EN ISO 17422:2019
(Main)Plastics - Environmental aspects - General guidelines for their inclusion in standards (ISO 17422:2018)
Plastics - Environmental aspects - General guidelines for their inclusion in standards (ISO 17422:2018)
This document provides a structure for inclusion of environmental aspects in standards for plastics products. It proposes an approach which is directed at minimizing any adverse environmental impact without detracting from the primary purpose of ensuring adequate fitness for use of the products under consideration.
The guidance provided by this document is intended primarily for use by standards writers. Over and above its primary purpose, however, this document provides guidance of value to those involved in design work and other activities where environmental aspects of plastics are being considered.
NOTE This document is intended to promote the following practices:
a) the use of techniques for identifying and assessing the environmental impact of technical provisions in standards, and for minimizing their adverse effects;
b) the adoption of good practices such as:
1) procedures for pollution avoidance, e.g. through end-of-life options and its proper management;
2) material and energy conservation in the light of the intended use (and foreseeable misuse) of the product;
3) safe use of hazardous substances;
4) avoidance of technically unjustifiable restrictive practices;
5) promotion of performance criteria rather than exclusion clauses such as are based, for example, only on chemical composition criteria;
6) use of renewable resources and minimization of the use of non-renewable resources, if the life cycle assessment shows favourable;
c) the adoption of a balanced approach in standards development to issues such as environmental impact, product function and performance, health and safety, and other regulatory requirements;
d) the regular review and revision of existing standards in the light of technical innovations, permitting improvement in the environmental impact of products and processes;
e) the application of life cycle analytical approaches wherever applicable and technically justifiable.
Kunststoffe - Umweltaspekte - Allgemeine Richtlinien für die Aufnahme in Normen (ISO 17422:2018)
Dieses Dokument bietet eine Struktur für die Einbeziehung von Umweltaspekten in Normen für Kunststoff-produkte. Es schlägt einen Ansatz vor, der darauf abzielt, schädliche Umweltauswirkungen zu minimieren, ohne den Hauptzweck der Sicherstellung einer angemessenen Gebrauchstauglichkeit der betreffenden Produkte zu beeinträchtigen.
Die Anleitung in diesem Dokument ist hauptsächlich für die Verwendung durch Normenersteller vorgesehen. Zusätzlich zu seinem Hauptzweck gibt dieses Dokument eine wertvolle Anleitung für Personen, die an der Gestaltungsarbeit und anderen Aktivitäten, bei denen Umweltaspekte von Kunststoffen betrachtet werden, beteiligt sind.
ANMERKUNG Es ist vorgesehen, dass dieses Dokument die folgenden Vorgehensweisen fördert:
a) den Einsatz von Techniken zur Identifizierung und Bewertung der Umweltauswirkungen von tech¬nischen Vorkehrungen in Normen und zur Minimierung ihrer nachteiligen Auswirkungen;
b) die Einführung bewährter Verfahren wie:
1) Verfahren zur Vermeidung von Umweltverschmutzungen, z. B. durch Lebensende Optionen und deren richtiges Management;
2) Material- und Energieeinsparung im Hinblick auf die beabsichtigte Verwendung (und den vorhersehbaren Missbrauch) des Produkts;
3) sichere Verwendung gefährlicher Stoffe;
4) Vermeidung technisch ungerechtfertigter wettbewerbsbeschränkender Praktiken;
5) Förderung von Leistungskriterien anstelle von Ausschlussklauseln, die beispielsweise nur auf Kriterien der chemischen Zusammensetzung basieren;
6) Einsatz erneuerbarer Ressourcen und Minimierung des Einsatzes nicht erneuerbarer Ressourcen, wenn die Ökobilanz positiv ausfällt.
c) die Verfolgung eines ausgewogenen Ansatzes bei der Normenentwicklung in Fragen wie Umweltauswirkungen, Produktfunktion und -leistung, Gesundheit und Sicherheit sowie andere regulatorische Anforderungen;
d) die regelmäßige Überprüfung und Überarbeitung bestehender Normen im Hinblick auf technische Innovationen, die eine Verbesserung der Umweltauswirkungen von Produkten und Prozessen ermöglichen;
e) die Anwendung von lebenszyklusanalytischen Ansätzen, wo immer dies möglich und technisch vertretbar ist.
