - Electroacoustics
Drafting Committee
IEC/TC 29 - IEC_TC_29
Parallel Committee
IEC/TC 29 - IEC_TC_29
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
06-Oct-2020
Completion Date
06-Oct-2020
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Mandate
M/432 - Standardisation Mandate addressed to CEN and CENELEC within the framework of Directive 2007/47/EC amending Directive 90/385/EEC and Directive 93/42/EEC relating to Medical Devices
Ref Project
SIST EN 60645-1:2015 - Electroacoustics - Part 1: Equipment for pure-tone audiometry

Relations

Replaces
EN 60645-4:1995 - Audiometers - Part 4: Equipment for extended high-frequency audiometry
Effective Date
28-Jan-2023
Replaces
EN 60645-1:2001 - Electroacoustics - Audiological equipment - Part 1: Pure-tone audiometers
Effective Date
28-Jan-2023
Replaced By
EN 60645-1:2017 - Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry
Effective Date
10-Oct-2017

Buy Standard

EN 60645-1:2015EN 60645-1:2015
PreviousNext
Standard
EN 60645-1:2015
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2015
1DGRPHãþD
SIST EN 60645-4:1999
(OHNWURDNXVWLNDGHO2SUHPD]DDYGLRPHWULMRþLVWHJDWRQD
Electroacoustics - Part 1: Equipment for pure-tone audiometry
Akustik - Audiometer - Teil 1: Reinton-Audiometer
Electroacoustique - Appareils audiométriques - Partie 1: Appareils pour l'audiométrie
tonale
Ta slovenski standard je istoveten z: EN 60645-1:2015
ICS:
17.140.50 Elektroakustika Electroacoustics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60645-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2015
ICS 17.140.50 Supersedes EN 60645-1:2001, EN 60645-4:1995
English Version
Electroacoustics - Audiometric equipment -
Part 1: Equipment for pure-tone audiometry
(IEC 60645-1:2012)
Électroacoustique - Appareils audiométriques -  Akustik - Audiometer -
Partie 1: Appareils pour l'audiométrie tonale Teil 1: Reinton-Audiometer
(IEC 60645-1:2012) (IEC 60645-1:2012)
This European Standard was approved by CENELEC on 2014-11-05. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60645-1:2015 E
Foreword
The text of document 29/754/FDIS, future edition 3 of IEC 60645-1, prepared by
IEC/TC 29 "Electroacoustics" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60645-1:2015.
The following dates are fixed:
(dop) 2015-08-05
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-11-05
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60645-1:2001 and EN 60645-4:1995.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).

Endorsement notice
The text of the International Standard IEC 60645-1:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61260 NOTE Harmonized as EN 61260.
ISO 389-9 NOTE Harmonized as EN ISO 389-9.

- 3 - EN 60645-1:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

IEC 60268-3 -  Sound system equipment - EN 60268-3 -
Part 3: Amplifiers
IEC 60318-1 -  Electroacoustics - Simulators of human EN 60318-1 -
head and ear -
Part 1: Ear simulator for the measurement
of supra-aural and circumaural earphones
IEC 60318-3 -  Electroacoustics - Simulators of human EN 60318-3 -
head and ear -
Part 3: Acoustic coupler for the calibration
of supra-aural earphones used in
audiometry
IEC 60318-4 -  Electroacoustics - Simulators of human EN 60318-4 -
head and ear -
Part 4: Occluded-ear simulator for the
measurement of earphones coupled to the
ear by means of ear inserts
IEC 60318-5 -  Electroacoustics - Simulators of human EN 60318-5 -
head and ear -
Part 5: 2 cm³ coupler for the measurement
of hearing aids and earphones coupled to
the ear by means of ear inserts
IEC 60318-6 -  Electroacoustics - Simulators of human EN 60318-6 -
head and ear -
Part 6: Mechanical coupler for the
measurements on bone vibrators
IEC 60601-1 -  Medical electrical equipment - EN 60601-1 -
Part 1: General requirements for basic
safety and essential performance
IEC 60601-1-2 -  Medical electrical equipment - EN 60601-1-2 -
Part 1-2: General requirements for basic
safety and essential performance -
Collateral standard: Electromagnetic
disturbances - Requirements and tests
IEC 60645-2 -  Audiometers - EN 60645-2 -
Part 2: Equipment for speech audiometry
IEC 61672-1 -  Electroacoustics - Sound level meters - EN 61672-1 -
Part 1: Specifications
Publication Year Title EN/HD Year

