iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60669-2-1:2000/IS1:2004

(Main)

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches

Applies to electronic switches and to associated electronic extension units for household and similar fixed electrical installations either indoors or outdoors.

Schalter für Haushalt und ähnliche ortsfeste elektrische Installationen - Teil 2-1: Besondere Anforderungen - Elektronische Schalter

Interrupteurs pour installations électriques fixes domestiques et analogues - Partie 2-1: Prescriptions particulières - Interrupteurs électroniques

S'applique aux interrupteurs électroniques et aux périphériques électroniques associées pour installations domestiques et installations électriques fixes analogues soit intérieures, soit extérieures.

Tolmačenje 101. točke standarda EN 60669-2-1:2000 + A2:2001 "Stikala za gospodinjstvo in podobne nepremične električne inštalacije – 2-1. del: Posebne zahteve – Elektronska stikala"

General Information

Status
Withdrawn
Publication Date
27-Jul-2004
Technical Committee
CLC/TC 23BX - CLC_TC_23BX
Drafting Committee
IEC/SC 23B - IEC_SC_23B
Parallel Committee
IEC/SC 23B - IEC_SC_23B
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Jul-2009
Completion Date
01-Jul-2009
Ref Project
SIST EN 60669-2-1:2001/IS1:2006 - Interpretation of Clause 101 of EN 60669-2-1:2000

Relations

Replaced By
EN 60669-2-1:2004 - Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
Effective Date
28-Jan-2023
Revised
EN 60669-2-1:2000 - Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
Effective Date
29-Jan-2023

Buy Standard

EN 60669-2-1:2001/IS1:2006EN 60669-2-1:2001/IS1:2006
PreviousNext
Addendum
EN 60669-2-1:2001/IS1:2006
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI SIST EN 60669-2-
1:2001/IS1:2006
STANDARD
januar 2006
Tolmačenje 101. točke standarda EN 60669-2-1:2000 + A2:2001 "Stikala za
gospodinjstvo in podobne nepremične električne inštalacije – 2-1. del:
Posebne zahteve – Elektronska stikala"
(istoveten EN 60669-2-1:2000/IS1:2004)
Interpretation of Clause 101 of EN 60669-2-1:2000 + A2:2001 'Switches for
household and similar fixed electrical installations – Part 2-1: Particular
requirements – Electronic switches'
ICS 29.120.40 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EN 60669-2-1/IS1
Interpretation Sheet 1
EN 60669-2-1:2000
English version
___________
Foreword
This Interpretation Sheet to the European Standard EN 60669-2-1:2000 was prepared by the Interpr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62305-2:2024(Main)
Protection against lightning - Part 2: Risk management
kSIST FprEN IEC 62305-2:2024

IEC 62305-2:2024 is applicable to the risk management of a structure due to lightning flashes to earth. Its purpose is to provide a procedure for the evaluation of such a risk. Once an upper tolerable limit for the risk has been selected, this procedure provides a means for the selection of appropriate protection measures to be adopted to reduce the risk to or below the tolerable limit. This third edition cancels and replaces the second edition, published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) The concept of a single risk, to combine loss of human life and loss due to fire, has been introduced. b) The concept of frequency of damage that can impair the availability of the internal systems within the structure has been introduced. c) The lightning ground strike-point density NSG has been introduced replacing the lightning flash density NG in the evaluation of expected average annual number of dangerous events. d) Reduction of a few risk components can be achieved by the use of preventive temporary measures activated by means of a thunderstorm warning system (TWS) compliant with IEC 62793. The risk of direct strike to people in open areas has been introduced, considering the reduction of that risk using a TWS.

  • Draft
    123 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60730-1:2016/A11:2024(Amendment)
Automatic electrical controls - Part 1: General requirements
SIST EN 60730-1:2016/oprAA:2022

2021-09-24: This prAA includes common mods to EN 60730-1:2016/A2 (PR=67139)

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62305-3:2024(Main)
Protection against lightning - Part 3: Physical damage to structures and life hazard
kSIST FprEN IEC 62305-3:2024

