EN 60475:2011

SLOVENSKI STANDARD
01-marec-2012
0HWRGDY]RUþHQMDL]RODFLMVNLKWHNRþLQ
Method of sampling insulating liquids
Verfahren zur Probennahme von Isolierflüssigkeiten
Méthode d'échantillonnage des liquides isolants
Ta slovenski standard je istoveten z: EN 60475:2011
ICS:
29.040.01 Izolacijski fluidi na splošno Insulating fluids in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60475
NORME EUROPÉENNE
December 2011
EUROPÄISCHE NORM
ICS 29.040
English version
Method of sampling insulating liquids
(IEC 60475:2011)
Méthode d'échantillonnage des liquides Verfahren zur Probennahme von
isolants Isolierflüssigkeiten
(CEI 60475:2011) (IEC 60475:2011)

This European Standard was approved by CENELEC on 2011-11-24. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60475:2011 E
Foreword
The text of document 10/848/FDIS, future edition 2 of IEC 60475, prepared by IEC/TC 10 "Fluids for
electrotechnical applications" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60475:2011.
The following dates are fixed:
(dop) 2012-08-24
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2014-11-24
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60475:2011 was approved by CENELEC as a European
Standard without any modification.

- 3 - EN 60475:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60567 2011 Oil-filled electrical equipment - Sampling of EN 60567 2011
gases and analysis of free and dissolved
gases - Guidance
IEC 60970 - Insulating liquids - Methods for counting and EN 60970 -
sizing particles
IEC 60475 ®
Edition 2.0 2011-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Method of sampling insulating liquids

Méthode d'échantillonnage des liquides isolants

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX U
ICS 29.040 ISBN 978-2-88912-767-2

– 2 – 60475 © IEC:2011
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General principles for the sampling of insulating liquids . 7
4.1 New insulating liquids in delivery containers . 7
4.1.1 Place of sampling . 7
4.1.2 Quantity of sample to be taken . 7
4.1.3 Sampling equipment . 7
4.1.4 Sampling procedure. 11
4.2 Sampling of oil from oil-filled equipment . 13
4.2.1 General remarks . 13
4.2.2 Sampling of oil by syringe . 19
4.2.3 Sampling of oil by ampoule . 20
4.2.4 Sampling of oil by flexible metal bottles . 21
4.2.5 Sampling of oil by glass and rigid metal bottles . 22
4.2.6 Sampling of oil by plastic bottles . 23
4.3 Storage and transportation of samples . 23
4.4 Labelling of samples . 23
Annex A (informative) Procedure for sampling at intermediate levels (making up of the
average sample) . 25
Annex B (informative) Procedure for testing the integrity of the syringes . 26

Figure 1 – Thief dipper . 8
Figure 2 – Cream dipper . 9
Figure 3 – Pipette . 10
Figure 4 – Siphon . 10
Figure 5 – Sampling of oil by syringe . 15
Figure 6 – Sampling of oil by ampoule . 16
Figure 7 – Sampling of oil by bottle . 17

Table 1 – Types of samples of new insulating liquids . 11
Table 2 – Sample containers for oil tests (Y = Yes) . 18
Table 3 – Information required on oil sample labels . 24

60475 © IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
METHOD OF SAMPLING INSULATING LIQUIDS

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60475 has been prepared by IEC technical committee 10: Fluids
for electrotechnical applications.
This second edition cancels and replaces the first edition, published in 1974, and constitutes
a technical revision.
The main changes with respect to the previous edition are listed below:
– since the publication of the first edition of this standard, askarels have been banned and
therefore have been withdrawn from this second edition;
– recommendations concerning general health, safety and environmental protection have
been added as an Introduction;
– the first edition was mainly about sampling from drums and tank cars. This second edition
addresses in more detail the sampling of oil from electrical equipment, using various types
of sampling devices appropriate for the different types of oil tests to be performed in the
laboratory, including dissolved gas analysis (DGA).

– 4 – 60475 © IEC:2011
The text of this standard is based on the following documents:
FDIS Report on voting
10/848/FDIS 10/871/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
60475 © IEC:2011 – 5 –
INTRODUCTION
General caution, health, safety and environmental protection
This International Standard does not purport to address all the safety problems associated
with its use. It is the responsibility of the user of the standard to establish appropriate health
and safety practices and determine the applicability of regulatory limitations prior to use.
The insulating oils which are the subject of this standard should be handled with due regard to
personal hygiene. Direct contact with the eyes may cause irritation. In the case of eye
contact, irrigation with copious quantities of clean running water should be carried out and
medical advice sought.
...