EN 60598-2-24:1998

SLOVENSKI STANDARD
01-september-2000
Svetilke - 2. del: Posebne zahteve - 24. oddelek: Svetilke z omejeno površinsko
temperaturo
Luminaires - Part 2: Particular requirements - Section 24: Luminaires with limited surface
temperatures
Leuchten - Teil 2: Besondere Anforderungen - Hauptabschnitt 24: Leuchten mit
begrenzter Oberflächentemperatur
Luminaires - Partie 2: Règles particulières - Section 24: Luminaires avec surfaces à
températures limitées
Ta slovenski standard je istoveten z: EN 60598-2-24:1998
ICS:
29.140.40 Svetila Luminaires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

NORME
CEI
INTERNATIONALE
IEC
60598-2-24
INTERNATIONAL
Première édition
STANDARD
First edition
1997-08
Luminaires –
Partie 2-24:
Règles particulières –
Luminaires avec surfaces
à températures limitées
Luminaires –
Part 2-24:
Particular requirements –
Luminaires with limited
surface temperatures
© IEC 1997 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE G
International Electrotechnical Commission

Pour prix, voir catalogue en vigueur
For price, see current catalogue

60598-2-24 © IEC:1997 – 3 –
CONTENTS
Page
FOREWORD. 5
Clause
24.1 Scope. 7
24.2 General test requirements. 7
24.3 Definitions. 9
24.4 Classification of luminaires . 9
24.5 Marking. 9
24.6 Construction. 9
24.7 Creepage distances and clearances. 11
24.8 Provision for earthing. 11
24.9 Terminals. 11
24.10 External and internal wiring. 11
24.11 Protection against electric shock. 11
24.12 Endurance test and thermal test. 11
24.13 Resistance to dust, solid objects and moisture . 13
24.14 Insulation resistance and electric strength. 13
24.15 Resistance to heat, fire and tracking . 13

Figure 1 – Symbol . 13

60598-2-24 © IEC:1997 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
––––––––
LUMINAIRES –
Part 2-24: Particular requirements –
Luminaires with limited surface temperatures

FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60598-2-24 has been prepared by subcommittee 34D: Luminaires,
of IEC technical committee 34: Lamps and related equipment.
This standard shall be read in conjuction with IEC 60598-1.
The text of this standard i
...