EN 60603-7:2009/A1:2011

SLOVENSKI STANDARD
01-marec-2012
Konektorji za elektronsko opremo - 7. del: Podrobna specifikacija za 8-redne,
nezaslonjene, proste in fiksne konektorje
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded,
free and fixed connectors
Steckverbinder für elektronische Einrichtungen - Teil 7: Bauartspezifikation für
ungeschirmte freie und feste Steckverbinder, 8polig
Connecteurs pour équipements électroniques - Partie 7: Spécification particulière pour
les fiches et les embases non écrantées à 8 voies
Ta slovenski standard je istoveten z: EN 60603-7:2009/A1:2011
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60603-7/A1
NORME EUROPÉENNE
November 2011
EUROPÄISCHE NORM
ICS 31.220.01
English version
Connectors for electronic equipment -
Part 7: Detail specification for 8-way, unshielded,
free and fixed connectors
(IEC 60603-7:2008/A1:2011)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Partie 7: Spécification particulière Teil 7: Bauartspezifikation für
pour les fiches et les embases ungeschirmte freie und feste
non écrantées à 8 voies Steckverbinder, 8polig
(CEI 60603-7:2008/A1:2011) (IEC 60603-7:2008/A1:2011)

This amendment A1 modifies the European Standard EN 60603-7:2009; it was approved by CENELEC on
2011-11-03. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60603-7:2009/A1:2011 E

Foreword
The text of document 48B/2145/CDV, future edition 3 of IEC 60603-7:2008/A1, prepared by SC 48B,
“Connectors”, of IEC/TC 48, “Electromechanical components and mechanical structures for electronic
equipment” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2012-08-03
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2014-11-03

standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60603-7:2008/A1:2011 was approved by CENELEC as a
European Standard without any modification.

IEC 60603-7 ®
Edition 3.0 2011-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Connectors for electronic equipment –
Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

Connecteurs pour équipements électroniques –
Partie 7: Spécification particulière pour les fiches et les embases non écr
...