Matières plastiques - Aspects liés à l'environnement - Lignes directrices générales pour leur prise en compte dans les normes (ISO 17422:2018)
Le présent document définit une structure pour l'inclusion des aspects environnementaux dans les normes relatives aux produits plastiques. Il propose une approche visant à permettre une réduction de leur impact négatif sur l'environnement sans compromettre leur objectif premier qui est d'assurer une aptitude à l'emploi adéquate des produits en question.
Les lignes directrices contenues dans le présent document sont essentiellement destinées aux rédacteurs de normes. Toutefois, outre son objectif premier, le présent document sera utile aussi à ceux qui participent aux travaux de conception et autres activités où les aspects environnementaux des plastiques sont abordés.
NOTE Le présent document est destiné à promouvoir les pratiques suivantes:
a) l'utilisation de techniques permettant d'identifier et d'évaluer l'impact environnemental des dispositions techniques spécifiées dans les normes ainsi que de réduire au minimum leurs effets néfastes;
b) l'adoption de bonnes pratiques telles que:
1) des modes opératoires pour la prévention de la pollution, par exemple des options de fin de vie et leur gestion adaptée;
2) la conservation de la matière et de l'énergie en tenant compte de l'utilisation prévue (et de la mauvaise utilisation prévisible) du produit;
3) l'utilisation en toute sécurité des substances dangereuses;
4) l'élimination de pratiques restrictives techniquement injustifiables;
5) le recours à des critères de performance plutôt qu'à des clauses d'exclusion qui seraient, par exemple, basées uniquement sur des critères de composition chimique;
6) l'utilisation de ressources renouvelables et le recours minimal aux ressources non renouvelables, si l'analyse du cycle de vie y est favorable;
c) l'adoption d'une approche équilibrée lors de l'élaboration des normes face à des questions telles que l'impact environnemental, la fonction et la performance du produit, l'hygiène et la sécurité et d'autres exigences réglementaires;
d) la révision et le réexamen réguliers des normes existantes à la lumière des innovations techniques permettant d'améliorer l'impact environnemental des produits et processus;
e) l'application d'approches analytiques du cycle de vie chaque fois qu'elles peuvent être appliquées et qu'elles sont techniquement justifiées.
Polimerni materiali - Okoljski vidiki - Splošne smernice za njihovo vključitev v standarde (ISO 17422:2018)
Ta dokument vsebuje strukturo za vključevanje okoljskih vidikov v standarde za polimerne izdelke. Predlaga pristop, ki je usmerjen v zmanjšanje morebitnih negativnih vplivov na okolje, ne da bi pri tem oviral osnovni namen zagotavljanja ustrezne primernosti obravnavanih izdelkov za uporabo.
Smernice v tem dokumentu so namenjene predvsem piscem standardov. Vendar pa ta dokument poleg svojega osnovnega namena ponuja koristne smernice vsem, ki sodelujejo pri oblikovanju in drugih dejavnostih, pri katerih se upoštevajo okoljski vidiki polimerov.
OPOMBA: Ta dokument je namenjen spodbujanju naslednjih praks:
a) uporaba tehnik za prepoznavanje in presojo vplivov tehničnih določil v standardih na okolje in za zmanjšanje njihovih škodljivih učinkov;
b) uvedba dobrih praks, kot so:
1) postopki za preprečevanje onesnaževanja, npr. z možnostmi ob koncu življenjske dobe in pravilnim upravljanjem;
2) prihranek snovi in energije glede na predvideno uporabo (in predvidljivo zlorabo) izdelka;
3) varna uporaba nevarnih snovi;
4) izogibanje tehnično neupravičenim omejevalnim praksam;
5) spodbujanje uporabe meril uspešnosti in ne točk o izključitvi, ki temeljijo na primer le na merilih za kemično sestavo;
6) uporaba obnovljivih virov in zmanjšanje uporabe neobnovljivih virov, če je ocena življenjskega cikla ugodna;
c) uvedba uravnoteženega pristopa do vprašanj, kot so vpliv na okolje, delovanje in zmogljivost izdelka, zdravje in varnost ter druge regulativne zahteve, pri razvoju standardov;
d) redno pregledovanje in pregled obstoječih standardov glede na tehnične novosti, ki omogočajo izboljšanje vpliva izdelkov in procesov na okolje;
e) uporaba analitičnih pristopov življenjskega cikla, kadar je to primerno in tehnično upravičeno.
