EN ISO 26082-2:2012
(Main)Leather - Physical and mechanical test methods for the determination of soiling - Part 2: Tumbling method (ISO 26082-2:2012)
Leather - Physical and mechanical test methods for the determination of soiling - Part 2: Tumbling method (ISO 26082-2:2012)
ISO 26082-2:2011 specifies a tumbling method which is intended to determine the resistance of all forms of leather to visible soiling through repeated contact with soiled objects. It provides a physical pretreatment routine for leathers that may be vulnerable to loss of soiling resistance in service.
Leder - Physikalische und mechanische Prüfungverfahren zur Bestimmung des Anschmutzens - Teil 2: Trommelverfahren (ISO 26082-2:2012)
Dieser Teil der ISO 26082 beschreibt das Trommelverfahren zur Bestimmung der Beständigkeit aller Leder gegen sichtbares Anschmutzen durch wiederholten Kontakt mit angeschmutzten Gegenständen. Es enthält die Möglichkeit der physikalischen Vorbehandlung für Leder, die ihre Anschmutzbeständigkeit bei Gebrauch verlieren können.
Cuir - Méthodes d'essai physique et mécanique de détermination de la salissure - Partie 2: Méthode par culbutage (ISO 26082-2:2012)
L'ISO 26082-2:2012 spécifie une méthode par culbutage destinée à déterminer la résistance à la salissure visible de toute forme de cuir par mise en contact répétée avec des objets souillés. Elle prévoit un prétraitement physique pour les cuirs susceptibles de perdre leur résistance à la salissure en cours d'utilisation.
Usnje - Fizikalno in mehansko preskušanje za ugotavljanje madežev - 2. del: Metoda z udarjanjem (ISO 26082-2:2012)
Ta del standarda ISO 26082 določa metodo z udarjanjem za ugotavljanje odpornosti vseh oblik usnja proti vidnim madežem s ponavljanjem stika z umazanimi predmeti. Opredeljuje postopek fizične predhodne obdelave usnja, ki bi lahko med uporabo izgubilo odpornost proti madežem.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 26082-2:2012
01-september-2012
Usnje - Fizikalno in mehansko preskušanje za ugotavljanje madežev - 2. del:
Metoda z udarjanjem (ISO 26082-2:2012)
Leather - Physical and mechanical test methods for the determination of soiling - Part 2:
Tumbling method (ISO 26082-2:2012)
Leder - Physikalische und mechanische Prüfungverfahren zur Bestimmung des
Anschmutzens - Teil 2: Trommelverfahren (ISO 26082-2:2012)
Cuir - Méthodes d'essai physique et mécanique de détermination de la salissure - Partie
2: Méthode par culbutage (ISO 26082-2:2012)
Ta slovenski standard je istoveten z: EN ISO 26082-2:2012
ICS:
59.140.30 Usnje in krzno Leather and furs
SIST EN ISO 26082-2:2012 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 26082-2:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 26082-2:2012
EUROPEAN STANDARD
EN ISO 26082-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2012
ICS 59.140.30
English Version
Leather - Physical and mechanical test methods for the
determination of soiling - Part 2: Tumbling method (ISO 26082-
2:2012)
Cuir - Méthodes d'essai physique et mécanique de Leder - Physikalische und mechanische Prüfungverfahren
détermination de la salissure - Partie 2: Méthode par zur Bestimmung des Anschmutzens - Teil 2:
culbutage (ISO 26082-2:2012) Trommelverfahren (ISO 26082-2:2012)
This European Standard was approved by CEN on 9 June 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 26082-2:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 26082-2:2012
EN ISO 26082-2:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 26082-2:2012
EN ISO 26082-2:2012 (E)
Foreword
This document (EN ISO 26082-2:2012) has been prepared by Technical Committee CEN/TC 289 “Leather",
the secretariat of which is held by UNI, in collaboration with IULTCS "International Union of Leather
Technologists and Chemists Societies".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at
the latest by January 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 26082-2:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 26082-2:2012
INTERNATIONAL ISO
STANDARD 26082-2
IULTCS/IUP
53-2
First edition
2012-07-01
Leather — Physical and mechanical test
methods for the determination of
soiling —
Part 2:
Tumbling method
Cuir — Méthodes d'essa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.