iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 1461:1999

(Main)

Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:1999)

Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:1999)

This standard specifies the general properties of and methods of test for coatings applied by hot dipping in zinc (containing not more than 2 % of other metals) on fabricated iron and steel articles. It does not apply to: a) sheet and wire that are continuously hot dip galvanized; b) tube and pipe that is hot dip galvanized in automatic plants; c) hot dip galvanized products for which specific standards exist and which may include additional requirements or requirements different from those of this European Standard.

Durch Feuerverzinken auf Stahl aufgebrachte Zinküberzüge (Stückverzinken) - Anforderungen und Prüfung (ISO 1461:1999)

Diese Norm legt die allgemeinen Anforderungen an und Prüfungen von Eigenschaften von Überzügen fest, die durch Feuerverzinken (Stückverzinken) auf gefertigte Eisen- und Stahlteile aufgebracht werden (anzuwenden für Zinkschmelzen die nicht mehr als 2 % andere Metalle enthalten). Diese Norm gilt nicht für: a) kontinuierlich feuerverzinktes Band und Draht; b) Rohre, die in automatischen Anlagen feuerverzinkt werden; c) feuerverzinkte Produkte, für welche separate Normen existieren. Diese können zusätzliche Anforderungen beinhalten, oder Anforderungen festlegen, die von dieser Norm abweichen.

Revêtements par galvanisation à chaud sur produits finis ferreux - Spécifications et méthodes d'essai (ISO 1461:1999)

La présente norme spécifie les propriétés générales et les méthodes d'essais relatives aux revêtements appliqués par immersion à chaud dans le zinc (ne contenant pas plus de 2 % d'autres métaux) sur des produits finis en fer et en acier. Elles ne s'appliquent pas: - aux tôles et aux fils galvanisés à chaud en continu; b) aux tubes et canalisations galvanisés à chaud dans des usines automatisées; c) aux produits galvanisés à chaud pour lesquels des normes spécifiques existent pouvant inclure des prescriptions supplémentaires ou différentes de celles contenues dans la présente norme européenne.

Prevleke na jeklenih predmetih, nanesene z vročim pocinkanjem - Specifikacije in metode preskušanja (ISO 1461:1999)

General Information

Status
Withdrawn
Publication Date
31-Jan-1999
Withdrawal Date
14-May-2009
ICS
25.220.40 - Metallic coatings
Technical Committee
CEN/TC 262 - Metallic and other inorganic coatings
Drafting Committee
CEN/TC 262/WG 2 - Hot dip galvanized coatings
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-May-2009
Completion Date
15-May-2009
Ref Project
SIST EN ISO 1461:1999 - Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:1999)

Relations

Replaced By
EN ISO 1461:2009 - Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
Effective Date
30-May-2009

Buy Standard

EN ISO 1461:1999EN ISO 1461:1999
PreviousNext
Standard
EN ISO 1461:1999
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1461:1999
01-oktober-1999
3UHYOHNHQDMHNOHQLKSUHGPHWLKQDQHVHQH]YURþLPSRFLQNDQMHP6SHFLILNDFLMHLQ
PHWRGHSUHVNXãDQMD ,62
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test
methods (ISO 1461:1999)
Durch Feuerverzinken auf Stahl aufgebrachte Zinküberzüge (Stückverzinken) -
Anforderungen und Prüfung (ISO 1461:1999)
Revetements par galvanisation a chaud sur produits finis ferreux - Spécifications et
méthodes d'essai (ISO 1461:1999)
Ta slovenski standard je istoveten z: EN ISO 1461:1999
ICS:
25.220.40 Kovinske prevleke Metallic coatings
SIST EN ISO 1461:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1461:1999

---------------------- Page: 2 ----------------------

SIST EN ISO 1461:1999

---------------------- Page: 3 ----------------------

SIST EN ISO 1461:1999

---------------------- Page: 4 ----------------------

SIST EN ISO 1461:1999

---------------------- Page: 5 ----------------------

SIST EN ISO 1461:1999

----------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 14571:2022(Main)
Metallic coatings on non-metallic basis materials - Measurement of coating thickness - Micro-resistivity method (ISO 14571:2020)
SIST EN ISO 14571:2023

This document specifies a method for non-destructive measurements of the thickness of conductive coatings on non-conductive base materials. This method is based on the principle of the sheet resistivity measurement and is applicable to any conductive coatings and layers of metal and semiconductor materials. In general, the probe has to be adjusted to the conductivity and the thickness of the respective application. However, this document focuses on metallic coatings on non-conductive base materials (e.g. copper on plastic substrates, printed circuit boards).
This method is also applicable to thickness measurements of conductive coatings on conductive base materials, if the resistivity of the coating and the base material is significantly different. However, this case is not considered in this document.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16866:2022(Main)
Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) (ISO 16866:2020)
SIST EN ISO 16866:2023