General Information
Overview - EN ISO 17422:2019 (Plastics - Environmental aspects)
EN ISO 17422:2019 (ISO 17422:2018) provides general guidelines for incorporating environmental aspects into standards for plastics products. Its scope is to help standards writers and other stakeholders minimise adverse environmental impact while preserving product fitness for use. The document promotes a balanced approach that considers environmental impact alongside functionality, health & safety and regulatory requirements.
Key topics and technical requirements
- Framework for inclusion of environmental provisions into both test method standards and product standards, ensuring coherence across committees and working groups.
- Environmental provisions: normative elements in standards that specify measures to minimise adverse environmental impact of tests, materials or products.
- Life cycle approaches: encourages application of life cycle assessment (LCA) and eco-profiles where technically justifiable to assess inputs, outputs and impacts across a product’s life cycle.
- Good practice recommendations (document Note):
- pollution avoidance and responsible end-of-life management;
- material and energy conservation based on intended use and foreseeable misuse;
- safe use of hazardous substances and avoidance of unjustified restrictive practices;
- preference for performance criteria over simple exclusion clauses (e.g., chemical-only criteria);
- use of renewable resources and minimisation of non‑renewable resources when LCA is favourable.
- Renewable resources & energy recovery: definitions and guidance on considering renewable inputs and energy recovery (e.g., controlled combustion) where applicable.
- Regular review: standards should be reviewed and updated to reflect technical innovation and improve environmental performance.
Practical applications and users
Who uses EN ISO 17422:2019:
- Standards writers and technical committees responsible for plastics standards (ISO/CEN/TC 61 and CEN/TC 249).
- Product designers, R&D and environmental engineers integrating environmental criteria during design and material selection.
- Procurement and compliance teams seeking guidance on performance-based environmental requirements.
- Regulators and sustainability consultants when aligning product standards with circular economy and end-of-life management objectives.
Practical uses:
- Structuring environmental clauses in new or revised plastics standards.
- Selecting whether to require LCA or eco‑profile data for specific product categories.
- Shaping test methods to reduce material/energy use and minimise emissions.
Related standards
- ISO 14001:2015 (environmental management), ISO 14040:2006 (LCA principles), ISO 15270:2008 (plastics - recycling/recovery), ISO 11469 (plastics - material identification). These referenced documents support implementation of EN ISO 17422:2019.
Keywords: EN ISO 17422:2019, plastics environmental aspects, life cycle assessment, eco-profile, standards writers, renewable resources, end-of-life management.
Frequently Asked Questions
EN ISO 17422:2019 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics - Environmental aspects - General guidelines for their inclusion in standards (ISO 17422:2018)". This standard covers: This document provides a structure for inclusion of environmental aspects in standards for plastics products. It proposes an approach which is directed at minimizing any adverse environmental impact without detracting from the primary purpose of ensuring adequate fitness for use of the products under consideration. The guidance provided by this document is intended primarily for use by standards writers. Over and above its primary purpose, however, this document provides guidance of value to those involved in design work and other activities where environmental aspects of plastics are being considered. NOTE This document is intended to promote the following practices: a) the use of techniques for identifying and assessing the environmental impact of technical provisions in standards, and for minimizing their adverse effects; b) the adoption of good practices such as: 1) procedures for pollution avoidance, e.g. through end-of-life options and its proper management; 2) material and energy conservation in the light of the intended use (and foreseeable misuse) of the product; 3) safe use of hazardous substances; 4) avoidance of technically unjustifiable restrictive practices; 5) promotion of performance criteria rather than exclusion clauses such as are based, for example, only on chemical composition criteria; 6) use of renewable resources and minimization of the use of non-renewable resources, if the life cycle assessment shows favourable; c) the adoption of a balanced approach in standards development to issues such as environmental impact, product function and performance, health and safety, and other regulatory requirements; d) the regular review and revision of existing standards in the light of technical innovations, permitting improvement in the environmental impact of products and processes; e) the application of life cycle analytical approaches wherever applicable and technically justifiable.
