EN 61196-10-1:2014

SLOVENSKI STANDARD
01-april-2015
Komunikacijski koaksialni kabli - 10-1. del: Okvirna podrobna specifikacija
poltogih kablov s politetrafluoretilenskim (PTFE) dielektrikom (IEC 61196-10-
1:2014)
Coaxial communication cables - Part 10-1: Blank detail specification for semi-rigid cables
with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-10-1:2014)
Koaxiale Kommunikationskabel - Teil 10-1: Vordruck für Bauartspezifikation für halb-
starre Kabel mit Polytetrafluorethylen- (PTFE-)Isolation (IEC 61196-10-1:2014)
Câbles coaxiaux de communication - Partie 10-1: Spécification particulière-cadre relative
aux câbles semi-rigides comportant un diélectrique polytétrafluoroéthylène (PTFE) (CEI
61196-10-1:2014)
Ta slovenski standard je istoveten z: EN 61196-10-1:2014
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61196-10-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2014
ICS 33.120.10
English Version
Coaxial communication cables -
Part 10-1: Blank detail specification for semi-rigid cables
with polytetrafluoroethylene (PTFE) dielectric
(IEC 61196-10-1:2014)
Câbles coaxiaux de communication -  Koaxiale Kommunikationskabel -
Partie 10-1: Spécification particulière-cadre relative aux Teil 10-1: Vordruck für Bauartspezifikation für halb-starre
câbles semi-rigides comportant un diélectrique Kabel mit Polytetrafluorethylen- (PTFE-)Isolation
polytétrafluoroéthylène (PTFE) (IEC 61196-10-1:2014)
(CEI 61196-10-1:2014)
This European Standard was approved by CENELEC on 2014-10-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61196-10-1:2014 E
Foreword
The text of document 46A/1214/FDIS, future edition 1 of IEC 61196-10-1, prepared by
SC 46A "Coaxial cables" of IEC/TC 46 "Cables, wires, waveguides, R.F. connectors, R.F. and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 61196-10-1:2014.

The following dates are fixed:
• latest date by which the document has to be (dop) 2015-07-30
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2017-10-30
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61196-10-1:2014 was approved by CENELEC as a
European Standard without any modification.

- 3 - EN 61196-10-1:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
IEC 61196-1 2005 Coaxial communication cables - - -
Part 1: Generic specification - General,
definitions and requirements
IEC 61196-10 2014 Coaxial communication cables - - -
Part 10: Sectional specification for semi-
rigid cables with polytetrafluoroethylene
(PTFE) dielectric
IEC 61196-10-1 ®
Edition 1.0 2014-09
INTERNATIONAL
STANDARD
Coaxial communication cables –

Part 10-1: Blank detail specification for semi-rigid cables with

polytetrafluoroethylene (PTFE) dielectric

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
J
ICS 33.120.10 ISBN 978-2-8322-1863-1

– 2 – IEC 61196-10-1:2014 © IEC 2014
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Guidance for the preparation of detail specifications . 5
4 Blank detail specification . 6
Annex A (normative) Maximum attenuation . 9

IEC 61196-10-1:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
COAXIAL COMMUNICATION CABLES –

Part 10-1: Blank detail specification for semi-rigid cables
with polytetrafluoroethylene (PTFE) dielectric

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
...