EN 3372-001:2007

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Bajonettkupplung, Betriebstemperatur - 65 °C bis 175 °C oder 200 °C konstant - Teil 001: Technische LieferbedingungenSérie aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes température d'utilisation - 65 °C à 175 °C ou 200 °C continu - Partie 001 : Spécification techniqueAerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 001: Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3372-001:2007SIST EN 3372-001:2009en,de01-julij-2009SIST EN 3372-001:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3372-001
July 2007 ICS 49.060 English Version
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous -Part 001: Technical specification
Série aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes, température d'utilisation - 65 °C à 175 °C ou 200 ° C continu - Partie 001 : Spécification technique
Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Bajonettkupplung, Betriebstemperatur - 65 °C bis 175 °C oder 200 °C konstant - Teil 001: Technische Lieferbedingungen This European Standard was approved by CEN on 24 June 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3372-001:2007: ESIST EN 3372-001:2009

1) Published as an ASD Prestandard on the publication date of this standard 2) Published by: Department of Defense (DOD), the Pentagon, Washington, DC 20301, USA. SIST EN 3372-001:2009

2) See page 4. 3) Published by: Society of Automotive Engineers, Inc. (SAE), 400 Commonwealth Drive, Warrendale, PA 15096-0001, USA. SIST EN 3372-001:2009

with socket contact with pin contact a 4 keyways
Keyways with minimum dimension shall be sharp edged. If the smallest dimension is exceeded the corresponding ap-propriate radii are permissible (0,25 mm max). b Point at which a square ended gauge pin with the same diameter as the mating contact first engages with female con-tact tines. Figure 1 — Receptacles SIST EN 3372-001:2009

9,19 14,3
10,31
7,37 12,04 10 12,45 17,27 13,57 10,52 15,02 12 15,42 21,82 17,35 13,49 19,08 14 18,59 24,99 20,53 16,66 22,26 16 21,77 28,14 23,70 19,83 25,43 18 24,43 31,32 26,24 22,10 28,61 20 27,61 34,49 29,42 25,27 31,78 22 30,78 37,67 32,59 28,45 34,96 1,98
24 33,96 40,89 35,77 31,62 38,13 3,18 2,77
Dimensions in millimetresDimensions in millimetres
Figure 2 — Detail of socket entry Figure 3 — Detail of pin barrier
Table 2 — Detail dimensions Dimensions in millimetresD7 D8 Tol d9 Contact size 0,20+
0,050,05+− 22 1,75 0,89 1,65 20 2,31 1,24 2,21 16 2,90 1,8
2,79 12 3,71 2,61 + 0,08 3,61
8 6.90 5,77 + 0,07 6,76
6.3 Plug mating dimensions The mating dimensions of plugs are shown in Figure 4 and Table 3. SIST EN 3372-001:2009

