EN 60384-14-2:2016

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Condensateurs fixes utilisés dans les équipements électroniques - Partie 14-2: Spécification particulière cadre - Condensateurs fixes d'antiparasitage et raccordement à l'alimentation - Essais de sécurité uniquementFixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only (IEC 60384-14-2:2016)31.060.10Fiksni kondenzatorjiFixed capacitorsICS:Ta slovenski standard je istoveten z:EN 60384-14-2:2016SIST EN 60384-14-2:2016en01-september-2016SIST EN 60384-14-2:2016SLOVENSKI
STANDARDSIST EN 60384-14-2:20051DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 60384-14-2
May 2016 ICS 31.060.10
Supersedes
EN 60384-14-2:2004
English Version
Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only (IEC 60384-14-2:2016)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 14-2: Spécification particulière cadre - Condensateurs fixes d'antiparasitage et raccordement à l'alimentation - Essais de sécurité uniquement (IEC 60384-14-2:2016)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 14-2: Vordruck für Bauartspezifikation - Kondensatoren zur Unterdrückung elektromagnetischer Störungen, geeignet für Netzbetrieb - Nur Sicherheitsprüfungen (IEC 60384-14-2:2016) This European Standard was approved by CENELEC on 2016-05-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60384-14-2:2016 E SIST EN 60384-14-2:2016

The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-02-12 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-05-12
This document supersedes EN 60384-14-2:2004.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 60384-14-2:2016 was approved by CENELEC as a European Standard without any modification. SIST EN 60384-14-2:2016

Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60384-1 2016
Fixed capacitors for use in electronic equipment - Part 1: Generic specification EN 60384-1 2016
IEC 60384-14 2013
Fixed capacitors for use in electronic equipment -- Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains EN 60384-14 2013
IEC 60384-14-1 -
Fixed capacitors for use in electronic equipment - Part 14-1: Blank detail specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZ EN 60384-14-1 -
IEC 61193-2 2007
Quality assessment systems -- Part 2: Selection and use of sampling plans for inspection of electronic components and packages EN 61193-2 2007
IEC 60384-14-2 Edition 2.0 2016-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment –
Part 14-2: Blank detail specification – Fixed capacitors for electromagnetic interference suppression and connection to the supply mains – Safety tests only
Condensateurs fixes utilisés dans les équipements électroniques –
Partie 14-2: Spécification particulière cadre – Condensateurs fixes d'antiparasitage et raccordement à l'alimentation – Essais de sécurité uniquement
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 31.060.10
ISBN 978-2-8322-3273-6
– 2 – IEC 60384-14-2:2016  IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 0 Blank detail specification . 5 0.1 General . 5 0.2 Identification of the detail specification . 5 0.3 Identification of the capacitor . 5 1 General data . 7 1.1 Recommended method(s) of mounting (to be inserted) . 7 1.2 Dimensions . 7 1.3 Ratings and characteristics . 7 1.4 Normative references . 7 1.5 Marking . 8 1.6 Ordering information . 8 1.7 Additional information (not required for inspection purposes) . 8 1.8 Additional or increased severities or requirements to those specified in the generic and/or sectional specification . 8 2 Inspection requirements . 8 2.1 Procedures . 8 2.2 Test schedules . 8 2.2.1 Initial approval . 8 2.2.2 Requalification . 8 Annex A (normative)
Declaration of design . 12
Table 1 – Other characteristics . 8 Table 2 – Initial approval test schedule for safety tests only (1 of 2) . 9 Table 3 – Conformance test schedule: lot-by-lot . 11
IEC 60384-14-2:2016  IEC 2016 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 14-2: Blank detail specification –
Fixed capacitors for electromagnetic interference suppression
and connection to the supply mains – Safety tests only
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-14-2 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This second edition cancels and replaces the first edition published in 2004 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: – The permitted number of non-conforming items in Table 2 is always zero following the sectional specification IEC 60384-14:2013. SIST EN 60384-14-2:2016

– 4 – IEC 60384-14-2:2016  IEC 2016 The text of this standard is based on the following documents: FDIS Report on voting 40/2446/FDIS 40/2459/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of all parts in the IEC 60384 series, published under the general title Fixed capacitors for use in electronic equipment, can be found on the IEC website. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This International Standard is to be used in conjunction with IEC 60384-1:2016. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed, • withdrawn, • replaced by a revised edition, or • amended.
IEC 60384-14-2:2016  IEC 2016 – 5 – INTRODUCTION 0 Blank detail specification 0.1 General This blank detail specification forms the basis for a uniform procedure for a common International Safety Mark. It implements the approval schedule for safety tests in IEC 603
...