EN ISO 14744-1:2000
(Main)Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2000)
Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2000)
The main purpose of this standard is to provide requirements for acceptance inspection of electron beam welding machines preferably when first installed on the user's premises. This standard can (in full or in part) be referred to in contracts for supply of electron beam welding machines. Further tests are normally not required if proof of satisfactory welding results is provided in the form of routine inspection documentation. However, the requirements of the standard can also be used for inspection as part of maintenance, if required by contract.
Schweißen - Abnahmeprüfung von Elektronenstrahl-Schweißmaschinen - Teil 1: Grundlagen und Abnahmebedingungen (ISO 14744-1:2000)
Der Hauptzweck dieser Norm ist das Zusammenstellen von Anforderungen für die Abnahmeprüfung von Elektronenstrahl-Schweißmaschinen, vorzugsweise nach der Erstinstallation beim Anwender. Diese Norm kann (vollständig oder teilweise) Grundlage technischer Lieferbedingungen für Elektronstrahl-Schweißmaschinen sein. Soweit durch laufende Prüfberichte zufriedenstellende Schweißergebnisse bestätigt werden, sind weitere Prüfungen normalerweise nicht erforderlich. Im Rahmen von Instandhaltungsarbeiten können jedoch die Anforderungen dieser Norm als Prüfungen vereinbart werden.
Soudage - Essais de réception des machines de soudage par faisceau d'électrons - Partie 1: Principes et conditions de réception (ISO 14744-1:2000)
L'objet principal de la présente norme européenne est de définir des prescriptions pour les essais de réception des machines de soudage par faisceau d'électrons, de préférence lorsqu'elles sont installées pour la première fois dans les locaux de l'utilisateur. Il peut être fait référence à la présente norme européenne (dans sa totalité ou en partie) dans les contrats pour la fourniture de machines de soudage par faisceau d'électrons. Normalement, aucun autre essai n'est prescrit si la preuve que les résultats obtenus lors du soudage sont satisfaisants peut être apportée par des documents de contrôle de routine.
Varjenje - Prevzemni preskusi strojev za varjenje z elektronskim snopom - 1. del: Osnovni pojmi in prevzemni pogoji (ISO 14744-1:2000)
General Information
- Status
- Withdrawn
- Publication Date
- 14-Apr-2000
- Withdrawal Date
- 06-May-2008
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/SC 4 - Quality management in the field of welding
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 07-May-2008
- Completion Date
- 07-May-2008
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN ISO 14744-1:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2000)". This standard covers: The main purpose of this standard is to provide requirements for acceptance inspection of electron beam welding machines preferably when first installed on the user's premises. This standard can (in full or in part) be referred to in contracts for supply of electron beam welding machines. Further tests are normally not required if proof of satisfactory welding results is provided in the form of routine inspection documentation. However, the requirements of the standard can also be used for inspection as part of maintenance, if required by contract.
The main purpose of this standard is to provide requirements for acceptance inspection of electron beam welding machines preferably when first installed on the user's premises. This standard can (in full or in part) be referred to in contracts for supply of electron beam welding machines. Further tests are normally not required if proof of satisfactory welding results is provided in the form of routine inspection documentation. However, the requirements of the standard can also be used for inspection as part of maintenance, if required by contract.
EN ISO 14744-1:2000 is classified under the following ICS (International Classification for Standards) categories: 25.160 - Welding, brazing and soldering. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 14744-1:2000 has the following relationships with other standards: It is inter standard links to EN ISO 14744-1:2008, EN 1011-7:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 14744-1:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2001
Varjenje - Prevzemni preskusi strojev za varjenje z elektronskim snopom - 1. del:
Osnovni pojmi in prevzemni pogoji (ISO 14744-1:2000)
Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles
and acceptance conditions (ISO 14744-1:2000)
Schweißen - Abnahmeprüfung von Elektronenstrahl-Schweißmaschinen - Teil 1:
Grundlagen und Abnahmebedingungen (ISO 14744-1:2000)
Soudage - Essais de réception des machines de soudage par faisceau d'électrons -
Partie 1: Principes et conditions de réception (ISO 14744-1:2000)
Ta slovenski standard je istoveten z: EN ISO 14744-1:2000
ICS:
25.160.30 Varilna oprema Welding equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN ISO 14744
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...