IEC 62305-3:2024 provides the requirements for protection of a structure against physical damage by means of a lightning protection system (LPS), and for protection against injury to human beings due to touch and step voltages in the vicinity of an LPS (see IEC 62305-1). This document is applicable to the: a) design, installation, inspection and maintenance of an LPS for structures without limitation of their height, b) establishment of measures for protection against injury to human beings primarily due to touch and step voltages. This third edition cancels and replaces the second edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Minimum thicknesses of metal sheets or metal pipes are given in Table 4 for air-termination systems where it is necessary to prevent hot-spot problems. Maximum temperature rises ΔT (K) and time duration t50 (s) for different thicknesses and long strokes are also given. b) Cross-reference to the IEC 62561 series is made for the use of reliable, stable, safe and appropriate LPS components. c) The application of two methods – general and simplified – for separation distance calculation is clarified. d) Some changes to the requirements for continuity of steel reinforcement are made. e) Annex C is revised to address comments from IEC subcommittee 31J. f) Revision of positioning of air-termination conductors are modified according to the three accepted methods. A more precise description of the methods for positioning of the air-termination systems are made according to the complexity of structures to be protected. The main text has been simplified, Annex A has been deleted and all detailed information has been moved to Annex D. g) Information on the protection of green roofs is introduced in Annex D. h) Information on the protection of protruding parts on facades of tall buildings is introduced in Annex D. i) a new definition of “electrically insulated LPS” has been introduced to distinguish it from an LPS both electrically and physically isolated from the structure, with a slight modification of the other LPS definitions.

  • Draft
    135 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50546:2024(Main)
Railway applications - Rolling Stock - Three-phase shore (external) supply system for rail vehicles and its connectors
kSIST prEN 50546:2024

The shore supply system is used while the rolling stock is standing still within depots and sidings location for providing power to the AC auxiliary loads (which can include battery charging) when the primary power supply (contact line) is not available or used. This document: - specifies requirements to the shore supply and to the rolling stock for safe operation on shore supply operation; - specifies the requirements to ensure compatibility of class C0 and C1 train types as given in CLC/TS 50534:2010 systems and three-phase shore power supply systems; - provides a complete system design for 63/125 A shore supplies including the interfaces (power and control loop) between shore supply and rolling stock; - specifies the requirements with regards to interoperability with AC and DC fed traction systems in order to prevent undesired stray currents and adverse interaction with signalling systems when operating on shore supply; - defines the electrical characteristics of the 63/125 A shore power supply; - defines the 63/125 A connectors and its intermateability to provide interoperability for rolling stock that is to run across borders; - defines the 600 A connector and its intermateability; - can be used for other type of rail vehicles and purposes, if agreed by the manufacturer and customer - does not apply to shore supplies to move the rolling stock; - does not describe the 600 A shore supply system. NOTE 1 The 600 A connector is the existing UK standard three-phase shore supply connector which has a long service history. NOTE 2 The connectors are dimensioned using standard rolling stock cables as set out in EN 50264-3-1:2008. NOTE 3 Examples of other usage and rail vehicles are: e.g. light rail vehicles, class A train types, traction battery charging etcetera.

  • Draft
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60127-6:2024(Main)
Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
kSIST FprEN IEC 60127-6:2023

IEC 60127-6:2023 is available as IEC 60127-6:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60127-6:2023 is applicable to fuse-holders for miniature cartridge fuse-links according to IEC 60127-2, sub-miniature fuse-links according to IEC 60127-3, universal modular fuse-links to IEC 60127-4 and miniature fuse-links for special applications to IEC 60127-7 for the protection of electric appliances, electronic equipment and component parts thereof, normally intended for use indoors. NOTE Requirements for fuse-holders for miniature fuse-links complying with IEC 60127-4 and IEC 60127-7 are under consideration. It does not apply to fuse holders for fuses completely covered by the subsequent parts of IEC 60269-1.

  • Draft
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60127-1:2024(Main)
Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
kSIST FprEN IEC 60127-1:2023

This part of IEC 60127 covers the general requirements and tests applicable to all types of miniature fuse-links (e.g. cartridge fuse-links, sub-miniature fuse-links, universal modular fuse-links and miniature fuse-links for special applications) for the protection of electric appliances, electronic equipment and component parts thereof normally intended to be used indoors. This standard does not apply to fuses intended for the protection of low-voltage electrical installations. These are covered by IEC 60269, Low Voltage Fuses. Specific details covering each major subdivision are given in subsequent parts. This standard does not apply to fuses for appliances intended to be used under special conditions, such as in a corrosive or explosive atmosphere. The object of this standard is a) to establish uniform requirements for miniature fuses so as to protect appliances or parts of appliances in the most suitable way, b) to define the performance of the fuses, so as to give guidance to designers of electrical appliances and electronic equipment and to ensure replacement of fuse-links by those of similar dimensions and characteristics, c) to define methods of testing, d) to define maximum sustained dissipation of fuse-links to ensure good compatibility of stated power acceptance when used with fuse-holders according to this standard (see IEC 60127-6).

