EN 1636-6:1997
(Main)Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Part 6: Practices for installation
Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Part 6: Practices for installation
This part of prEN 1636 specifies practices for installing piping systems made ofglass-reinforced thermosetting plastics based on unsaturated polyester resin (GRP-UP), with or without a thermoplastic liner, intended to be used for non-pressure drainage and sewerage. It is applicable to RP-UP piping systems for the conveyance of surface water or sewage below ground, at temperatures up to 50 oC.
Kunststoff-Rohrleitungssysteme für drucklose Entwässerungs- und Abwasserleitungen - Glasfaserverstärkte duroplastische Kunststoffe (GFK) auf der Basis von ungesättigtem Polyesterharz (UP) - Teil 6: Verfahren zur Verlegung
Dieser Teil von prEN 1636 legt Verfahren zur Verlegung von Rohrsystemen fest, die aus glasfaserverstärkten duroplastischen Kunststoffen auf der Basis von ungesättigtem Polyesterharz (GFK-UP) hergestellt und dafür vorgesehen sind, für drucklose Entwässerungs- und Abwasserleitungen verwendet zu werden. Er ist anwendbar auf GFK-UP-Rohrsysteme für den Transport von Oberflächenwasser und Abwasser bis zu Temperaturen von 50 °C.
Systèmes de canalisations en plastique pour l'évacuation et l'assainissement sans pression - Plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP) - Partie 6: Pratiques de pose
La présente partie de la prEN 1636 prescrit des pratiques pour la pose des systèmes de canalisations en plastiques thermodurcissables renforcés de verre à base de résine polyester (PRV-UP), avec ou sans gainage interne (liner) thermoplastique, destinés à être utilisés dans le domaine de l'évacuation et l'assainissement sans pression. Elle est applicable aux systèmes de canalisations PRV-UP pour le transport d'eaux de surface ou d'assainissement sans pression à des températures s'élevant jusqu'à 50 °C.
Cevni sistemi iz polimernih materialov za odpadno vodo, ki delujejo po težnostnem principu - S steklenimi vlakni okrepljeni duromerni materiali (GRP), ki temeljijo na nenasičeni poliestrski smoli (UP) - 6. del: Postopki za vgradnjo
General Information
- Status
- Withdrawn
- Publication Date
- 19-Aug-1997
- Withdrawal Date
- 09-Sep-2003
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 10-Sep-2003
- Completion Date
- 10-Sep-2003
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 1636-6:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Part 6: Practices for installation". This standard covers: This part of prEN 1636 specifies practices for installing piping systems made ofglass-reinforced thermosetting plastics based on unsaturated polyester resin (GRP-UP), with or without a thermoplastic liner, intended to be used for non-pressure drainage and sewerage. It is applicable to RP-UP piping systems for the conveyance of surface water or sewage below ground, at temperatures up to 50 oC.
This part of prEN 1636 specifies practices for installing piping systems made ofglass-reinforced thermosetting plastics based on unsaturated polyester resin (GRP-UP), with or without a thermoplastic liner, intended to be used for non-pressure drainage and sewerage. It is applicable to RP-UP piping systems for the conveyance of surface water or sewage below ground, at temperatures up to 50 oC.
EN 1636-6:1997 is classified under the following ICS (International Classification for Standards) categories: 23.040.01 - Pipeline components and pipelines in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1636-6:1997 has the following relationships with other standards: It is inter standard links to CEN/TS 14578:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1636-6:1997 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1636-6:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoff-Rohrleitungssysteme für drucklose Entwässerungs- und Abwasserleitungen - Glasfaserverstärkte duroplastische Kunststoffe (GFK) auf der Basis von ungesättigtem Polyesterharz (UP) - Teil 6: Verfahren zur VerlegungSystemes de canalisations en plastique pour l'évacuation et l'assainissement sans pression - Plastiques thermodurcissables renforcés de verre (PRV) a base de résine de polyester non saturé (UP) - Partie 6: Pratiques de posePlastics piping systems for non-pressure drainage and sewerage - Glass-reinfo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...