This document provides a structure for inclusion of environmental aspects in standards for plastics products. It proposes an approach which is directed at minimizing any adverse environmental impact without detracting from the primary purpose of ensuring adequate fitness for use of the products under consideration. The guidance provided by this document is intended primarily for use by standards writers. Over and above its primary purpose, however, this document provides guidance of value to those involved in design work and other activities where environmental aspects of plastics are being considered. NOTE This document is intended to promote the following practices: a) the use of techniques for identifying and assessing the environmental impact of technical provisions in standards, and for minimizing their adverse effects; b) the adoption of good practices such as: 1) procedures for pollution avoidance, e.g. through end-of-life options and its proper management; 2) material and energy conservation in the light of the intended use (and foreseeable misuse) of the product; 3) safe use of hazardous substances; 4) avoidance of technically unjustifiable restrictive practices; 5) promotion of performance criteria rather than exclusion clauses such as are based, for example, only on chemical composition criteria; 6) use of renewable resources and minimization of the use of non-renewable resources, if the life cycle assessment shows favourable; c) the adoption of a balanced approach in standards development to issues such as environmental impact, product function and performance, health and safety, and other regulatory requirements; d) the regular review and revision of existing standards in the light of technical innovations, permitting improvement in the environmental impact of products and processes; e) the application of life cycle analytical approaches wherever applicable and technically justifiable.
EN ISO 17422:2019 is classified under the following ICS (International Classification for Standards) categories: 13.020.01 - Environment and environmental protection in general; 83.080.01 - Plastics in general. The ICS classification helps identify the subject area and facilitates finding related standards.
You can purchase EN ISO 17422:2019 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2019
Polimerni materiali - Okoljski vidiki - Splošne smernice za njihovo vključitev v
standarde (ISO 17422:2018)
Plastics - Environmental aspects - General guidelines for their inclusion in standards
(ISO 17422:2018)
Kunststoffe - Umweltaspekte - Allgemeine Richtlinien für die Aufnahme in Normen (ISO
17422:2018)
Matières plastiques - Aspects liés à l'environnement - Lignes directrices générales pour
leur prise en compte dans les normes (ISO 17422:2018)
Ta slovenski standard je istoveten z: EN ISO 17422:2019
ICS:
13.020.01 Okolje in varstvo okolja na Environment and
splošno environmental protection in
general
83.080.01 Polimerni materiali na Plastics in general
splošno
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 17422
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2019
EUROPÄISCHE NORM
ICS 13.020.01; 83.080.01
English Version
Plastics - Environmental aspects - General guidelines for
their inclusion in standards (ISO 17422:2018)
Matières plastiques - Aspects liés à l'environnement - Kunststoffe - Umweltaspekte - Allgemeine Richtlinien
Lignes directrices générales pour leur prise en compte für die Aufnahme in Normen (ISO 17422:2018)
dans les normes (ISO 17422:2018)
This European Standard was approved by CEN on 3 June 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17422:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 17422:2018 has been prepared by Technical Committee ISO/TC 61 "Plastics” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 17422:2019 by
Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2019, and conflicting national standards
shall be withdrawn at the latest by December 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 17422:2018 has been approved by CEN as EN ISO 17422:2019 without any modification.
INTERNATIONAL ISO
STANDARD 17422
Second edition
2018-06
Plastics — Environmental aspects —
General guidelines for their inclusion
in standards
Matières plastiques — Aspects liés à l'environnement — Lignes
directrices générales pour leur prise en compte dans les normes
Reference number
ISO 17422:2018(E)
©
ISO 2018
ISO 17422:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
ISO 17422:2018(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Inclusion of environmental aspects in standards . 4
4.1 General . 4
4.2 Test method standards .4
4.2.1 General. 4
4.2.2 Minimization of adverse environmental impact .4
4.2.3 Minimization of material and energy usage .5
4.3 Product standards .5
4.3.1 General. 5
4.3.2 Product functionality .5
4.3.3 Environmental aspects in product standards .5
4.3.4 Renewable resources and energy .6
4.3.5 Writers of standards .6
Annex A (informative) Scope and limitations of life cycle assessment . 7
Bibliography .11
ISO 17422:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 14,
Environmental aspects.
