EN 61000-3-3:2013/A2:2021

SLOVENSKI STANDARD
01-februar-2022
Elektromagnetna združljivost (EMC) - 3-3. del: Mejne vrednosti - Omejitev
vrednosti kolebanja napetosti in flikerja v nizkonapetostnih napajalnih sistemih za
opremo z naznačenim tokom do 16 A in ni priključena pod posebnimi pogoji -
Dopolnilo A2
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes,
voltage fluctuations and flicker in public low-voltage supply systems, for equipment with
rated current ≤16 A per phase and not subject to conditional connection
Compatibilté électromagnétique (CEM) - Partie 3-3: Limites - Limitation des variations de
tension, des fluctuations de tension et du papillotement dans les réseaux publics
d'alimentation basse tension, pour les matériels ayant un courant assigné ≤16 A par
phase et non soumis à un raccordement conditionnel
Ta slovenski standard je istoveten z: EN 61000-3-3:2013/A2:2021
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61000-3-3:2013/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2021
ICS 33.100.10
English Version
Electromagnetic compatibility (EMC) - Part 3-3: Limits -
Limitation of voltage changes, voltage fluctuations and flicker in
public low-voltage supply systems, for equipment with rated
current ≤16 A per phase and not subject to conditional
connection
(IEC 61000-3-3:2013/A2:2021)
Compatibilté électromagnétique (CEM) - Partie 3-3: Limites Elektromagnetische Verträglichkeit (EMV) - Teil 3-3:
- Limitation des variations de tension, des fluctuations de Grenzwerte - Begrenzung von Spannungsänderungen,
tension et du papillotement dans les réseaux publics Spannungsschwankungen und Flicker in öffentlichen
d'alimentation basse tension, pour les matériels ayant un Niederspannungs-Versorgungsnetzen für Geräte mit einem
courant assigné ≤16 A par phase et non soumis à un Bemessungsstrom ≤ 16 A je Leiter, die keiner
raccordement conditionnel Sonderanschlussbedingung unterliegen
(IEC 61000-3-3:2013/A2:2021) (IEC 61000-3-3:2013/A2:2021)
This amendment A2 modifies the European Standard EN 61000-3-3:2013; it was approved by CENELEC on 2021-04-29. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61000-3-3:2013/A2:2021 E

European foreword
The text of document 77A/1075/CDV, future IEC 61000-3-3/A2, prepared by SC 77A "EMC - Low
frequency phenomena" of IEC/TC 77 "Electromagnetic compatibility" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 61000-3-3:2013/A2:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-05-05
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-11-05
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61000-3-3:2013/A2:2021 was approved by CENELEC as a
European Standard without any modification.

IEC 61000-3-3 ®
Edition 3.0 2021-03
INTERNATIONAL
STANDARD
AMENDMENT 2
Electromagnetic compatibility (EMC) –

Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker

in public low-voltage supply systems, for equipment with rated current ≤ 16 A

per phase and not subject to conditional connection

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.100.10 ISBN 978-2-8322-9600-4

– 2 – IEC 61000-3-3:2013/AMD2:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTROMAGNETIC COMPATIBILITY (EMC) –

Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and
flicker in public low-voltage supply systems, for equipment with rated
current ≤ 16 A per phase and not subject to conditional connection

AMENDMENT 2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 2 to IEC 61000-3-3:2013 has been prepared by subcommittee 77A: EMC – Low
frequency phenomena, of IEC technical committee 77:Electromagnetic compatibility.
The text of this Amendment is based on the following documents:
CDV Report on voting
77A/1075/CDV 77A/1093/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Amendment is English.

IEC 61000-3-3:2013/AMD2:2021 – 3 –
© IEC 2021
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with
...