Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds

This document specifies the test methods and requirements of tests for fingerprinting (as defined in 3.9) of solvent-free polymerizable, reacting resinous compound intended to be used for electrical insulation and/or mechanical protection in cable accessories covered by EN 50393, HD 629.1 and HD 629.2, for low and medium voltage up to 20,8/36 (42) kV. Fingerprinting testing of materials does not have a mandatory link to type testing of accessories. It is regarded as stand-alone tests, but it can be carried out in combination with the accessory type tests. NOTE Information on health and safety is given in Annex A.

Kabel und isolierte Leitungen - Garnituren - Materialcharakterisierung - Teil 1: Fingerprintprüfungen für Reaktionsharzmassen

Dieses Dokument Norm legt die Prüfverfahren und Anforderungen für Fingerprintprüfung (entsprechend 3.9), an lösemittelfreien aushärtbaren Reaktionsharzmassen, die als elektrische Isolierung und/oder mechanischer Schutz für Kabelgarnituren nach EN 50393, HD 629-1 und HD 629-2 fest, die für Nieder- und Mittelspannung bis 20,8/36 (42) kV eingesetzt werden. Fingerprintprüfung an Werkstoffen ist nicht zwingend mit Typprüfungen von Garnituren verbunden. Sie wird als eigenständige Prüfung betrachtet, kann aber auch in Kombination mit Typprüfungen von Garnituren durchgeführt werden. ANMERKUNG Informationen zu Gesundheit und Sicherheit enthält Anhang A.

Câbles électriques - Accessoires - Caractérisation des matériaux - Partie 1: Essais d'identification pour les composés résineux

Le présent document spécifie les méthodes et les exigences d’essai pour les essais d’identification (tels qu’ils sont définis en 3.9) des composés résineux réactifs polymérisables sans solvant destinés à être utilisés pour l’isolation électrique et/ou la protection mécanique dans les accessoires de câbles couverts par l'EN 50393, le HD 629.1 et le HD 629.2, pour la basse et la moyenne tension jusqu’à 20,8/36 (42) kV. Il n’existe pas obligatoirement de lien entre les essais d’identification des matériaux et les essais de type des accessoires. Ils sont considérés comme des essais indépendants, mais ils peuvent être réalisés conjointement avec les essais de type des accessoires. NOTE Des informations concernant la santé et la sécurité sont données à l'Annexe A.

Električni kabli - Pribor - Značilnosti materialov - 1. del: Identifikacija materiala za smolne zmesi

Ta dokument določa preskusne metode in zahteve preskusov za identifikacijo materiala (kot je opredeljeno v točki 3.9) za reagirajoče smolne zmesi, ki jih je mogoče polimerizirati, ne vsebujejo topil ter se predvidoma uporabljajo za električno izolacijo in/ali mehansko zaščito v kabelskih pripomočkih za uporabo v nizko- in srednjenapetostnih sistemih z napetostjo do 20,8/36 (42) kV, kot je opredeljeno v standardih EN 50393, HD 629.1 in HD 629.2.
Preskušanje materialov na podlagi identifikacije se ne povezuje nujno s tipskim preskušanjem pripomočkov. Obravnava se kot sklop samostojnih preskusov, vendar se lahko izvaja v kombinaciji s tipskimi preskusi pripomočkov.
OPOMBA: Podatki o varovanju zdravja in varnosti so podani v dodatku A.

General Information

Status
Published
Publication Date
02-Nov-2023
Current Stage
6060 - Document made available - Publishing
Start Date
03-Nov-2023
Due Date
08-Jan-2025
Completion Date
03-Nov-2023

Relations

Buy Standard

Standard
EN 50655-1:2023
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50655-1:2023
01-december-2023
Električni kabli - Pribor - Značilnosti materialov - 1. del: Identifikacija materiala za
smolne zmesi
Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for
resinous compounds
Kabel und isolierte Leitungen - Garnituren - Materialcharakterisierung - Teil 1:
Fingerprintprüfungen für Reaktionsharzmassen
Câbles électriques - Accessoires - Caractérisation des matériaux - Partie 1: Essais
d'identification pour les composés résineux
Ta slovenski standard je istoveten z: EN 50655-1:2023
ICS:
29.035.20 Plastični in gumeni izolacijski Plastics and rubber insulating
materiali materials
29.060.20 Kabli Cables
SIST EN 50655-1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50655-1:2023

---------------------- Page: 2 ----------------------
SIST EN 50655-1:2023


EUROPEAN STANDARD EN 50655-1

NORME EUROPÉENNE

EUROPÄISCHE NORM November 2023
ICS 29.035.20 Supersedes EN 50655-1:2017
English Version
Electric cables - Accessories - Material characterization - Part 1:
Fingerprinting for resinous compounds
Câbles électriques - Accessoires - Caractérisation des Kabel und isolierte Leitungen - Garnituren -
matériaux - Partie 1: Essais d'identification pour les Materialcharakterisierung - Teil 1: Fingerprintprüfungen für
composés résineux Reaktionsharzmassen
This European Standard was approved by CENELEC on 2023-10-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50655-1:2023 E

---------------------- Page: 3 ----------------------
SIST EN 50655-1:2023
EN 50655-1:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Fingerprinting . 7
4.1 General . 7
4.2 Sampling . 7
4.3 Preparation and conditioning . 8
4.4 Sequence of tests . 8
4.5 Test report . 8
Annex A (informative) Health and safety . 13
Bibliography .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.