This document specifies a method for measuring the thickness of the individual nickel layers in electroplated multilayer nickel coatings and measuring the potential differences between the individual nickel layers in electroplated multilayer nickel coatings.
The measurement of coatings or layer systems other than electroplated multilayer nickel coatings is outside the scope of this document.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 1461:2022(Main)
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2022)
SIST EN ISO 1461:2022

This document specifies the general properties of hot dip galvanized coatings and test methods for hot dip galvanized coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals). This document does not apply to the following:
a) sheet, wire and woven or welded mesh products that are continuously hot dip galvanized;
b) tube and pipe that are hot dip galvanized in automatic plants;
c) hot dip galvanized products (e.g. fasteners) for which specific standards exist and which can include additional requirements or requirements which are different from those of this document.
NOTE      Individual product standards can incorporate this document for the galvanized coating by quoting its number, or can incorporate it with modifications specific to the product. Different requirements can also be made for galvanized coatings on products intended to meet specific regulatory requirements.
This document does not apply to after-treatment or additional coating of hot dip galvanized articles.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2080:2022(Main)
Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2022)
SIST EN ISO 2080:2022

This document defines the terms related to the general types of surface-finishing processes. Emphasis is placed on practical usage in surface-finishing technology in the metal-finishing field.
This document does not include terms for porcelain and vitreous enamel, thermally sprayed coatings and galvanising for which specialized vocabularies and glossaries exist. For the most part, basic terms that have the same meaning in surface finishing as in other fields of technology, and that are defined in handbooks and dictionaries of chemistry and physics, are not included.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9220:2022(Main)
Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)
SIST EN ISO 9220:2022

This document specifies a destructive method for the measurement of the local thickness of metallic and other inorganic coatings by examination of cross-sections with a scanning electron microscope (SEM). The method is applicable for thicknesses up to several millimetres, but for such thick coatings it is usually more practical to use a light microscope (see ISO 1463). The lower thickness limit depends on the achieved measurement uncertainty (see Clause 10).
NOTE       The method can also be used for organic layers when they are neither damaged by the preparation of the cross-section nor by the electron beam during imaging.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4524-3:2021(Main)
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity (ISO 4524-3:2021)
SIST EN ISO 4524-3:2022

This document specifies four electrographic tests for assessing the porosity of electrodeposited gold and gold alloy coatings for engineering, and decorative and protective purposes.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 1463:2021(Main)
Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
SIST EN ISO 1463:2021

This document specifies a method for the measurement of the local thickness of metallic coatings, oxide layers, and porcelain or vitreous enamel coatings, by the microscopical examination of cross-sections using an optical microscope.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4518:2021(Main)
Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)
SIST EN ISO 4518:2021

This document specifies a method for the measurement of metal coating thickness by first forming a step between the surface of the coating and the surface of its substrate and then measuring the step height using a profile recording instrument. It covers the instrumentation characteristics and the procedure appropriate to this specific application of profilometric methods.
The method is applicable to the measurement of thicknesses of metal coatings from 0,01 µm to 1 000 µm on flat surfaces and, if appropriate precautions are taken, on cylindrical surfaces. It is highly suitable for the measurement of minute thicknesses but, for thicknesses of less than 0,01 µm, surface flatness and surface smoothness are very critical and, accordingly, the method is not suitable for use down to the lowest level of measurement usual for electronic stylus instruments. The method is suitable for measuring coating thicknesses when preparing coating thickness reference standards.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 1460:2020(Main)
Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:2020)
SIST EN ISO 1460:2020

This document specifies a method of determining the mass per unit area of hot dip galvanized coatings on ferrous materials.
Since an exact knowledge of the area of the surface is essential, this document is mainly applicable to shapes whose areas are easy to determine. If, with heavy samples, the specifications of Clause 7 cannot be met, then the hot dip galvanized coating mass is determined by another method.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21968:2019(Main)
Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)
SIST EN ISO 21968:2019

This document specifies a method for using phase-sensitive eddy-current instruments for non-destructive measurements of the thickness of non-magnetic metallic coatings on metallic and non-metallic basis materials such as:
a)    zinc, cadmium, copper, tin or chromium on steel;
b)    copper or silver on composite materials.
The phase-sensitive method can be applied without thickness errors to smaller surface areas and to stronger surface curvatures than the amplitude-sensitive eddy-current method specified in ISO 2360, and is less affected by the magnetic properties of the basis material. However, the phase-sensitive method is more affected by the electrical properties of the coating materials.
In this document, the term "coating" is used for materials such as, for example, paints and varnishes, electroplated coatings, enamel coatings, plastic coatings, claddings and powder coatings.
This method is particularly applicable to measurements of the thickness of metallic coatings. These coatings can be non-magnetic metallic coatings on non-conductive, conductive or magnetic base materials, but also magnetic coatings on non-conductive or conductive base materials.
The measurement of metallic coatings on metallic basis material works only when the product of conductivity and permeability (σ, μ) of one of the materials is at least a factor of two times the product of conductivity and permeability for the other material. Non-ferromagnetic materials have a relative permeability of one.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day