ISO 266 -  Acoustics - Preferred frequencies EN ISO 266 -
ISO 389-1 -  Acoustics - Reference zero for the EN ISO 389-1 -
calibration of audiometric equipment -
Part 1: Reference equivalent threshold
sound pressure levels for pure tones and
supra-aural earphones
ISO 389-2 -  Acoustics - Reference zero for the EN ISO 389-2 -
calibration of audiometric equipment -
Part 2: Reference equivalent threshold
sound pressure levels for pure tones and
insert earphones
ISO 389-3 -  Acoustics - Reference zero for the EN ISO 389-3 -
calibration of audiometric equipment -
Part 3: Reference equivalent threshold
force levels for pure tones and bone
vibrators
ISO 389-4 1994 Acoustics - Reference zero for the EN ISO 389-4 1998
calibration of audiometric equipment -
Part 4: Reference levels for narrow-band
masking noise
ISO 389-5 -  Acoustics - Reference zero for the EN ISO 389-5 -
calibration of audiometric equipment -
Part 5: Reference equivalent threshold
sound pressure levels for pure tones
in the frequency range 8 kHz to 16 kHz
ISO 389-7 -  Acoustics - Reference zero for the EN ISO 389-7 -
calibration of audiometric equipment -
Part 7: Reference threshold of hearing
under free-field and diffuse-field listening
conditions
ISO 389-8 -  Acoustics - Reference zero for the EN ISO 389-8 -
calibration of audiometric equipment -
Part 8: Reference equivalent threshold
sound pressure levels for pure tones and
circumaural earphones
ISO 4869-1 -  Acoustics - Hearing protectors - EN 24869-1 -
Part 1: Subjective method for the
measurement of sound attenuation
ISO 8253-1 2010 Acoustics - Audiometric test methods - EN ISO 8253-1 2010
Part 1: Pure-tone air and bone conduction
audiometry
ISO 8253-2 -  Acoustics - Audiometric test methods - EN ISO 8253-2 -
Part 2: Sound field audiometry with pure-
tone and narrow-band test signals
ISO 8253-3 -  Acoustics - Audiometric test methods - EN ISO 8253-3 -
Part 3: Speech audiometry
IEC 60645-1 ®
Edition 3.0 2012-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electroacoustics – Audiometric equipment –

Part 1: Equipment for pure-tone audiometry

Électroacoustique – Appareils audiométriques –

Partie 1: Appareils pour l’audiométrie tonale

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX V
ICS 17.140.50 ISBN 978-2-88912-915-7

– 2 – 60645-1 © IEC:2012
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 Requirements for specific types of fixed frequency audiometer . 12
5 General requirements . 13
5.1 General safety requirements . 13
5.2 Acoustic safety requirements . 13
5.3 Environmental conditions . 13
5.4 Warm-up time . 13
5.5 Power supply variation . 13
5.5.1 Interruption of power supply . 13
5.5.2 Mains operation . 14
5.5.3 Battery operation . 14
5.5.4 Other power supplies . 14
5.6 Electromagnetic compatibility . 14
5.7 Unwanted sound . 14
5.7.1 General . 14
5.7.2 Unwanted sound from an earphone . 14
5.7.3 Unwanted sound from a bone vibrator . 14
5.7.4 Unwanted sound radiated by an audiometer . 15
5.8 Testing of automatic-recording audiometers . 15
5.9 Interface connections . 15
6 Test signals . 15
6.1 Pure tones . 15
6.1.1 Frequency range and hearing level range . 15
6.1.2 Frequency accuracy . 16
6.1.3 Total harmonic distortion . 16
6.1.4 Rate of frequency change . 17
6.2 Frequency modulation . 17
6.3 External signal source . 17
6.3.1 Signals . 17
6.3.2 Frequency response . 17
6.3.3 Electrical sensitivity . 18
6.3.4 Reference level for external signal source . 18
6.3.5 Operator to subject speech communication . 18
6.3.6 Subject to operator speech communication . 18
6.4 Masking sound . 18
6.4.1 General . 18
6.4.2 Narrow-band noise . 18
6.4.3 Other masking sound . 20
7 Transducers . 20
7.1 Type of transducers .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60118-0:2024(Main)
Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids
SIST EN IEC 60118-0:2024

