Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies

IEC 61800-7-301:2015 is available as IEC 61800-7-301:2015 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 61800-7-301:2015 specifies the mapping of the profile type 1 (CiA 402) specified in IEC 61800-7-201 onto different network technologies. This edition includes the following significant technical changes with respect to the previous edition: - Additional mappings to communication systems are included (Mapping to CC-Link IE Field Network and Mapping to EPA).

Elektrische Leistungsantriebssysteme mit einstellbarer Drehzahl - Teil 7-301: Generisches Interface und Nutzung von Profilen für Leistungsantriebssysteme (PDS) - Abbildung von Profil-Typ 1 auf Netzwerktechnologien

Entraînements électriques de puissance à vitesse variable - Partie 7-301: Interface générique et utilisation de profils pour les entraînements électriques de puissance - Mise en correspondance du profil de type 1 avec les technologies de réseaux

L'IEC 61800-7-301:2015 spécifie la mise en correspondance du type de profil 1 (CiA 402), décrit dans l'IEC 61800-7-201, avec les différentes technologies de réseau. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - Inclusion de mises en correspondance supplémentaires avec les systèmes de communication (Mise en correspondance avec CC-Link IE Field Network et Mise en correspondance avec EPA).

Električni pogonski sistemi z nastavljivo hitrostjo - 7-301. del: Generični vmesnik in uporaba profilov za električne pogonske sisteme - Preslikava profilov tipa 1 na omrežne tehnologije

Ta del standarda IEC 61800 določa mapiranje profila tipa 1 (CiA 402), ki ga določa standard IEC 61800-7-201, na različne omrežne tehnologije.
Funkcije, določene v tem delu standarda IEC 61800-7, niso namenjene za zagotavljanje funkcionalne varnosti. Za to so potrebni dodatni ukrepi v skladu z ustreznimi standardi, sporazumi in zakoni.
– CANopen, glej točko 5;
– CC-Link IE Field, glej točko 6;
– EPA, glej točko 7;
– EtherCAT, glej točko 8;
– ETHERNET Powerlink, glej točko 9;

General Information

Status
Published
Publication Date
11-Feb-2016
Withdrawal Date
24-Dec-2018
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
12-Feb-2016
Completion Date
12-Feb-2016

Relations

Buy Standard

Standard
EN 61800-7-301:2016
English language
160 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2016
1DGRPHãþD
SIST EN 61800-7-301:2008
(OHNWULþQLSRJRQVNLVLVWHPL]QDVWDYOMLYRKLWURVWMRGHO*HQHULþQLYPHVQLN
LQXSRUDEDSURILORY]DHOHNWULþQHSRJRQVNHVLVWHPH3UHVOLNDYDSURILORYWLSDQD
RPUHåQHWHKQRORJLMH
Adjustable speed electrical power drive systems -- Part 7-301: Generic interface and use
of profiles for power drive systems - Mapping of profile type 1 to network technologies
Ta slovenski standard je istoveten z: EN 61800-7-301:2016
ICS:
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61800-7-301

NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2016
ICS 29.200; 35.100.05 Supersedes EN 61800-7-301:2008
English Version
Adjustable speed electrical power drive systems -
Part 7-301: Generic interface and use of profiles for power drive
systems - Mapping of profile type 1 to network technologies
(IEC 61800-7-301:2015)
Entraînements électriques de puissance à vitesse variable - Elektrische Leistungsantriebssysteme mit einstellbarer
Partie 7-301: Interface générique et utilisation de profils Drehzahl - Teil 7-301: Generisches Interface und Nutzung
pour les entraînements électriques de puissance - Mise en von Profilen für Leistungsantriebssysteme (PDS) -
correspondance du profil de type 1 avec les technologies Abbildung von Profil-Typ 1 auf Netzwerktechnologien
de réseaux (IEC 61800-7-301:2015)
(IEC 61800-7-301:2015)
This European Standard was approved by CENELEC on 2015-12-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61800-7-301:2016 E

European foreword
The text of document 22G/311/FDIS, future edition 2 of IEC 61800-7-301, prepared by
SC 22G “Adjustable speed electric drive systems incorporating semiconductor power converters” of
IEC/TC 22 “Power electronic systems and equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 61800-7-301:2016.

