EN 4652-212:2015

SLOVENSKI STANDARD
01-november-2015
$HURQDYWLND.RQHNWRUMLNRDNVLDOQLUDGLRIUHNYHQþQLGHO7LSYPHVQLN
71&,]YHGED]REMHPQRPDWLFR9WLþQLFDVSUYRNRWQRSULUREQLFR6WDQGDUG]D
SURL]YRG
Aerospace series - Connectors, coaxial, radio frequency - Part 212: Type 2, TNC
interface - Clamp nut assembly version - Square flange receptacle - Product standard
Luft- und Raumfahrt - Hochfrequenz Steckverbinder, koaxial - Teil 212: Typ 2, TNC -
Klemmverbindung - Kabelkuppler mit 4kt-Flansch - Produktnorm
Série aérospatiale - Connecteurs coaxiaux pour radio fréquences - Partie 212: Type 2,
interface TNC - Version à presse étoupe - Embase à collerette carrée - Norme de produit
Ta slovenski standard je istoveten z: EN 4652-212:2015
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4652-212
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2015
EUROPÄISCHE NORM
ICS 49.060
English Version
Aerospace series - Connectors, coaxial, radio frequency -
Part 212: Type 2, TNC interface - Clamp nut assembly
version - Square flange receptacle - Product standard
Série aérospatiale - Connecteurs coaxiaux pour radio Luft- und Raumfahrt - Koaxiale Hochfrequenz-
fréquences - Partie 212: Type 2, interface TNC - Steckverbinder Teil 212: Typ 2, TNC-Schnittstelle -
Version à presse étoupe - Embase à collerette carrée - Anschluss mit Konusringverschraubung - Fester
Norme de produit Steckverbinder mit quadratischem Montageflansch -
Produktnorm
This European Standard was approved by CEN on 7 February 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4652-212:2015 E
worldwide for CEN national Members.

Contents Page
European Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
5 Test methods . 8
6 Qualification . 10
7 Quality assurance . 11
8 Designation . 11
9 Marking . 11
10 Packaging . 11
11 Storage . 11

European Foreword
This document (EN 4652-212:2015) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2016, and conflicting national standards shall
be withdrawn at the latest by March 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such
patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
1 Scope
This European Standard specifies the characteristics of screwed on coupling (TNC interface) coaxial
square flange receptacle − 50 ohms. The cable to connector assembly is a clamp technology.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
1)
EN 2591 , Aerospace series — Elements of electrical and optical connection — Test methods
EN 2812, Aerospace series — Stripping of electric cables
EN 4652-001, Aerospace series — Connectors, coaxial, radio frequency — Part 001: Technical specification
EN 4652-210, Aerospace series — Connectors, coaxial, radio frequency — Part 210: Type 2, TNC interface
2)
— Clamp nut assembly version — Straight plug — Product standard
EN 9133, Aerospace series — Quality management systems — Qualification procedure for aerospace
standard parts
3)
TR 6058, Aerospace series — Cable code identification list
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 4652-001 apply.
4 Required characteristics
 The connection technology shall comply to required tests described in Clause 5.
 Interface shall comply to EN 4652-001.
 Water ingress resistance is required in mated conditions for all cable groups.
 Water ingress resistance is required in unmated condition for cable group A.

1) All parts quoted in this European Standard.
2) Publis
...