Key 1 Grounding spring a Plug with grounding spring (shown without coupling ring). b Point at which a square ended gauge pin with the same diameter as the mating contact first engages with female con-tact tines. c Distance from shoulder of connector to locking point. d Keys with maximum dimension shall be sharp-edged. If the maximum dimensions are not achieved appropriate radii are permissible. (0,25 mm max.). Figure 4 — Plugs
Dimensions in millimetres
View of coupling ring Hole (configuration optional) for visual inspection of coupling ring. Tolerances on distances between holes 0,25 mm Figure 4 (concluded) Table 3 — Plugs dimensions Dimensions in millimetres b1 d10 d11 d12 d13 d14 d15 d16 l2 Housing size 0,40,04+− min. 0,30,03+− min. 0,130,03+− 0,130,25+− 0,130,25+− max. 10+
8 7,44
9,07 8,56 12,22 10,21 14,63 16,0 10 10,56 12,32 11,81 15,29 13,46 17,7 19,1 12 13,54 15,16 14,15 19,33 17,25 22,12 23,5 14 16,71 18,34 17,83 22,48 20,42 25,27 26,7 16 19,88 21,51 21,0 25,65 23,6
28,45 29,8 18 22,42 24,05 23,55 28,85 26,14 31,62 33,1 20 25,6 27,23 26,72 32,00 29,31 34,8 36,5 22 2,29 28,77 30,40 29,9 35,18 32,49 37,97 39,6 2,36 24 3,48 31,95 33,58 33,07 38,35 35,66 41,25 42,9 3,35
Receptacle Plug Figure 5 — Polarisation Table 4 — Polarisation index Angular position in degrees Housing size Polarisation index α N
95 A
77 B Not available C Not available
8 D 113 N
95 A
81 B
67 C 123 10 D 109 N
95 A
75 B
63 C 127 12 D 115 N
95 A
74 B
61 C 129 14 D 116
N
95 16 A
77 18 B
65 20 C 125
D 113
N
95 22 A
80 24 B
C 121
D 110 SIST EN 3372-001:2009
Key 1 Sealing surface a The peak of a tooth shall be ± 2° from the vertical centre line of the connector. Figure 6 — Rear accessory interface Table 5 — Rear accessory interface All classes Flat
d1 d2 d3 l1 mm mm Mm mm Shell size UNEF threadClass 2Aa min. 0,030,13+− max. Number of teeth + 0,5
8 0,4375 -28 10,59
9,70
8,82 12 10 0,5625 -24 13,67 12,67 12,07 16 12 0,6875 -24 16,84 15,85 14,96 20 14 0,8125 -20 19,99 18,72 18,14 24 16 0,9375 -20 23,16 21,89 21,31 28 18 1,0625 -18 26,16 24,89 24,01 32 20 1,1875 -18 29,31 28,04 27,18 36 22 1,3152 -18 32,48 31,22 30,36 40 24 1,4375 -18 35,66 35,66 33,53 44 2,54 a Flattened thread for connector according to ISO 263.
 centre of the end of each male contact:
Arrangements comprising contacts grounded to the shell (identified by the letter G) are not applicable to plugs. The service ratings applicable to individual inserts are detailed in the following Figure 7 to Figure 46 inclusive. The voltage details can be found in Table 7 — Voltage proof test to EN 2591-207.
Contact X mm Y mm
Contact X mm Y mm
1 + 1,14 + 1,98
A + 1,65 + 0,97
2 + 1,98 – 1,14
B
0 – 2,01
0 – 2,29
C – 1,65 + 0,97
4 – 1,98 – 1,14
5 – 1,14 + 1,98
Figure 7 Figure 8 Figure 9
10N35 Rating M 13 contacts, size 22 10N98 Rating I 6 contacts, size 20
Contact X mm Y mm
Contact X mm Y mm
0 + 3,71
A
0 + 3,30
2 + 2,16 + 3,00
B + 3,30
3 + 3,51 + 1,14
C + 1,65 – 2,87
4 + 3,51 – 1,14
D – 1,65 – 2,87
5 + 2,16 – 3,00
E – 3,30
0 – 3,71
F
7 – 2,16 – 3,00
8 – 3,51 – 1,14
9 – 3,51 + 1,14
10 – 2,16 + 3,00
0 + 1,42
12 + 1,24 + 0,89
13 – 1,24 – 0,89
Figure 10 Figure 11
Contact X mm Y mm
Contact X mm Y mm Contact X mm Y mm
A
0 + 3,81
1 + 1,14 + 5,00 12 – 4,62 + 2,24
B + 3,71 + 0,89
2 + 3,20 + 4,01 13 – 3,20 + 4,01
C
0 – 2,11
3 + 4,62 + 2,24 14 – 1,14 + 5,00
D – 3,71 + 0,89
4 + 5,16
0 15 + 1,14 + 2,72
5 + 4,62 – 2,24 16 + 2,97 + 0,66
6 + 3,20 – 4,01 17 + 2,36 – 1,91
7 + 1,14 – 5,00 18
0 – 3,05
8 – 1,14 – 5,00 19 – 2,36 – 1,91
9 – 3,20 – 4,01 20 – 2,97 + 0,66
10 – 4,62 – 2,24 21 – 1,14 + 2,72
11 – 5,16
0 22
0 – 0,76
Figure 12 Figure 13 12N98 Rating I 10 contacts, size 20 14N05 and 14G05 Rating II 5 contacts, size 16
Contact X mm Y mm Contact X mm Y mm
Contact X mm Y mm A
0 + 4,95 F – 4,17 – 2,67
A
0 + 2,54 B + 3,18 + 3,81 G – 4,90 + 0,76
B + 4,42 + 0,61 C + 4,90 + 0,76 H – 3,18 + 3,81
C + 2,39 – 3,76 D + 4,17 – 2,67 J + 1,65 – 0,38
D – 2,39 – 3,76 E
0 – 3,43 K – 1,65 – 0,38
E – 4,42 + 0,61
Figure 14 Figure 15
Contact X mm Y mm Contact X mm Y mm Contact X mm Y mm A 0
+ 5,72 H – 3,30 – 5,72 R + 3,30 0
B + 3,30 + 5,72 J – 4,95 – 2,87 S + 1,65 – 2,87 C + 4,95 + 2,87 K – 6,60 0
T – 1,65 – 2,87 D + 6,60 0 L – 4,95 + 2,87 U – 3,30 0
E + 4,95 – 2,87 M – 3,30 + 5,72 V 0
F + 3,30 – 5,72 N – 1,65 + 2,87
G 0
– 5,72 P + 1,65 + 2,87
Figure 16 14N35 Rating M 37 contacts, size 22
Contact X mm Y mm Contact X mm Y Mm Contact X mm Y mm Contact X mm Y mm
1 + 1,14 + 6,65 11 – 3,30 – 5,89 21 + 4,32 + 1,02 31 + 1,14 + 1,88
2 + 3,12 + 5,51 12 – 5,08 – 4,45 22 + 4,32 – 1,27 32 + 2,29 – 0,10
3 + 5,36 + 4,06 13 – 6,27 – 2,49 23 + 3,12 – 3,23 33 + 1,14 – 2,08
4 + 6,45 + 2,03 14 – 6,76 – 0,25 24 + 1,14 – 4,37 34 – 1,14 – 2,08
5 + 6,76 – 0,25 15 – 6,45 + 2,03 25 – 1,14 – 4,37 35 – 2,29 – 0,10
6 + 6,27 – 2,49 16 – 5,36 + 4,06 26 – 3,12 – 3,23 36 – 1,14 + 1,88
7 + 5,08 – 4,45 17 – 3,12 + 5,51 27 – 4,32 – 1,27 37 0
– 0,10
8 + 3,30 – 5,89 18 – 1,14 + 6,65 28 – 4,32 + 1,02
9 + 1,14 – 6,65 19 + 1,14 + 4,37 29 – 3,12 + 3,02
10 – 1,14 – 6,65 20 + 3,12 + 3,02 30 – 1,14 + 4,37
Figure 17 SIST EN 3372-001:2009

