ENV 13419-2:1999
(Main)Building products - Determination of the emission of volatile organic compounds - Part 2: Emission test cell method
Building products - Determination of the emission of volatile organic compounds - Part 2: Emission test cell method
This standard specifies a general laboratory test method for determination of area specific emission rate of volatile organic compounds (VOCs) from newly produced building products under defined climate conditions. This method can also, in principle, be applied to aged products. The emission data obtained can be used to calculate concentrations in a model room. According to the definition of an emission test cell, it is also possible to perform non-destructive emission measurements on building products on-site in buildings. However, the procedure for such measurements is not described in this standard.
Bauprodukte - Bestimmung der Emission von flüchtigen organischen Verbindungen - Teil 2: Emissionprüfzellen- Verfahren
Diese Vornorm legt ein allgemeines Laborpru(fverfahren zur Bestimmung der fla(chenspezifischen Emissionsrate von flu(chtigen organischen Verbindungen (VOCs) fest aus produktionsneuen Bauprodukten unter definierten klimatischen Bedingungen. Grundsa(tzlich kann des Verfahren jedoch auch bei a(lteren Produkten angewendet werden. Die ermittelten Emissionsdaten ko(nnen zur Konzentrationsberechnung in einem Modellraum genutzt werden.
Produits de construction - Détermination des émissions de composés organiques volatils - Partie 2: Méthode de la cellule d'essai d'émission
La présente prénorme spécifie une méthode générale d'essai en laboratoire permettant de déterminer le taux d'émission spécifique par unité de surface, de composés organiques volatils (COV) provenant des produits de construction nouvellement fabriqués, dans des conditions d'environnement définies. La méthode peut être également appliquée, en principe, aux produits qui ont vieilli. Les données obtenues sur les émissions de COV peuvent être utilisées pour calculer les concentrations dans une pièce modèle.
Gradbeni proizvodi - Določevanje emisije hlapnih organskih snovi - 2. del: Emisija, metoda s preskusno celico
General Information
- Status
- Withdrawn
- Publication Date
- 17-Aug-1999
- Withdrawal Date
- 31-Jan-2006
- Technical Committee
- CEN/TC 264 - Air quality
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Feb-2006
- Completion Date
- 01-Feb-2006
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
NSF International
Global independent organization facilitating standards development and certification.
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.
Kiwa BDA Testing
Building and construction product certification.
Sponsored listings
Frequently Asked Questions
ENV 13419-2:1999 is a standardization document published by the European Committee for Standardization (CEN). Its full title is "Building products - Determination of the emission of volatile organic compounds - Part 2: Emission test cell method". This standard covers: This standard specifies a general laboratory test method for determination of area specific emission rate of volatile organic compounds (VOCs) from newly produced building products under defined climate conditions. This method can also, in principle, be applied to aged products. The emission data obtained can be used to calculate concentrations in a model room. According to the definition of an emission test cell, it is also possible to perform non-destructive emission measurements on building products on-site in buildings. However, the procedure for such measurements is not described in this standard.
This standard specifies a general laboratory test method for determination of area specific emission rate of volatile organic compounds (VOCs) from newly produced building products under defined climate conditions. This method can also, in principle, be applied to aged products. The emission data obtained can be used to calculate concentrations in a model room. According to the definition of an emission test cell, it is also possible to perform non-destructive emission measurements on building products on-site in buildings. However, the procedure for such measurements is not described in this standard.
ENV 13419-2:1999 is classified under the following ICS (International Classification for Standards) categories: 13.040.99 - Other standards related to air quality. The ICS classification helps identify the subject area and facilitates finding related standards.
ENV 13419-2:1999 has the following relationships with other standards: It is inter standard links to EN ISO 16000-10:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ENV 13419-2:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2000
*UDGEHQLSURL]YRGL'RORþHYDQMHHPLVLMHKODSQLKRUJDQVNLKVQRYLGHO (PLVLMD
PHWRGDVSUHVNXVQRFHOLFR
Building products - Determination of the emission of volatile organic compounds - Part 2:
Emission test cell method
Bauprodukte - Bestimmung der Emission von flüchtigen organischen Verbindungen - Teil
2: Emissionprüfzellen- Verfahren
Produits de construction - Détermination des émissions de composés organiques volatils
- Partie 2: Méthode de la cellule d'essai d'émission
Ta slovenski standard je istoveten z: ENV 13419-2:1999
ICS:
13.040.99 Drugi standardi v zvezi s Other standards related to air
kakovostjo zraka quality
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Pag
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...