IEC 60118-0:2022 gives recommendations for the measurement of the performance characteristics of air conduction hearing aids measured with an acoustic coupler or occluded ear simulator. This document is applicable to the measurement and evaluation of the electroacoustical characteristics of hearing aids, for example for type testing and manufacturer data sheets. This document is also applicable for the measurement of the performance characteristics of hearing aids for production, supply and delivery quality-assurance purposes. The measurement results obtained by the methods specified in this document will express the performance under conditions of the measurement and can deviate substantially from the performance of the hearing aid under actual conditions of use. This document primarily uses an acoustic coupler according to IEC 60318-5 which is only intended for loading a hearing aid with specified acoustic impedance and is not intended to reproduce the sound pressure in a person's ear. For measurements reflecting the output level in the normal human ear the occluded ear simulator according to IEC 60318-4 can be used. For extended high-frequency measurements and for deep insert hearing aids, the acoustic coupler according to IEC 60318-8 can be used. This document also covers measurement of hearing aids with non-acoustic inputs, such as wireless, inductive or electrical input. This document does not cover the measurement of hearing aids for simulated in situ working conditions, for which IEC 60118-8 can be applied. This document does not cover the measurement of hearing aids under typical user settings and using a speech-like signal, for which IEC 60118-15 can be applied. IEC 60118-0:2022 merges and updates the methods previously described in IEC 60118-0:2015 and IEC 60118-7:2005. It cancels and replaces the third edition of IEC 60118-0 published in 2015. This edition constitutes a technical revision. Measurements for quality control as described in IEC 60118-7:2005 can be found in Clause 10 of this document. This edition includes the following significant technical changes with respect to previous editions: a) the default use of an acoustic coupler according to IEC 60318-5, b) addition of the optional use of an occluded ear simulator according to IEC 60318-4, c) addition of the optional use of an acoustic coupler according to IEC 60318-8 (new standard based on IEC TS 62886) when information about the response above 8 kHz is needed, or the optional use of the acoustic coupler according to IEC 60318-8 for deep insert hearing aids, d) the addition of measurements of the performance of hearing aids for production, supply and delivery quality assurance purposes, e) corrected and updated measurement configuration and methods, adding the use of a sequential measurement as preferred configuration, f) updated and expanded measurement procedures for the non-acoustic inputs of the hearing aid.

  • Standard
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60318-7:2022(Main)
Electroacoustics - Simulators of human head and ear - Part 7: Head and torso simulator for the measurement of sound sources close to the ear
SIST EN IEC 60318-7:2023

This part of IEC 60318 describes a head and torso simulator, or manikin, intended for the measurement of sound sources placed close to the ear in the frequency range from 100 Hz to 16 000 Hz. The manikin described in this part of IEC 60318 is intended for airborne acoustic measurements only. It is not suitable for measurements which depend upon vibration transmission paths such as bone conduction, or for measurements requiring the simulation of bone or tissue. This document specifies the manikin in terms of both its geometrical dimensions and its acoustical properties. For conformance with this document, a manikin shall be compliant with both sets of specifications.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60318-8:2022(Main)
Electroacoustics - Simulators of human head and ear - Part 8: Acoustic coupler for high-frequency measurements of hearing aids and earphones coupled to the ear by means of ear inserts
SIST EN IEC 60318-8:2022

IEC 60318-8:2022 describes an acoustic coupler for loading a hearing aid or insert earphone with a specified acoustic impedance when testing its acoustic performance, in the frequency range up to 16 kHz. It is suitable for air-conduction hearing aids and earphones, coupled to the ear by means of ear inserts, earmoulds or similar devices. The acoustic coupler does not simulate the human ear. However, it has an effective volume of only 0,4 cm3, which is small enough not to produce significant resonances in the coupler in the frequency range below 16 kHz. Therefore, it will load the earphone with a known acoustic impedance, which allows repeatable measurements with low uncertainty to be obtained on earphones used in extended high-frequency audiometry.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60645-6:2022(Main)
Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions
SIST EN IEC 60645-6:2022

IEC 60645-6:2022 is available as IEC 60645-6:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 606045-6:2022 applies to instruments designed primarily for the measurement of otoacoustic emissions in the human external auditory meatus evoked by acoustic probe stimuli. This document defines the characteristics to be specified by the manufacturer, specifies minimum mandatory functions for two types of instruments and provides performance specifications applicable to both instrument types. This document describes methods to be used to demonstrate conformance with the specifications in this document and guidance on methods for periodic calibration. The purpose of this document is to ensure that measurements made under comparable test conditions with different instruments complying with this document will be consistent. Instruments can provide a measurement function not specifically within the scope of this document and still comply with the relevant requirements of this document for the functions that are within the scope. This document is not intended to restrict development or incorporation of new features, nor to discourage innovative approaches. IEC 606045-6:2022 cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the nominal test frequency used in DPOAE is now defined as the higher of the two frequencies, f2; b) the permitted deviation of the stimulus signal for TEOAE has been specified; c) the frequency range for DPOAE stimulus signals has been redefined, d) the stimulus level requirements for TEOAE have been redefined; e) the stimulus level requirements for DPOAE have been redefined; f) the harmonic distortion requirements for DPOAE have been redefined; g) a minimum measurement range for DPOAE has been added.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60118-16:2022(Main)
Electroacoustics - Hearing aids - Part 16: Definition and verification of hearing aid features
SIST EN IEC 60118-16:2022