Contact X mm Y mm Contact X mm Y mm A + 1,65 + 5,94 G – 5,26 – 2,41 B + 4,52 + 4,52 H – 5,94 + 1,65 C + 5,84 – 0,58 J – 4,52 + 4,52 D + 4,52 – 4,52 K – 1,65 + 5,94 E + 1,65 – 5,94 L – 1,19 + 2,06 F – 2,26 – 5,94 M + 1,19 – 2,06 Figure 18 16N06 and 16G06 Rating I 6 contacts, size 12 16N08 and 16G08 Rating II 8 contacts, size 16
Contact X mm Y mm Contact X mm Y mm
ContactX mm Y mm Contact X mm Y mm A + 3,07 + 5,31 D – 6,12 0
A 0
+ 5,99 E – 2,39 – 5,49 B + 6,12 0
E – 3,07 + 5,31
B + 3,25 + 2,18 F – 5,84 – 1,98 C 0
– 6,12 F 0
C + 5,84 – 1,98 G – 3,25 + 2,18
D + 2,39 – 5,49 H 0
– 1,32
Figure 19 Figure 20
Contact X mm Y mm A 0 + 4,75 B 0 – 4,75
Figure 21 16N26 Rating I 26 contacts, size 22
Contact X mm Y mm Contact X mm Y mm Contact X mm Y mm A
0 + 8,15 K – 4,80 – 6,60 V + 4,53 – 0,91 B + 3,33 + 7,44 L – 7,06 – 4,09 W + 3,02 – 3,84 C + 6,07 + 5,44 M – 8,10 – 0,86 X
0 – 5,16 D + 7,75 + 2,51 N – 7,75 + 2,51 Y – 3,02 – 3,84 E + 8,10 – 0,86 P – 6,07 + 5,44 Z – 4,53 – 0,91 F + 7,06 – 4,09 R – 3,33 + 7,44 a – 4,45 + 2,39 G + 4,80 – 6,60 S – 1,78 + 4,50 b
0 + 1,65 H + 1,70 – 7,98 T + 1,78 + 4,50 c
0 – 1,65 J – 1,70 – 7,98 U + 4,45 + 2,39
Figure 22 SIST EN 3372-001:2009

Contact X mm Y mm Contact X mm Y mm ContactX mm Y mm Contact X mm Y mm
1 – 7,92 + 2,18 15 – 3,96 – 4,67 29 0
– 2,39 43 + 3,96 – 0,10
2 – 7,92 – 0,10 16 – 3,96 – 6,96 30 0
– 4,67 44 + 3,96 – 2,39
3 – 7,92 – 2,39 17 – 2,26 + 8,03 31 0
– 6,96 45 + 3,96 – 4,67
4 – 6,15 + 5,61 18 – 1,98 + 5,61 32 + 2,26 + 8,03 46 + 3,96 – 6,96
5 – 5,94 + 3,33 19 – 1,98 + 3,33 33 + 1,98 + 5,61 47 + 6,15 + 5,61
6 – 5,94 + 1,04 20 – 1,98 + 1,04 34 + 1,98 + 3,33 48 + 5,94 + 3,33
7 – 5,94 – 1,24 21 – 1,98 – 1,24 35 + 1,98 + 1,04 49 + 5,94 + 1,04
8 – 5,94 – 3,53 22 – 1,98 – 3,53 36 + 1,98 – 1,24 50 + 5,94 – 1,24
9 – 5,94 – 5,82 23 – 1,98 – 5,82 37 + 1,98 – 3,53 51 + 5,94 – 3,53 10 – 4,37 + 7,09 24 – 1,98 – 8,10 38 + 1,98 – 5,82 52 + 5,94 – 5,82 11 – 3,96 + 4,47 25 0
+ 8,36 39 + 1,98 – 8,10 53 + 5,94 + 2,18 12 – 3,96 + 2,18 26 0
+ 4,47 40 + 4,37 + 7,09 54 + 7,92 – 0,10 13 – 3,96 – 0,10 27 0
+ 2,18 41 + 3,96 + 4,47 55 + 7,92 – 2,39 14 – 3,96 – 2,39 28 0
– 0,10 42 + 3,96 + 2,18
Figure 23 SIST EN 3372-001:2009

2 contacts, size 16 21 contacts, size 20
Contact X mm Y mm Contact X mm Y mm Contact X mm Y mm A 0
+ 8,15 J – 1,70 – 7,98 T + 1,78 + 4,50 B + 3,33 + 7,44 K – 4,80 – 6,60 U + 4,45 + 2,39 C + 6,07 + 5,44 L – 7,06 – 4,09 V + 3,81 – 1,91 D + 7,75 + 2,51 M – 8,10 – 0,86 W 0
– 4,09 E + 8,10 – 0,86 N – 7,75 + 2,51 X – 3,81 – 1,91 F + 7,06 – 4,09 P – 6,07 + 5,44 Y – 4,45 + 2,39 G + 4,80 – 6,60 R – 3,33 + 7,44 Z 0
+ 0,64 H + 1,70 – 7,98 S – 1,78 + 4,50
Figure 24 18N-03 Rating II 3 contacts, size 08
Contact X mm Y mm A +4,75 +2,75 B 0
-5,50 C -4,75 +2,75
Figure 25 SIST EN 3372-001:2009