  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61869-1:2024(Main)
Instrument transformers - Part 1: General requirements
SIST EN IEC 61869-1:2024

IEC 61869-1:2023 is applicable to newly manufactured instrument transformers intended for applications where the nominal voltage is higher than 1 kV AC or 1,5 kV DC, with an analogue or a digital secondary signal for measuring, protection and control purposes, with rated frequencies from 15 Hz to 400 Hz, or for DC applications. The general requirements for instrument transformers for applications in LV systems (nominal voltage ≤ 1 kV AC or ≤ 1,5 kV DC) are covered by IEC 61869-201. This part of IEC 61869 is a product family standard and covers general requirements only. For each type of instrument transformer, the product standard is composed of this document and the relevant specific product standard. This part of IEC 61869 contains the requirements for the limits of the errors both for analogue and digital secondary signal. The other characteristics of a digital interface for instrument transformer are standardised in IEC 61869-9 as an application of the IEC 61850 horizontal standard series, covering communication networks and systems for power utility automation. This part of IEC 61869 considers bandwidth requirements. The accuracy requirements on harmonics and requirements for the anti-aliasing filter are specified in 5.7. IEC 61869-1:2023 cancels and replaces the first edition published in 2007 and IEC 61869 6:2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) merger with IEC 61869-6:2016; b) new scope: equipment for HV applications with a nominal voltage > 1 kV AC or 1,5 kV DC; c) new classification of some special tests as type tests or routine test; d) additional type tests, additional special tests and new clause for commissioning tests; e) new annexes E, F, G and I.

  • Draft
    128 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61184:2017/A2:2024(Amendment)
Bayonet lampholders
SIST EN 61184:2018/A2:2024
  • Draft
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61362:2024(Main)
Guidelines to specification of hydraulic turbine governing systems
SIST EN IEC 61362:2024

IEC 61362:2024 includes relevant technical data necessary to describe hydraulic turbine governing systems and to define their performance. It is aimed at unifying and thus facilitating the selection of relevant parameters in bidding specifications and technical bids. It will also serve as a basis for setting up technical guarantees. The scope of this standard is restricted to the turbine governing level. Additionally some remarks about the control loops of the plant level and about primary and secondary frequency control (see also Annex B) are made for better understanding without making a claim to be complete. Important topics covered are: - speed, power, water level, opening and flow (discharge) control for reaction and impulse-type turbines including double regulated machines; - means of providing actuating energy; - safety devices for emergency shutdown. To facilitate the setting up of specifications, this guide also includes data sheets, which are to be filled out by the customer and the supplier in the various stages of the project and the contract. Acceptance tests, specific test procedures and guarantees are outside the scope of the guide; those topics are covered by IEC 60308. This third edition cancels and replaces the second edition published in 2012. This edition includes the following significant technical changes with respect to the previous edition: adoption of parts of IEC 60308:2005 which deal with specification matters; introduction of several new technical topics; and overall editorial revision. Keywords: Hydraulic turbine, Hydraulic turbine governing systems.

  • Draft
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60730-1:2024(Main)
Automatic electrical controls - Part 1: General requirements
SIST EN IEC 60730-1:2024

IEC 60703-1:2022 applies to automatic electrical controls for use in, on, or in association with equipment for household appliance and similar use. This document applies to - the inherent safety of automatic electrical controls, and - functional safety of automatic electrical controls and safety related systems, - controls where the performance (for example the effect of EMC phenomena) of the product can impair the overall safety and performance of the controlled system, - the operating values, operating times, and operating sequences where such are associated with equipment safety. This document specifies the requirements for construction, operation and testing of automatic electrical controls used in, on, or in association with an equipment.

  • Draft
    276 pages
    English language
    sale 10% off
    e-Library read for
    1 day