EN 62290-1:2014

SLOVENSKI STANDARD
01-november-2014
äHOH]QLãNHQDSUDYH.RPDQGQRNRQWUROQLVLVWHPL]DXSUDYOMDQMHXUEDQHJD
SURPHWDGHO6LVWHPVNDQDþHODLQRVQRYQLNRQFHSWL,(&
Railway applications - Urban guided transport management and command/control
systems - Part 1: System principles and fundamental concepts
Ta slovenski standard je istoveten z: EN 62290-1:2014
ICS:
03.220.30 Železniški transport Transport by rail
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62290-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2014
ICS 45.060 Supersedes EN 62290-1:2006
English Version
Railway applications - Urban guided transport management and
command/control systems - Part 1: System principles and
fundamental concepts
(IEC 62290-1:2014)
Applications ferroviaires - Systèmes de contrôle/commande Bahnanwendungen - Betriebsleit- und
et de gestion des transports guidés urbains - Zugsicherungssysteme für den städtischen
Partie 1: Principes système et concepts fondamentaux schienengebundenen Personennahverkehr -
(CEI 62290-1:2014) Teil 1: Systemgrundsätze und grundlegende Konzepte
(IEC 62290-1:2014)
This European Standard was approved by CENELEC on 2014-08-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62290-1:2014 E
Foreword
The text of document 9/1913/FDIS, future edition 2 of IEC 62290-1, prepared by IEC/TC 9 "Electrical
equipment and systems for railways" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 62290-1:2014.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2015-05-14
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2017-08-14
the document have to be withdrawn

This document supersedes EN 62290-1:2006.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62290-1:2014 was approved by CENELEC as a European
Standard without any modification.

- 3 - EN 62290-1:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 62236 series Railway applications - Electromagnetic - -
compatibility
IEC 62278 -  Railway applications - Specification and - -
demonstration of reliability, availability,
maintainability and safety (RAMS)
IEC 62279 -  Railway applications - Communications, - -
signalling and processing systems -
Software for railway control and protection
systems
IEC 62280 -  Railway applications - Communication, - -
signalling and processing systems - Safety
related communication in transmission
systems
IEC 62290-2 -  Railway applications - Urban guided EN 62290-2 -
transport management and
command/control systems -
Part 2: Functional requirements
specification
IEC 62425 -  Railway applications - Communication, - -
signalling and processing systems - Safety
related electronic systems for signalling

IEC 62290-1 ®
Edition 2.0 2014-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Railway applications – Urban guided transport management and

command/control systems –
Part 1: System principles and fundamental concepts

Applications ferroviaires – Systèmes de contrôle/commande et de gestion des

transports guidés urbains –
Partie 1: Principes système et concepts fondamentaux

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX V
ICS 45.060 ISBN 978-2-8322-1648-4

– 2 – IEC 62290-1:2014 © IEC 2014
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 9
2 Normative references . 9
3 Terms, definitions and abbreviations . 9
3.1 Terms and definitions. 10
3.2 Abbreviations . 14
4 Concepts . 15
4.1 Urban guided transport (UGT) . 15
4.1.1 General . 15
4.1.2 Operations . 15
4.1.3 Operational facilities . 15
4.1.4 Rolling stock . 16
4.1.5 Staff . 16
4.1.6 Passengers . 16
4.2 Grade of automation . 16
4.2.1 Descriptions . 16
4.2.2 Implementation of grades of automation . 18
4.2.3 Grades of automation covered by UGTMS . 18
4.3 Operation management and supervision . 19
4.4 Interoperability, interchangeability, compatibility and adaptability . 19
4.4.1 General . 19
4.4.2 Interoperability. 19
4.4.3 Interchangeability . 19
4.4.4 Compatibility . 19
4.4.5 Adaptability . 20
5 System environment and boundaries . 20
6 General requirements and description of the basic functions . 21
6.1 General requirements . 21
6.1.1 System approach . 21
6.1.2 RAMS requirements . 21
6.1.3 Electromagnetic compatibility . 21
6.1.4 Energy saving . 21
6.1.5 Local conditions . 21
6.1.6 Intermodality between networks . 22
6.1.7 Interoperability between neighbouring UGTMS fitted networks . 22
6.1.8 Measures to ensure the movement of passengers with reduced mobility . 22
6.1.9 Nominal mode, degraded modes, emergency situation . 22
6.1.10 Basic system performances . 22
6.1.11 Requirements for upgrading GOA . 23
6.1.12 Requirements for adding new parts of line . 23
6.2 Description of the basic functions . 23
6.2.1 General . 23
6.2.2 Basic functions for train operation. 23
6.2.3 Basic functions for operation management and supervision . 26
Bibliography . 29

IEC 62290-1:2014 © IEC 2014 – 3 –

Figure 1 – The three-step process followed by the UGTMS standard . 8
Figure 2 – Example of track layout . 16
Figure 3 – System environment . 20

Table 1 – Grades of automation . 17

– 4 – IEC 62290-1:2014 © IEC 2014
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RAILWAY APPLICATIONS –
URBAN GUIDED TRANSPORT MANAGEMENT
AND COMMAND/CONTROL SYSTEMS –
Part 1: System principles and fundamental concepts

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held r
...