Contact X mm Y mm Contact X mm Y mm Contact X mm Y mm A + 2,67 + 6,60 E 0
– 7,14 J – 2,67 + 6,60 B + 6,35 + 3,35 F – 4,55 – 5,46 K 0
+ 2,67 C + 6,99 – 1,35 G – 6,99 – 1,35 L 0
– 2,34 D + 4,55 – 5,46 H – 6,35 + 3,35
Figure 26 SIST EN 3372-001:2009

Contact X mm Y mm Contact X mm Y mm Contact X mm Y mm A + 1,63 + 8,33 E – 4,80 – 6,78 J 0
– 3,18 B + 4,26 + 7,11 F – 4,26 + 7,11 K – 2,08 + 5,13 C + 4,80 – 6,78 G – 1,63 + 8,33 AA – 5,72 + 0,51 D 0
– 8,26 H + 2,08 + 5,13 BB + 5,72 + 0,51
Figure 27 18N17 Rating M 10 contacts, size 22 1 contact, size 20 4 contacts, size 16 2 contacts, size 8
Contact X mm Y mm Contact X mm Y mm Contact X mm Y mm A + 2,52 + 7,64 G – 1,75 – 9,00 N + 4,11 0
B + 6,20 + 6,73 H – 4,60 – 6,25 P + 1,75 + 3,74 C + 5,59 + 0,90 J – 7,87 – 4,52 R 0
– 7,06 D + 7,87 – 4,52 K – 5,59 + 0,90 S – 1,75 – 3,74 E + 4,60 – 6,25 L – 6,20 + 6,73 T 0
– 1,80 F + 1,75 – 9,00 M – 2,52 + 7,64
Figure 28 SIST EN 3372-001:2009