This part of IEC 60118 gives definitions for common hearing aid features such as noise reduction or feedback reduction, etc. Only acoustical inputs are considered. Binaural features are currently not covered in this document. In addition, measurement procedures are described to verify hearing aid features. The objective is not to evaluate the performance of features but to verify their existence and functionality. Furthermore, definitions and procedures are kept as general as possible so that this document can be applied to various types of hearing aids, e.g. air conduction hearing aids or bone conduction hearing aids. To this end, the general definition for hearing aid of IEC 60118-0:2015 is adopted, and this document does not refer to any specific ear simulator or acoustic coupler but uses a general definition of a coupler. However, if a general view is not applicable or leads to unclear or complex wording, the situation for an air conduction hearing aid is considered, only. Nevertheless, in Clause 4, an explanation is given on how this document can be applied to hearing aids which do not use air conduction.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61094-2:2009/A1:2022(Amendment)
Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
SIST EN 61094-2:2009/A1:2022

No scope available

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60645-3:2020(Main)
Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration
SIST EN IEC 60645-3:2021

IEC 60645-3:2020 specifies a means of describing the physical characteristics, in terms of electrical waveforms, of audiometric reference and test signals of short duration and methods for their measurement. The object of this document is to ensure that audiometric stimuli of short duration are specified and measured in the same way and that the calibration of equipment using such signals is carried out using defined methods. This document does not describe the method of use of short-duration test signals. IEC 60645-3:2020 cancels and replaces the second edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) new figures of reference signals; b) changes in definitions.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60263:2020(Main)
Scales and sizes for plotting frequency characteristics and polar diagrams
SIST EN IEC 60263:2020

IEC 60263:2020 specifies standard aspect ratios for logarithmic or level characteristics expressed in decibels versus a logarithmic frequency axis and ranges for the radius of polar diagrams of level. Applications include hard copy printouts, electronic files (e.g., PDF files), scientific publications, screen displays in computer programs and apps, as well as graphs in standards. Informative examples of graphs that conform to the requirements in this document are found in Annex A. Although outside the scope of this document, graphs with a linear y-axis versus logarithmic frequency (e.g., phase, group delay, etc.) often accompany the standard aspect ratio graphs of level described in the normative part of this document. These are described in informative Annex B. IEC 60263:2020 cancels and replaces the third edition published in 1982. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the scope is expanded to include electronic files (e.g., PDF), scientific publications, graphs in other standards, and screen displays in programs and apps; b) a Terms and Definitions clause has been added; c) aspect ratios of 20 dB/decade, and 0,5, 1, 1,25, and 2,5 decades/decade have been added; d) ranges of 60 dB or 30 dB are specified for polar plots of absolute level; a 30 dB range is specified for polar plots of relative level; e) as most graphs are now computer generated, tolerances and sizes have been removed; f) all informative figures have been updated with contemporary examples; g) an informative annex with information about linear y-axis vs. logarithmic frequency has been added.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60601-2-66:2020(Main)
Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing aids and hearing aid systems
SIST EN IEC 60601-2-66:2020

IEC 60601-2-66:2019 is available as IEC 60601-2-66:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60601-2-66:2019 applies to the BASIC SAFETY of HEARING AIDS and HEARING AID SYSTEMS, hereafter also referred to as ME EQUIPMENT or ME SYSTEM. IEC 60601-2-66:2019 cancels and replaces the second edition published in 2015. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) revision of the definition about ESSENTIAL PERFORMANCE; b) revision of the application of IEC 60601-1-2:2014 for electromagnetic disturbances; c) correction of the used voltage for HEARING AIDS from 1,6 V to 4,5 V; d) correction of the drop test level from 1,5 m to 1,0 m; e) correction of the wording of IEC 60601-2-66:2015.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60118-13:2020(Main)
Electroacoustics - Hearing aids - Part 13: Requirements and methods of measurement for electromagnetic immunity to mobile digital wireless devices
SIST EN IEC 60118-13:2020

IEC 60118-13:2019 covers the relevant EMC phenomena for hearing aids. Hearing aid immunity to high frequency fields originating from digital wireless devices such as mobile phones was identified as one of the most relevant EMC phenomena impacting hearing aids. IEC 60118-13:2019 cancels and replaces the fourth edition published in 2016 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) it introduces a new measurement method and set of EMC requirements for hearing aids immunity to mobile digital wireless devices; b) generic EMC requirements for hearing aids are no longer included – should be covered by other standards as appropriate.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day