EN 50267-2-2:1998
(Main)Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity
EN 50267-2-2 specifies the test method and procedure for the determination of the degree of acidity of gases evolved during the combustion of materials taken from electric or optical cables by measuring pH and conductivity. Note: the relevant cable standard should indicate when materials from the cable should be tested
Allgemeine Prüfverfahren für das Verhalten von Kabeln und isolierten Leitungen im Brandfall - Prüfung der bei der Verbrennung der Werkstoffe von Kabeln und isolierten Leitungen entstehenden Gase - Teil 2-2: Prüfverfahren - Bestimmung des Grades der Azidität von Gasen bei Werkstoffen durch pH-Wert und Leitfähigkeit
Méthodes d'essai communes aux câbles soumis au feu - Essais sur les gaz émis lors de la combustion d'un matériau prélevé sur un câble - Partie 2-2: Procédures - Détermination de l'acidité des gaz des matériaux par une mesure du pH et de la conductivité
Splošne metode za preskušanje kablov v požarnih razmerah - Ugotavljanje nastajanja plinov pri gorenju kabelskih materialov - 2-2. del: Postopki - Ugotavljanje stopnje kislosti plinov za materiale z merjenjem pH in prevodnosti
General Information
- Status
- Withdrawn
- Publication Date
- 16-Jun-1998
- Withdrawal Date
- 29-Feb-2000
- Technical Committee
- CLC/TC 20 - Electric cables
- Drafting Committee
- IEC/TC 20 - IEC_TC_20
- Parallel Committee
- IEC/TC 20 - IEC_TC_20
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 27-Jan-2017
- Completion Date
- 27-Jan-2017
Relations
- Effective Date
- 28-Jan-2023
- Effective Date
- 28-Jan-2023
Get Certified
Connect with accredited certification bodies for this standard
NSF International
Global independent organization facilitating standards development and certification.
UL Solutions
Global safety science company with testing, inspection and certification.
CEPREI Certification Center (Guangzhou Saibao)
Pioneer of third-party certification, subsidiary of Electronic Fifth Research Institute.
Sponsored listings
Frequently Asked Questions
EN 50267-2-2:1998 is a standard published by CLC. Its full title is "Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity". This standard covers: EN 50267-2-2 specifies the test method and procedure for the determination of the degree of acidity of gases evolved during the combustion of materials taken from electric or optical cables by measuring pH and conductivity. Note: the relevant cable standard should indicate when materials from the cable should be tested
EN 50267-2-2 specifies the test method and procedure for the determination of the degree of acidity of gases evolved during the combustion of materials taken from electric or optical cables by measuring pH and conductivity. Note: the relevant cable standard should indicate when materials from the cable should be tested
EN 50267-2-2:1998 is classified under the following ICS (International Classification for Standards) categories: 13.220.40 - Ignitability and burning behaviour of materials and products; 29.060.20 - Cables. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 50267-2-2:1998 has the following relationships with other standards: It is inter standard links to EN 60754-1:2014, EN 60754-2:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 50267-2-2:1998 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 2014/35/EU, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 50267-2-2:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-1999
Splošne metode za preskušanje kablov v požarnih razmerah - Ugotavljanje
nastajanja plinov pri gorenju kabelskih materialov - 2-2. del: Postopki -
Ugotavljanje stopnje kislosti plinov za materiale z merjenjem pH in prevodnosti
Common test methods for cables under fire conditions - Tests on gases evolved during
combustion of materials from cables - Part 2-2: Procedures - Determination of degree of
acidity of gases for materials by measuring pH and conductivity
Allgemeine Prüfverfahren für das Verhalten von Kabeln und isolierten Leitungen im
Brandfall - Prüfung der bei der Verbrennung der Werkstoffe von Kabeln und isolierten
Leitungen entstehenden Gase - Teil 2-2: Prüfverfahren - Bestimmu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...