Contact X mm Y mm
Contact X mm Y Mm Contact X mm Y mm A + 1,68 + 8,97
1 – 9,07 + 2,29 34 + 1,14 + 9,14 B + 4,80 + 7,75
2 – 9,07 0
35 + 1,14 + 6,86 C + 7,26 + 5,51
3 – 9,07 + 2,29 36 + 1,14 + 4,57 D + 8,76 + 2,49
4 – 7,09 + 5,72 37 + 1,14 + 2,29 E + 9,07 – 0,84
5 – 7,09 + 3,43 38 + 1,14 0
F + 8,15 – 4,06
6 – 7,09 + 1,14 39 + 1,14 – 2,29 G + 6,15 – 6,73
7 – 7,09 – 1,14 40 + 1,14 – 4,57 H + 3,30 – 8,51
8 – 7,09 – 3,43 41 + 1,14 – 6,86 J 0
– 9,12
9 – 7,09 – 5,72 42 + 1,14 – 9,14 K – 3,30 – 8,51
10 – 5,11 + 6,86 43 + 3,12 + 8,00 L – 6,15 – 6,73
11 – 5,11 + 4,57 44 + 3,12 + 5,72 M – 8,15 – 4,06
12 – 5,11 – 2,29 45 + 3,12 + 3,43 N – 9,07 – 0,84
13 – 5,11 0
46 + 3,12 + 1,14 P – 8,76 + 2,49
14 – 5,11 – 2,29 47 + 3,12 – 1,14 R – 7,26 + 5,51
15 – 5,11 – 4,57 48 + 3,12 – 3,43 S – 4,80 + 7,75
16 – 5,11 – 6,86 49 + 3,12 – 5,72 T – 1,68 + 8,97
17 – 3,12 + 8,00 50 + 3,12 – 8,00 U 0
+ 5,84
18 – 3,12 + 5,72 51 + 5,11 + 6,86 V + 3,15 + 4,90
19 – 3,12 + 3,43 52 + 5,11 + 4,57 W + 5,31 + 2,41
20 – 3,12 + 1,14 53 + 5,11 + 2,29 X + 5,79 – 0,84
21 – 3,12 – 1,14 54 + 5,11 0
Y + 4,42 – 3,84
22 – 3,12 – 3,43 55 + 5,11 – 2,29 Z + 1,65 – 5,61
23 – 3,12 – 5,72 56 + 5,11 – 4,57 a – 1,65 – 5,61
24 – 3,12 – 8,00 57 + 5,11 – 6,86 b – 4,42 – 3,84
25 – 1,14 + 9,14 58 + 7,09 + 5,72 c – 5,79 – 0,84
26 – 1,14 + 6,86 59 + 7,09 + 3,43 d – 5,31 + 2,41
27 – 1,14 + 4,57 60 + 7,09 + 1,14 e – 3,15 + 4,90
28 – 1,14 + 2,29 61 + 7,09 – 1,14 f 0
+ 2,44
29 – 1,14 0
62 + 7,09 – 3,43 g + 2,44 0
30 – 1,14 – 2,29 63 + 7,09 – 5,72 h 0
– 2,44
31 – 1,14 – 4,57 64 + 9,07 + 2,29 j – 2,44 0
32 – 1,14 – 6,86 65 + 9,07 0
33 – 1,14 – 9,14 66 + 9,07 – 2,29
Figure 29 Figure 30
Contact X mm Y mm ContactX mm Y mm
ContactX mm Y mm Contact X mm Y mm A + 3,07 + 8,43 G – 8,84 – 1,55
A + 3,00 + 8,18 J – 8,66 + 0,91 B + 7,77 + 4,50 H – 7,77 + 4,50
B + 6,88 + 5,36 K – 6,88 + 5,36 C + 8,84 – 1,55 J – 3,07 + 8,43
C + 8,66 + 0,91 L – 3,00 + 8,18 D + 5,77 – 6,86 K 0
+ 3,12
D + 7,82 – 3,81 M 0
+ 4,45 E 0
– 8,97 L 0
– 2,92
E + 4,62 – 7,37 N + 3,91 + 1,57 F – 5,77 – 6,86
F 0
– 8,71 P + 2,39 – 3,10
G – 4,62 – 7,37 R – 2,39 – 3,10
H – 7,82 – 3,81 S – 3,91 + 1,57
Figure 31 Figure 32
Contact X Mm Y mm Contact X mm Y mm Contact X mm Y mm
1 + 1,35 + 10,82 28 – 1,35 + 10,82 55 + 6,02 + 1,22
2 + 3,71 + 10,26 29 0 + 8,20 56 + 6,02 – 1,22
3 + 5,89 + 9,19 30 + 2,49 + 8,18 57 + 5,28 – 3,53
4 + 7,77 + 7,67 31 + 4,67 + 7,11 58 + 3,40 – 5,05
5 + 9,27 + 5,77 32 + 6,55 + 5,59 59 + 1,22 – 6,12
6 + 10,31 + 3,58 33 + 7,90 + 3,58 60 – 1,22 – 6,12
7 + 10,85 + 1,22 34 + 8,43 + 1,22 61 – 3,40 – 5,05
8 + 10,85 – 1,22 35 + 8,43 – 1,22 62 – 5,28 – 3,53
9 + 10,31 – 3,58 36 + 7,90 – 3,58 63 – 6,02 – 1,22 10 + 9,27 – 5,77 37 + 6,55 – 5,59 64 – 6,02 + 1,22 11 + 7,77 – 7,67 38 + 4,67 – 7,11 65 – 5,28 + 3,53 12 + 5,89 – 9,19 39 + 2,49 – 8,18 66 – 3,40 + 5,05 13 + 3,71 – 10,26 40 0
– 8,81 67 – 1,22 + 3,71 14 + 1,35 – 10,82 41 – 2,49 – 8,18 68 + 1,22 + 3,71 15 – 1,35 – 10,82 42 – 4,67 – 7,11 69 + 3,18 + 2,29 16 – 3,71 – 10,26 43 – 6,55 – 5,59 70 + 3,94 0
17 – 5,89 – 9,19 44 – 7,90 – 3,58 71 + 3,18 – 2,29 18 – 7,77 – 7,67 45 – 8,43 – 1,22 72 + 1,22 – 3,71 19 – 9,27 – 5,77 46 – 8,43 + 1,22 73 – 1,22 – 3,71 20 – 10,31 – 3,58 47 – 7,90 + 3,58 74 – 3,18 – 2,29 21 – 10,85 – 1,22 48 – 6,55 + 5,59 75 – 3,94 0
22 – 10,85 + 1,22 49 – 4,67 + 7,11 76 – 3,18 + 2,29 23 – 10,31 + 3,58 50 – 2,49 + 8,18 77 0
+ 1,35 24 – 9,27 + 5,77 51 – 1,22 + 6,12 78 + 1,22 – 0,74 25 – 7,77 + 7,67 52 + 1,22 + 6,12 79 – 1,22 – 0,74 26 – 5,89 + 9,19 53 + 3,40 + 5,05
27 – 3,71 + 10,26 54 + 5,28 + 3,53
Figure 33
4 contacts, size 8
Contact X mm Y mm Contact X mm Y mm
Contact X mm Y mm
A 0
+ 10,60 Y + 3,31 + 6,39
A + 4,57 + 4,57
B + 3,28 + 10,09 Z + 5,88 + 4,15
B + 4,57 – 4,57
C + 6,23 + 8,58 a + 7,13 + 0,97
C – 4,57 – 4,57
D + 8,58 + 6,23 b + 6,78 – 2,42
D – 4,57 + 4,57
E + 10,09 + 3,28 c + 4,91 – 5,27
F + 10,60 0
d + 1,93 – 6,94
G + 10,09 – 3,28 e – 1,93 – 6,94
H + 8,58 – 6,23 f – 4,91 – 5,27
J + 6,23 – 8,58 g – 6,78 – 2,42
K + 3,28 – 10,09 h – 7,13 + 0,97
L 0
– 10,60 i – 5,88 + 4,15
M – 3,28 – 10,09 j – 3,31 + 6,39
N – 6,23 – 8,58 k 0
+ 3,81
P – 8,58 – 6,23 m + 2,97 + 2,38
R – 10,09 – 3,28 n + 3,72 – 0,82
S – 10,60 0
p + 1,69 – 3,42
T – 10,09 + 3,28 q – 1,69 – 3,42
U – 8,58 + 6,23 r – 3,72 – 0,82
V – 6,23 + 8,58 s – 2,97 + 2,38
W – 3,28 + 10,09 t 0
X 0
+ 7,20
Figure 34 Figure 35
Contact X mm Y mm Contact X mm Y mm ContactX mm Y mm Contact X mm Y mm A + 3,25 + 9,78 G 0
– 10,31 N – 3,25 + 9,78 V – 5,44 – 0,89 B + 7,34 + 7,24 H – 4,65 – 9,19 P 0
+ 6,22 W – 4,06 + 3,71 C + 9,80 + 3,12 J – 8,33 – 6,07 R + 4,06 + 3,71 X 0
D + 10,16 – 1,65 K – 10,16 – 1,65 S + 5,44 – 0,89
E + 8,33 – 6,07 L – 9,80 + 3,12 T + 2,39 – 4,93
F + 4,65 – 9,19 M – 7,34 + 7,24 U – 2,39 – 4,93
Figure 36 SIST EN 3372-001:2009

