FprEN 14960-4
(Main)Inflatable play equipment - Part 4: Additional safety requirements and test methods for bungee runs
Inflatable play equipment - Part 4: Additional safety requirements and test methods for bungee runs
This document specifies safety requirements for inflatable bungee runs in addition to the requirements of EN 14960-1.
This document is applicable to inflatable bungee runs intended for use by persons of 1 200 mm minimum height and 120 kg maximum weight/mass.
This document specifies safety requirements for an inflatable game on which the activity is pulling horizontally against a secured bungee shock cord. It sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture and supply of the inflatable game.
This document specifies the requirements that will protect the user from hazards that they are unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated.
This document is not applicable to inflatable water- borne play and leisure equipment, domestic inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue, or other types of inflatable toys where the primary activity is not pulling horizontally against a secured bungee shock cord.
Aufblasbare Spielgeräte - Teil 4: Zusätzliche sicherheitstechnische Anforderungen und Prüfverfahren für Bungeeruns
Dieses Dokument legt zusätzlich zu den Anforderungen nach EN 14960-1 sicherheitstechnische Anforderungen für aufblasbare Bungeeruns fest.
Dieses Dokument ist für aufblasbare Bungeeruns anwendbar, die für die Benutzung durch Personen mit einer Mindestkörpergröße von 1 200 mm und einem Höchstgewicht/-masse von 120 kg vorgesehen sind.
Dieses Dokument legt sicherheitstechnische Anforderungen für ein aufblasbares Spiel fest, bei dem die Aktivität darin besteht, horizontal gegen ein befestigtes Bungee-Elastikseil anzulaufen. Es legt Maßnahmen für die Handhabung von Gefahren und auch für die Begrenzung von Unfällen der Benutzer auf ein Mindestmaß fest, die von den mit der Konstruktion, Herstellung und Lieferung des aufblasbaren Spieles befassten Stellen zu beachten sind.
Dieses Dokument legt die Anforderungen fest, durch die die Benutzer vor Gefahren geschützt werden, die diese nicht vorhersehen können, wenn sie das Gerät bestimmungsgemäß oder wie vernünftigerweise vorhersehbar benutzen.
Dieses Dokument gilt nicht für aufblasbare Spiel- und Freizeitgeräte zur Verwendung auf dem Wasser, aufblasbares Spielzeug für den privaten Gebrauch, Tragluftbauten, aufblasbare Geräte, welche ausschließlich zum Schutz und zur Rettung eingesetzt werden oder andere Arten von aufblasbarem Spielzeug, bei dem die Hauptbetätigung nicht das horizontale Anlaufen gegen ein befestigtes Bungee-Elastikseil ist.
Équipements de jeu gonflables - Partie 4 : Exigences de sécurité et méthodes d’essai supplémentaires relatives aux équipements de course à l’élastique
Le présent document spécifie des exigences de sécurité relatives aux équipements gonflables de course à l’élastique (ou « bungee run », en anglais) complémentaires des exigences énoncées dans l’EN 14960-1.
Le présent document s’applique aux équipements gonflables de course à l’élastique destinés à être utilisés par des personnes mesurant au moins 1 200 mm et pesant au maximum 120 kg.
Le présent document spécifie des exigences de sécurité relatives à un jeu gonflable dont l’activité consiste à tirer horizontalement sur une corde élastique sécurisée. Il présente, à l’intention des acteurs impliqués dans la conception, la fabrication et la fourniture de jeux gonflables, des mesures visant à faire face aux risques et également à réduire au minimum le nombre d’accidents d’utilisateurs.
Le présent document spécifie les exigences permettant de protéger l’utilisateur contre les risques qui ne sont pas raisonnablement prévisibles dans le cadre d’une utilisation normale de l’équipement.
Le présent document ne s’applique pas aux équipements ludiques de loisirs gonflables flottants, aux jouets gonflables domestiques, aux constructions pneumatiques, aux structures gonflables utilisées uniquement pour la protection, aux équipements gonflables utilisés pour le sauvetage, ni à d’autres types de jouets gonflables dont l’activité première n’est pas de tirer horizontalement sur une corde élastique sécurisée.