The following dates are fixed:
• latest date by which the document has to be (dop) 2016-09-25
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-12-25
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61800-7-301:2008.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61800-7-301:2015 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61158 Series NOTE Harmonized as EN 61158 Series.
IEC 61499-1 NOTE Harmonized as EN 61499-1.
IEC 61784-1 NOTE Harmonized as EN 61784-1.
IEC 61784-2 NOTE Harmonized as EN 61784-2.
IEC 61800 Series NOTE Harmonized as EN 61800 Series.
IEC 61800-7-1:2015 NOTE Harmonized as EN 61800-7-1:2016 (not modified).
IEC 61800-7-202:2015 NOTE Harmonized as EN 61800-7-202:2016 (not modified).
IEC 61800-7-203:2015 NOTE Harmonized as EN 61800-7-203:2016 (not modified).
IEC 61800-7-204:2015 NOTE Harmonized as EN 61800-7-204:2016 (not modified).
IEC 61800-7-302:2015 NOTE Harmonized as EN 61800-7-302:2016 (not modified).
IEC 61800-7-303:2015 NOTE Harmonized as EN 61800-7-303:2016 (not modified).
IEC 61800-7-304:2015 NOTE Harmonized as EN 61800-7-304:2016 (not modified).
IEC 61915-1 NOTE Harmonized as EN 61915-1.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
-
Industrial communications subsystem EN 50325-4
based on ISO 11898 (CAN) for controller-
device interfaces -
Part 4: CANopen
-
IEC 61158-4-14 -  Industrial communication networks - EN 61158-4-14
Fieldbus specifications -
Part 4-14: Data-link layer protocol
specification - Type 14 elements
-
IEC 61158-5-12 -  Industrial communication networks - EN 61158-5-12
Fieldbus specifications -
Part 5-12: Application layer service
definition - Type 12 elements
-
IEC 61158-5-13 -  Industrial communication networks - EN 61158-5-13
Fieldbus specifications -
Part 5-13: Application layer service
definition - Type 13 elements
-
IEC 61158-5-14 -  Industrial communication networks - EN 61158-5-14
Fieldbus specifications -
Part 5-14: Application layer service
definition - Type 14 elements
-
IEC 61158-5-23 -  Industrial communication networks - EN 61158-5-23
Fieldbus specifications -
Part 5-23: Application layer service
definition - Type 23 elements
-
IEC 61158-6-12 -  Industrial communication networks - EN 61158-6-12
Fieldbus specifications -
Part 6-12: Application layer protocol
specification - Type 12 elements
-
IEC 61158-6-13 -  Industrial communication networks - EN 61158-6-13
Fieldbus specifications -
Part 6-13: Application layer protocol
specification - Type 13 elements
Publication Year Title EN/HD Year
-
IEC 61158-6-14 -  Industrial communication networks - EN 61158-6-14
Fieldbus specifications -
Part 6-14: Application layer protocol
specification - Type 14 elements
-
IEC 61158-6-23 -  Industrial communication networks - EN 61158-6-23
Fieldbus specifications -
Part 6-23: Application layer protocol
specification - Type 23 elements
-
IEC 61800-7-201 -  Adjustable speed electrical power drive EN 61800-7-201
systems -
Part 7-201: Generic interface and use of
profiles for power drive systems - Profile
type 1 specification
IEC 61800-7-301 ®
Edition 2.0 2015-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Adjustable speed electrical power drive systems –

Part 7-301: Generic interface and use of profiles for power drive systems –

Mapping of profile type 1 to network technologies

Entraînements électriques de puissance à vitesse variable –

Partie 7-301: Interface générique et utilisation de profils pour les entraînements

électriques de puissance – Mise en correspondance du profil de type 1 avec les

technologies de réseaux
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.200; 35.100.05 ISBN 978-2-8322-2930-9

– 2 – IEC 61800-7-301:2015 © IEC 2015
CONTENTS
FOREWORD . 10
INTRODUCTION . 12
1 Scope . 16
2 Normative references . 16
3 Terms, definitions and abbreviated terms . 17
3.1 Terms and definitions . 17
3.2 Abbreviated terms . 20
4 General . 21
5 Mapping to CANopen . 21
5.1 Overview. 21
5.2 Mapping of communication objects . 21
5.3 Communication parameter objects . 22
5.3.1 General . 22
5.3.2 Object 1000 : Device type . 22
h
5.3.3 Object 1029 : Error behavior . 23
h
5.3.4 Object 67FF : Single device type . 24
h
5.4 Emergency message . 24
5.5 Communication fault events . 24
5.6 Sets of pre-defined PDOs . 24
5.6.1 General . 24
5.6.2 PDO set for generic drive device . 25
5.6.3 PDO set for frequency converter . 56
5.6.4 PDO set for servo drive . 69
5.6.5 PDO set for stepper motor . 85
5.7 PDO mapping attributes . 102
6 Mapping to CC-Link IE Field Network . 106
6.1 Overview. 106
6.2 Device model . 106
6.3 Mapping of communication objects . 106
6.3.1 General . 106
6.3.2 The detailed mapping of communication objects . 106
6.3.3 FAL syntax description . 107
6.3.4 FAL transfer syntax . 108
6.4 Communication parameter objects . 112
6.4.1 General . 112
6.4.2 Object 1000 : Device type . 113
h
6.5 Sets of pre-defined PDOs . 113
6.5.1 General . 113
6.5.2 PDO set for generic drive device . 113
6.6 PDO mapping attributes . 116
7 Mapping to EPA . 116
7.1 Overview. 116
7.2 Device module .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.