Contact X mm Y mm Contact X mm Y mm Contact X mm Y mm
1 – 10,87 + 6,12 35 – 2,11 + 12,07
69 + 4,22 + 6,05
2 – 11,86 + 3,91 36 – 2,11 + 9,65
70 + 4,22 + 3,63
3 – 12,40 + 1,55 37 – 2,11 + 7,24
71 + 4,22 + 1,22
4 – 10,54 0 38 – 2,11 + 4,83
72 + 4,22 – 1,19
5 – 12,40 – 1,55 39 – 2,11 + 2,41
73 + 4,22 – 3,61
6 – 10,87 – 3,61 40 – 2,11 0
74 + 4,22 – 6,02
7 – 10,87 – 6,02 41 – 2,11 – 2,41
75 + 4,22 – 8,43
8 – 8,43 + 8,46 42 – 2,11 – 4,83
76 + 4,22 – 10,85
9 – 8,43 + 6,05 43 – 2,11 – 7,24
77 + 6,32 + 9,65 10 – 8,43 + 3,63 44 – 2,11 – 9,65
78 + 6,32 + 7,24 11 – 8,43 + 1,22 45 – 2,11 – 12,07
79 + 6,32 + 4,83 12 – 8,43 – 1,19 46 0 + 10,87
80 + 6,32 + 2,41 13 – 8,43 – 3,61 47 0 + 8,46
81 + 6,32 0 14 – 8,43 – 6,02 48 0 + 6,05
82 + 6,32 – 2,41 15 – 8,43 – 8,43 49 0 + 3,63
83 + 6,32 – 4,83 16 – 6,32 + 9,65 50 0 + 1,22
84 + 6,32 – 7,24 17 – 6,32 + 7,24 51 0 – 1,19
85 + 6,32 – 9,65 18 – 6,32 + 4,83 52 0 – 3,61
86 + 8,43 + 8,46 19 – 6,32 + 2,41 53 0 – 6,02
87 + 8,43 + 6,05 20 – 6,32 0 54 0 – 8,43
88 + 8,43 + 3,63 21 – 6,32 – 2,41 55 0 – 10,85
89 + 8,43 + 1,22 22 – 6,32 – 4,83 56 + 2,11 + 12,07
90 + 8,43 – 1,19 23 – 6,32 – 7,24 57 + 2,11 + 9,65
91 + 8,43 – 3,61 24 – 6,32 – 9,65 58 + 2,11 + 7,24
92 + 8,43 – 6,02 25 – 4,22 + 10,87 59 + 2,11 + 4,83
93 + 8,43 – 8,43 26 – 4,22 + 8,46 60 + 2,11 + 2,41
94 + 10,87 + 6,12 27 – 4,22 + 6,05 61 + 2,11 0
95 + 11,86 + 3,91 28 – 4,22 + 3,63 62 + 2,11 – 2,41
96 + 12,40 + 1,55 29 – 4,22 + 1,22 63 + 2,11 – 4,83
97 + 10,54 0 30 – 4,22 – 1,19 64 + 2,11 – 7,24
98 + 12,40 – 1,55 31 – 4,22 – 3,61 65 + 2,11 – 9,65
99 + 10,87 – 3,61 32 – 4,22 – 6,02 66 + 2,11 – 12,07 100 + 10,87 – 6,02 33 – 4,22 – 8,43 67 + 4,22 + 10,87
34 – 4,22 – 10,85 68 + 4,22 + 8,46
Figure 37 SIST EN 3372-001:2009

Contact X mm Y mm Contact X mm Y mm A + 2,84 + 11,56 E – 5,72 – 6,60 B + 5,72 + 9,91 F – 8,53 – 4,95 C + 8,53 + 8,26 G – 8,53 – 1,65 D + 11,43 + 3,30 H – 8,53 + 1,65 E + 11,43 0
K – 8,53 + 4,95 F + 11,43 – 3,30 M – 5,72 + 6,60 G + 8,53 – 8,26 N – 2,84 + 8,26 H + 5,72 – 10,41 P 0
+ 6,60 J – 5,72 – 10,41 Q + 2,84 + 4,95 K – 8,53 – 8,26 R + 5,72 + 3,30 L – 11,43 – 3,30 S + 5,72 0
M – 11,43 0
T + 5,72 – 3,30 N – 11,43 + 3,30 U + 2,84 – 4,95 P – 8,53 + 8,26 V 0
– 6,60 R – 5,72 + 9,91 W – 2,84 – 4,95 S – 2,84 + 11,56 X – 5,72 – 3,30 T 0
+ 9,91 Y – 5,72 0
U + 2,84 + 8,26 Z – 5,72 + 3,30 V + 5,72 + 6,60 AA – 2,84 + 4,95 W + 8,53 + 4,95 BB 0
+ 3,30 X + 8,53 + 1,65 CC + 2,84 + 1,65 Y + 8,53 – 1,65 DD + 2,84 – 1,65 Z + 8,53 – 4,95 EE 0
– 3,30 A + 5,72 – 6,60 FF – 2,84 – 1,65 B + 2,84 – 8,26 GG – 2,84 + 1,65 C 0
– 10,41 HH 0
D – 2,84 – 8,26
Figure 38 SIST EN 3372-001:2009

