EN 2591-102:1996
(Main)Aerospace series - Elements of electrical and optical connection - Test methods - Part 102: Examination of dimensions and mass
Aerospace series - Elements of electrical and optical connection - Test methods - Part 102: Examination of dimensions and mass
This standard specifies a method for checking the dimensions and mass of elements of electrical and optical connection. It shall be used together with EN 2591. It shall be used together with EN 2591.
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 102: Prüfung der Maße und Masse
Diese Norm legt ein Verfahren zur Nachprüfung der Masse und Masse von elektrischen und optischen Verbindungselementen fest. Sie ist in Verbindungen mit EN 2591 anzuwenden.
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 102: Examen des dimensions et masse
Cette norme spécifie une méthode pour vérifier les dimensions et la masse des organes de connexion électrique et optique. Elle doit être utilisée conjointement avec EN 2591.
Aerospace series - Elements of electrical and optical connection - Test methods - Part 102: Examination of dimensions and mass
General Information
- Status
- Published
- Publication Date
- 20-Feb-1996
- Withdrawal Date
- 30-Aug-1996
- Technical Committee
- ASD-STAN - Aerospace
- Drafting Committee
- ASD-STAN/D 2 - Electrical
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 01-Jun-2017
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
EN 2591-102:1996 is a CEN aerospace standard in the EN 2591 series titled "Aerospace series - Elements of electrical and optical connection - Test methods - Part 102: Examination of dimensions and mass." The document specifies a method for checking the dimensions and mass of electrical and optical connection elements used in aerospace equipment and systems. It is intended to be used together with the general requirements in EN 2591 and is adopted nationally in some countries (e.g., SIST EN 2591-102:2001).
Keywords: EN 2591-102:1996, aerospace connectors, examination of dimensions and mass, CEN standard, elements of electrical and optical connection.
Key Topics
- Scope and purpose: Defines the method for verifying physical dimensions and mass of connector elements used in aerospace applications.
- Applicability: Targets electrical and optical connection elements within aerospace equipment and systems (ICS 49.060).
- Test method focus: Concentrates on measurement and mass-check procedures as part of test methods for connectors.
- Normative references: Designed to be applied in conjunction with the overall EN 2591 series (use with EN 2591).
- Documentation and reporting: Specifies the need for documented inspection results (typical for test-method standards) to demonstrate compliance with dimensional and mass requirements.
Note: EN 2591-102:1996 describes methods rather than design tolerances; specific dimensional limits and acceptance criteria are set by the applicable connector specification or by the companion EN 2591 documents.
Applications
EN 2591-102 is practical for organizations involved in aerospace electrical and optical interconnection components:
- Aerospace manufacturers - for incoming inspection, production control, and assembly verification of connectors and related parts.
- Design engineers - to verify that component geometry meets mating and installation requirements and to support mass budgeting.
- Quality and test laboratories - for standardized measurement procedures during qualification and routine inspection.
- Procurement and suppliers - to ensure delivered parts conform to dimensional and mass specifications called out in contracts.
- Maintenance and overhaul - to check replacement parts and assemblies for dimensional conformity.
Practical benefits include consistent inspection practices, improved interchangeability of connector elements, and clear evidence for acceptance or rejection during procurement and qualification.
Related standards
- EN 2591 (general series) - normative companion that should be used together with Part 102.
- National adoptions (example: SIST EN 2591-102:2001) and other parts of the EN 2591 series covering additional test methods and connector requirements.
Keywords reiterated: aerospace connectors, EN 2591 series, dimensional inspection, mass verification, test methods.
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
NSF-ISR
NSF International Strategic Registrations.
Orion Registrar Inc.
US-based certification body for management systems.
Sponsored listings
Frequently Asked Questions
EN 2591-102:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Elements of electrical and optical connection - Test methods - Part 102: Examination of dimensions and mass". This standard covers: This standard specifies a method for checking the dimensions and mass of elements of electrical and optical connection. It shall be used together with EN 2591. It shall be used together with EN 2591.
This standard specifies a method for checking the dimensions and mass of elements of electrical and optical connection. It shall be used together with EN 2591. It shall be used together with EN 2591.
EN 2591-102:1996 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 2591-102:1996 has the following relationships with other standards: It is inter standard links to EN 3660-005:2023, EN 3155-075:2022, EN 3660-016:2009, EN 3155-024:2006, EN 3155-026:2019, EN 4869-001:2024, EN 3155-027:2019, EN 3155-045:2019, EN 3660-019:2009, EN 3155-032:2009, EN 3155-075:2009, EN 3155-064:2009, EN 3155-063:2009, EN 4531-001:2012, EN 4645-001:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 2591-102:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2001
Aerospace series - Elements of electrical and optical connection - Test methods -
Part 102: Examination of dimensions and mass
Aerospace series - Elements of electrical and optical connection - Test methods - Part
102: Examination of dimensions and mass
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren -
Teil 102: Prüfung der Maße und Masse
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais -
Partie 102: Examen des dimensions et masse
Ta slovenski standard je istoveten z: EN 2591-102:1996
I
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...