EN 62132-2:2011

SLOVENSKI STANDARD
01-maj-2011
Integrirana vezja - Meritve elektromagnetne odpornosti - 2. del: Meritev odpornosti
proti sevanju - Metoda s celico TEM in širokopasovno celico TEM (IEC 62132-
2:2010)
Integrated circuits - Measurement of electromagnetic immunity - Part 2: Measurement of
radiated immunity - TEM cell and wideband TEM cell method (IEC 62132-2:2010)
Integrierte Schaltungen - Messung der elektromagnetischen Störfestigkeit - Teil 2:
Messung der Störfestigkeit bei Einstrahlungen - TEM-Zellen- und Breitband-
TEMZellenverfahren (IEC 62132-2:2010)
Circuits intégrés - Mesure de l'immunité électromagnétique - Partie 2: Mesure de
l'immunité rayonnée - Méthode de cellule TEM et cellule TEM à large bande (CEI 62132-
2:2010)
Ta slovenski standard je istoveten z: EN 62132-2:2011
ICS:
31.200 Integrirana vezja, Integrated circuits.
mikroelektronika Microelectronics
33.100.20 Imunost Immunity
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62132-2
NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM
ICS 31.200
English version
Integrated circuits -
Measurement of electromagnetic immunity -
Part 2: Measurement of radiated immunity -
TEM cell and wideband TEM cell method
(IEC 62132-2:2010)
Circuits intégrés -  Integrierte Schaltungen -
Mesure de l'immunité électromagnétique - Messung der elektromagnetischen
Partie 2: Mesure de l'immunité rayonnée - Störfestigkeit -
Méthode de cellule TEM et cellule TEM à Teil 2: Messung der Störfestigkeit bei
large bande Einstrahlungen -
(CEI 62132-2:2010) TEM-Zellen- und Breitband-TEM-
Zellenverfahren
(IEC 62132-2:2010)
This European Standard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62132-2:2011 E
Foreword
The text of document 47A/838/FDIS, future edition 1 of IEC 62132-2, prepared by SC 47A, Integrated
circuits, of IEC TC 47, Semiconductor devices, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 62132-2 on 2011-01-02.
This part of EN 62132 is to be read in conjunction with EN 62132-1.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-10-02
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-01-02
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62132-2:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
[7] IEC 61000-4-3:2006 NOTE  Harmonized as EN 61000-4-3:2006 (not modified).
IEC 61000-4-3:2006/A1:2007 NOTE  Harmonized as EN 61000-4-3:2006/A1:2008 (not modified).
[8] IEC 61000-4-6:2008 NOTE  Harmonized as EN 61000-4-6:2009 (not modified).
[9] IEC 61000-4-20:2003 NOTE  Harmonized as EN 61000-4-20:2003 (not modified).
[10] CISPR 16-1-1:2006 NOTE  Harmonized as EN 55016-1-1:2007 (not modified).
[12] CISPR 16-1-5:2003 NOTE  Harmonized as EN 55016-1-5:2004 (not modified).
[13] CISPR 16-2-1:2008 NOTE  Harmonized as EN 55016-2-1:2009 (not modified).
[15] CISPR 16-2-3:2006 NOTE  Harmonized as EN 55016-2-3:2006 (not modified).
[16] CISPR 16-2-4:2003 NOTE  Harmonized as EN 55016-2-4:2004 (not modified).
__________
- 3 - EN 62132-2:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60050-131 2002 International Electrotechnical Vocabulary - -
(IEV) -
Part 131: Circuit theory
IEC 60050-161 1990 International Electrotechnical Vocabulary - -
(IEV) -
Chapter 161: Electromagnetic compatibility

IEC 61967-2 - Integrated circuits - Measurement of EN 61967-2 -
electromagnetic emissions,
150 kHz to 1 GHz -
Part 2: Measurement of radiated emissions -
TEM cell and wideband TEM cell method

IEC 62132-1 2006 Integrated circuits - Measurement of EN 62132-1 2006
electromagnetic immunity, + corr. November 2006
150 kHz to 1 GHz -
Part 1: General conditions and definitions

IEC 62132-2 ®
Edition 1.0 2010-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Integrated circuits – Measurement of electromagnetic immunity –
Part 2: Measurement of radiated immunity – TEM cell and wideband TEM cell
method
Circuits intégrés – Mesure de l’immunité electromagnétique –
Partie 2: Mesure de l’immunité rayonnée – Méthode de cellule TEM et cellule
TEM à large bande
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
T
CODE PRIX
ICS 31.200 ISBN 978-2-88910-624-0
– 2 – 62132-2 © IEC:2010
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 Terms and definitions .5
4 General .6
5 Test conditions .7
6 Test equipment.7
6.1 General .7
6.2 Cables.7
6.3 RF disturbance source .7
6.4 TEM cell.8
6.5 Gigahertz TEM cell.8
6.6 50-Ω termination .8
6.7 DUT monitor.8
7 Test set-up .8
7.1 General .8
7.2 Test set-up details.8
7.3 EMC test board .10
8 Test procedure .10
8.1 General .10
8.2 Immunity measurement .10
8.2.1 General .10
8.2.2 RF disturbance signals .10
8.2.3 Test frequencies.11
8.2.4 Test levels and dwell time .11
8.2.5 DUT monitoring .11
8.2.6 Detail procedure .11
9 Test report.12
Annex A (normative) Field strength characterization procedure.13
Annex B (informative) TEM CELL and wideband TEM cell descriptions.21
Bibliography.22

Figure 1 – TEM and GTEM cell cross-section .9
Figure 2 – TEM cell test set-up .9
Figure 3 – GTEM cell test set-up.10
Figure 4 – Immunity measurement procedure flowchart .12
Figure A.1 – E-field characterization test fixture.14
Figure A.2 – The electric field to voltage transfer function.16
Figure A.3 – H-field characterization test fixture.19
Figure A.4 – The magnetic field to voltage transfer function .20

62132-2 © IEC:2010 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INTEGRATED CIRCUITS – MEASUREMENT OF
ELECTROMAGNETIC IMMUNITY –
Part 2: Measurement of radiated immunity –
TEM cell and wideband TEM cell method

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access
...