Contact X mm Y mm Contact X mm Y mm Contact X mm Y mm
1 – 12,55 + 6,15 34 – 4,04 – 8,81 67 + 4,60 + 5,72
2 – 13,54 + 3,50 35 – 3,58 – 11,40 68 + 4,37 – 5,66
3 – 13,97 + 0,71 36 – 2,82 – 13,69 69 + 4,04 – 8,81
4 – 13,82 – 2,11 37 – 1,42 + 13,92 70 + 3,58 – 11,40
5 – 13,11 – 4,85 38 – 2,41 + 11,71 71 + 2,82 – 13,09
6 – 11,86 – 7,42 39 – 1,73 + 9,40 72 + 6,78 + 12,22
7 – 11,05 + 8,56 40 – 2,40 + 7,05 73 + 6,83 + 9,80
8 – 10,13 + 6,32 41 – 2,41 + 4,65 74 + 6,27 + 7,47
9 – 11,20 + 4,14 42 – 2,26 – 4,52 75 + 6,04 0
10 – 11,81 + 1,80 43 – 2,39 – 7,03 76 + 6,02 – 7,42 11 – 11,94 – 0,61 44 – 1,75 – 9,55 77 + 5,79 – 10,46 12 – 11,58 – 3,00 45 – 1,22 – 11,89 78 + 5,51 – 12,85 13 – 10,74 – 5,26 46 0
+ 11,96 79 + 9,12 + 10,62 14 – 9,45 – 7,32 47 0
+ 7,70 80 + 8,66 + 8,23 15 – 10,13 – 9,63 48 0
+ 5,28 81 + 7,82 + 5,64 16 – 9,12 + 10,62 49 0
+ 2,64 82 + 7,70 – 5,66 17 – 8,66 + 8,23 50 0
83 + 7,80 – 9,07 18 – 7,82 + 5,64 51 0
– 2,69 84 + 7,98 – 11,48 19 – 7,70 – 5,66 52 0
– 5,38 85 + 11,05 + 8,56 20 – 7,80 – 9,07 53 0 – 7,87 86 + 10,13 + 6,32 21 – 7,98 – 11,48 54 0
– 14,00 87 + 11,20 + 4,14 22 – 6,78 + 12,22 55 + 1,42 + 13,92 88 + 11,81 + 1,80 23 – 6,83 + 9,80 56 + 2,41 + 11,71 89 + 11,94 – 0,61 24 – 6,27 + 7,47 57 + 1,73 + 9,40 90 + 11,58 – 3,00 25 – 6,04 0
58 + 2,40 + 7,06 91 + 10,74 – 5,26 26 – 6,02 – 7,42 59 + 2,41 + 4,65 92 + 9,45 – 7,32 27 – 5,79 – 10,46 60 + 2,26 – 4,52 93 + 10,13 – 9,63 28 – 5,51 – 12,85 61 + 2,39 – 7,03 94 + 12,55 + 6,15 29 – 4,19 + 13,34 62 + 1,75 – 9,55 95 + 13,54 + 3,50 30 – 4,72 + 11,00 63 + 1,22 – 11,89 96 + 13,97 + 0,71 31 – 4,17 + 8,64 64 + 4,19 + 13,34 97 + 13,82 – 2,11 32 – 4,60 + 5,72 65 + 4,72 + 11,00 98 + 13,11 – 4,85 33 – 4,37 – 5,66 66 + 4,17 + 8,64 99 + 11,86 – 7,42
Figure 39 SIST EN 3372-001:2009