Napihljiva igralna oprema - 4. del: Dodatne varnostne zahteve in preskusne metode za bungee runs
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 14960-4:2022
01-december-2022
Napihljiva igralna oprema - 4. del: Dodatne varnostne zahteve in preskusne
metode za bungee runs
Inflatable play equipment. - Part 4: Additional safety requirements and test methods for
bungee runs
Aufblasbare Spielgeräte - Teil 4: Zusätzliche sicherheitstechnische Anforderungen und
Prüfverfahren für Bungeeruns
Équipements de jeu gonflables - Partie 4 : Exigences de sécurité supplémentaires pour
les équipements de course à l’élastique
Ta slovenski standard je istoveten z: prEN 14960-4
ICS:
97.190 Otroška oprema Equipment for children
97.200.50 Igrače Toys
oSIST prEN 14960-4:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 14960-4:2022
oSIST prEN 14960-4:2022
DRAFT
EUROPEAN STANDARD
prEN 14960-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2022
ICS 97.190; 97.200.50
English Version
Inflatable play equipment. - Part 4: Additional safety
requirements and test methods for bungee runs
Équipements de jeu gonflables - Partie 4 : Exigences de Aufblasbare Spielgeräte - Teil 4: Zusätzliche
sécurité supplémentaires pour les équipements de sicherheitstechnische Anforderungen und
course à l'élastique Prüfverfahren für Bungeeruns
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 136.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14960-4:2022 E
worldwide for CEN national Members.
oSIST prEN 14960-4:2022
prEN 14960-4:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Safety requirements . 7
Annex A (informative) Clauses in EN 14960-1 . 11
A.1 Clauses in EN14960-1 applicable to EN 14960-4. 11
A.2 Clauses in EN14960-1 applicable with additions in EN 14960-4 . 11
A.3 Clauses in EN14960-1 applicable with amendments in EN 14960-4 . 11
A.4 Clauses in EN 14960-1 not applicable to EN 14960-4 . 12
Bibliography . 13
oSIST prEN 14960-4:2022
prEN 14960-4:2022 (E)
European foreword
This document (prEN 14960-4:2022) has been prepared by Technical Committee CEN/TC 136 “Sports,
playground and other recreational facilities and equipment”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document is in addition to EN 14960-1, EN 14960-2 and EN 14960-3.
prEN 14960-4:2022 includes the following significant technical additions with respect to EN 14960 1, 2
and 3, and this standard series now consists of four parts.
A list of all parts of EN 14960 can be found on the CEN website.
oSIST prEN 14960-4:2022
prEN 14960-4:2022 (E)
Introduction
Play is a means by which people discover and understand the world in which they live and is an essential
element in a person’s physical and mental growth.
It is important for a person’s rounded development that, through play, they arrive at an understanding of
danger, which provides a basis for assessing safety in a variety of situations. The balance between
challenge and safety is an important consideration.
The inflatable game referred to in this document can provide different levels of challenge and excitement.
This document aims to minimize the level of risk and the possibility of serious injury while allowing
people to enjoy themselves when using inflatable equipment.
It is not the purpose of the requirements of this document to affect a person’s need to play nor to lessen
the contribution that inflatable play equipment makes either to the person’s development or meaningful
play from an educational point of view.
Where inflatable play equipment is combined with other items of play equipment, the relevant standards
for the other items of equipment should also be applied.
oSIST prEN 14960-4:2022
prEN 14960-4:2022 (E)
1 Scope
This document specifies additional safety requirements for inflatable bungee runs and should be read in
conjunction with part 1 (See Annex A)
This document is applicable to inflatable play equipment intended for use by persons of 1200mm
minimum height and 120kg maximum weight.
This document specifies safety requirements for an inflatable game on which the primary activity is
pulling horizontally against a secured bungee shock cord. It sets measures to address risks and also to
minimize accidents to users for those involved in the design, manufacture and supply of the inflatable
game.
It specifies information to be supplied with the equipment. The requirements have been laid down
bearing in mind the risk factor based on available data.
This document specifies the requirements that will protect the user from hazards that they might be
unable to foresee when using the equipment as intended, or in a manner that can be reasonably
anticipated.
This document is not applicable to inflatable water- borne play and leisure equipment, domestic
inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue,
or other types of inflatable toys where the primary activity is not pulling horizontally against a secured
bungee shock cord.
In order not to confine the application of this document to those items of equipment currently in use and
to allow freedom of design for the manufacture of new equipment, only the fundamental forms of
equipment and motion are defined in Clause 3.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 14960-1, Inflatable play equipment - Part 1: Safety re
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.