EN 10246-8:1999
(Main)Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
This Part of EN 10246 specifies the requirements for automatic ultrasonic shear wave and Lamb wave testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections. The standard specifies acceptance levels and calibration procedures. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter equal to or greater than 10 mm. European Standard EN 10246 "Non-destructive testing of steel tubes" comprises the Parts shown in Annex A.
Zerstörungsfreie Prüfung von Stahlrohren - Teil 8: Automatische Ultraschallprüfung der Schweißnaht elektrisch geschweißter Stahlrohre zum Nachweis von Längsfehlern
Dieser Teil der EN 10246 legt die Anforderungen an die Ultraschallprüfung der Schweißnaht elektrisch geschweißter Stahlrohre unter Anwendung von Transversalwellen und Plattenwellen zum Nachweis von Längsfehlern fest. Die Norm enthält Festlegungen über Zulässigkeitsklassen und die Einstellung der Prüfanlagen. Dieser Teil der EN 10246 ist anwendbar für die Prüfung von Rohren mit einem Außendurchmesser ab 10 mm. Die Europäische Norm EN 10246 "Zerstörungsfreie Prüfung von Stahlrohren" besteht aus den in Anhang A angegebenen Teilen.
Essais non destructifs des tubes en acier - Partie 8: Contrôle automatique par ultrasons du cordon de soudure pour la détection des imperfections longitudinales des tubes en acier soudés électriquement
La présente partie de l'EN 10246 spécifie les prescriptions relatives au contrôle automatique par ultrasons, avec ondes de cisaillement et ondes de Lamb, du cordon de soudure des tubes soudés par résistance électrique pour la détection des imperfections longitudinales. Elle s'applique au contrôle de tubes dont le diamètre extérieur est égal ou supérieur à 10 mm. Les parties de la norme européenne EN 10246 "Essais non destructifs des tubes en acier" sont données en annexe A.
Neporušitveno preskušanje jeklenih cevi - 8. del: Ugotavljanje vzdolžnih napak vara električno varjenih jeklenih cevi z avtomatsko ultrazvočno preiskavo
General Information
- Status
- Withdrawn
- Publication Date
- 16-Nov-1999
- Withdrawal Date
- 31-Mar-2011
- Technical Committee
- ECISS/TC 110 - Steel tubes, and iron and steel fittings
- Drafting Committee
- ECISS/TC 29/SC 10 - Non-destructive testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Apr-2011
- Completion Date
- 01-Apr-2011
Relations
- Effective Date
- 09-Apr-2011
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 10246-8:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections". This standard covers: This Part of EN 10246 specifies the requirements for automatic ultrasonic shear wave and Lamb wave testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections. The standard specifies acceptance levels and calibration procedures. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter equal to or greater than 10 mm. European Standard EN 10246 "Non-destructive testing of steel tubes" comprises the Parts shown in Annex A.
This Part of EN 10246 specifies the requirements for automatic ultrasonic shear wave and Lamb wave testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections. The standard specifies acceptance levels and calibration procedures. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter equal to or greater than 10 mm. European Standard EN 10246 "Non-destructive testing of steel tubes" comprises the Parts shown in Annex A.
EN 10246-8:1999 is classified under the following ICS (International Classification for Standards) categories: 23.040.10 - Iron and steel pipes; 25.160.40 - Welded joints and welds; 77.040.20 - Non-destructive testing of metals. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10246-8:1999 has the following relationships with other standards: It is inter standard links to EN ISO 10893-11:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10246-8:1999 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/005, M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10246-8:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UHLVNDYRZerstörungsfreie Prüfung von Stahlrohren - Teil 8: Automatische Ultraschallprüfung der Schweißnaht elektrisch geschweißter Stahlrohre zum Nachweis von LängsfehlernEssais non destructifs des tubes en acier - Partie 8: Contrôle automatique par ultrasons du cordon de soudure pour la détection des imperfections longitudinales des tubes en acier soudés électriquementNon-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes fo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...