4 contacts, size 12
3 contacts, size 8
Contact X mm Y mm
ContactX mm Y Mm Contact X mm Y mm A 0
+ 10,39
A 0
+ 10,34 S – 5,94 + 12,98 B + 5,99 + 10,39
B + 5,94 + 12,98 T + 6,17 + 6,84 C + 8,99 + 5,21
C + 8,94 + 10,44 U + 9,07 + 3,45 D + 11,99 0
D + 11,84 + 6,98 V + 11,43 – 4,65 E + 8,99 – 5,21
E + 13,46 + 2,82 W 0
– 3,33 F + 5,99 – 10,39
F + 13,64 – 1,52 X – 11,43 - 4,65 G 0
– 10,39
G + 11,86 – 7,92 Y – 9,07 + 3,45 H – 5,99 – 10,39
H + 5,28 – 8,97 Z – 6,17 + 6,84 J – 8,99 – 5,21
J 0
– 13,74 1 + 4,95 + 2,92 K – 11,99 0
K – 5,28 – 8,97 2 + 8,05 – 1,55 L – 8,99 + 5,21
L – 11,86 – 7,92 3 – 8,05 – 1,55 M – 5,99 + 10,39
M – 13,64 – 1,52 4 – 4,95 + 2,92 N – 3,00 + 5,21
N – 13,46 + 2,82 5 0
+ 2,51 P + 3,00 + 5,21
P – 11,84 + 6,98 6 + 3,58 – 0,46 R + 5,99 0
R – 8,94 + 10,44 7 – 3,58 – 0,46 S + 3,00 – 5,21
T – 3,00 – 5,21
U – 5,99 0
V 0
Figure 40 Figure 41
Contact X mm Y mm Contact X mm Y mm ContactX mm Y mm ContactX mm Y mm
1 – 12,17 + 7,09 33 – 6,32 – 7,24 65 0
– 1,19
97 + 6,32 + 4,83
2 – 13,21 + 4,83 34 – 6,32 – 9,67 66 0
– 3,61
98 + 6,32 + 2,41
3 – 13,87 + 2,41 35 – 6,32 – 12,0767 0
– 6,02
99 + 6,32 0
4 – 14,10 0
36 – 4,22 + 13,4668 0
– 8,43 100 + 6,32 – 2,41
5 – 13,87 – 2,41 37 – 4,22 + 10,8569 0
– 10,85101 + 6,32 – 4,83
6 – 13,21 – 4,83 38 – 4,22 + 8,43 70 0
– 14,10102 + 6,32 – 7,24
7 – 12,17 – 7,09 39 – 4,22 + 6,02 71 + 2,11 + 12,07103 + 6,32 – 9,67
8 – 10,77 + 9,07 40 – 4,22 + 3,61 72 + 2,11 + 9,67 104 + 6,32 – 12,07
9 – 10,54 + 4,83 41 – 4,22 + 1,19 73 + 2,11 + 7,24 105 + 8,43 + 11,28 10 – 10,54 + 2,41 42 – 4,22 – 1,19 74 + 2,11 + 4,83 106 + 8,43 + 8,43 11 – 10,54 0
43 – 4,22 – 3,61 75 + 2,11 + 2,41 107 + 8,43 + 6,02 12 – 10,54 – 2,41 44 – 4,22 – 6,02 76 + 2,11 0
108 + 8,43 + 3,61 13 – 10,54 – 4,83 45 – 4,22 – 8,43 77 + 2,11 – 2,41 109 + 8,43 + 1,19 14 – 10,77 – 9,07 46 – 4,22 – 10,8578 + 2,11 – 4,83 110 + 8,43 – 1,19 15 – 8,43 + 11,28 47 – 4,22 – 13,2679 + 2,11 – 7,24 111 + 8,43 – 3,61 16 – 8,43 + 8,43 48 – 2,11 + 12,0780 + 2,11 – 9,67 112 + 8,43 – 6,02 17 – 8,43 + 6,02 49 – 2,11 + 9,67 81 + 2,11 – 12,07113 + 8,43 – 8,43 18 – 8,43 + 3,61 50 – 2,11 + 7,24 82 + 4,06 + 13,46114 + 8,43 – 10,85 19 – 8,43 + 1,19 51 – 2,11 + 4,83 83 + 4,22 + 10,85115 + 10,77 + 9,07 20 – 8,43 – 1,19 52 – 2,11 + 2,41 84 + 4,22 + 8,43 116 + 10,54 + 4,83 21 – 8,43 – 3,61 53 – 2,11 0
85 + 4,22 + 6,02 117 + 10,54 + 2,41 22 – 8,43 – 6,02 54 – 2,11 – 2,41 86 + 4,22 + 3,61 118 + 10,54 0
23 – 8,43 – 8,43 55 – 2,11 – 4,83 87 + 4,22 + 1,19 119 + 10,54 – 2,41 24 – 8,43 – 10,85 56 – 2,11 – 7,24 88 + 4,22 – 1,19 120 + 10,54 – 4,83 25 – 6,32 + 12,60 57 – 2,11 – 9,67 89 + 4,22 – 3,61 121 + 10,77 – 9,07 26 – 6,32 + 9,67 58 – 2,11 – 12,0790 + 4,22 – 6,02 122 + 12,71 + 7,09 27 – 6,32 + 7,24 59 0
+ 13,2691 + 4,22 – 8,43 123 + 13,21 + 4,83 28 – 6,32 + 4,83 60 0
+ 10,8592 + 4,22 – 10,85124 + 13,87 + 2,41 29 – 6,32 + 2,41 61 0
+ 8,43 93 + 4,22 – 13,26125 + 14,10 0
30 – 6,32 0
62 0
+ 6,02 94 + 6,32 + 12,60126 + 13,87 – 2,41 31 – 6,32 – 2,41 63 0
+ 3,61 95 + 6,32 + 9,57 127 + 13,21 – 4,83 32 – 6,32 – 4,83 64 0
+ 1,19 96 + 6,32 + 7,24 128 + 12,17 – 7,09
Figure 42 SIST EN 3372-001:2009

3 contacts, size 20 11 contacts, size 16
2 contacts, size 12
3 contacts, size 8
Contact X mm Y mm Contact X mm Y mm
Contact X mm Y mm Contact X mm Y mm A 0
+ 11,96W + 6,15 + 5,99
A 0
10,79 Y – 5,37 – 7,92 B + 4,72 + 11,96X + 8,28 + 2,18
B 7,09 11,34 Z 3,32 5,71 C + 8,46 + 9,67 Y + 8,28 – 2,18
C 10,77 7,92 a 7,95 -0,42 D + 11,20 + 5,99 Z + 6,15 – 5,99
D 12,94 3,39 b 0
– 6,60 E
...