This second edition cancels and replaces the first edition (ISO 17422:2002), which has been technically
revised. The changes compared to the previous edition are as follows:
— Clause 1 has been revised to include “renewable resources” [item b) 6) of the Note];
— in Clause 3, 3.10 “renewable resource” and 3.11 “end-of-life” have been added;
— terms and definitions formerly in Annex A have been moved to Clause 3, except “life cycle impact
assessment (LCIA)” which has been deleted because it is not used in the document;
— subclause 4.3.4 “Renewable resources and energy” has been added;
— a Note has been added to A.4 to provide a new example of energy input;
— the Bibliography has been revised and updated.
iv © ISO 2018 – All rights reserved
INTERNATIONAL STANDARD ISO 17422:2018(E)
Plastics — Environmental aspects — General guidelines for
their inclusion in standards
1 Scope
This document provides a structure for inclusion of environmental aspects in standards for plastics
products. It proposes an approach which is directed at minimizing any adverse environmental impact
without detracting from the primary purpose of ensuring adequate fitness for use of the products
under consideration.
The guidance provided by this document is intended primarily for use by standards writers. Over and
above its primary purpose, however, this document provides guidance of value to those involved in
design work and other activities where environmental aspects of plastics are being considered.
NOTE This document is intended to promote the following practices:
a) the use of techniques for identifying and assessing the environmental impact of technical provisions in
standards, and for minimizing their adverse effects;
b) the adoption of good practices such as:
1) procedures for pollution avoidance, e.g. through end-of-life options and its proper management;
2) material and energy conservation in the light of the intended use (and foreseeable misuse) of the product;
3) safe use of hazardous substances;
4) avoidance of technically unjustifiable restrictive practices;
5) promotion of performance criteria rather than exclusion clauses such as are based, for example, only on
chemical composition criteria;
6) use of renewable resources and minimization of the use of non-renewable resources, if the life cycle
assessment shows favourable;
c) the adoption of a balanced approach in standards development to issues such as environmental impact,
product function and performance, health and safety, and other regulatory requirements;
d) the regular review and revision of existing standards in the light of technical innovations, permitting
improvement in the environmental impact of products and processes;
e) the application of life cycle analytical approaches wherever applicable and technically justifiable.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http: //www .electropedia .org/
— ISO Online browsing platform: available at https: //www .iso .org/obp
ISO 17422:2018(E)
3.1
design
creative activity that, based on expressed or implied needs, existing means and technological
possibilities, results in the definition of technical solutions for a product that can be commercially
manufactured or fabricated into prototypes
3.2
eco-profile
partial life cycle inventory analysis (3.14) beginning at the raw material extraction phase and ending at
the point where the plastics product (3.8) is ready for transfer to the next operator in the supply chain
3.3
environmental aspect
element of an organization’s activities, products or services that interacts or can interact with the
environment
[SOURCE: ISO 14001:2015, 3.2.2]
3.4
environmental impact
change to the environment, whether adverse or beneficial, wholly or partially resulting from an
organization’s environmental aspects (3.3)
[SOURCE: ISO 14001:2015, 3.2.4]
3.5
environmental provision
normative element of a standard that specifies measures for minimizing adverse environmental impact
of a test method, material or product
3.6
life cycle
consecutive and interlinked stages of a product system, from raw material acquisition or generation
from natural resources to the final disposal
[SOURCE: ISO 14040:2006, 3.1]
3.7
life cycle assessment
LCA
compilation and evaluation of the inputs (3.13), outputs (3.16) and the potential environmental impacts
(3.4) of a product system throughout its life cycle (3.6)
[SOURCE: ISO 14040:2006, 3.2]
3.8
plastics product
material or combination of materials, semi-finished or finished product that is within the scope of
ISO/TC 61
3.9
product standard
standard that specifies requirements to be fulfilled by a product or group of products
3.10
renewable resource
any natural resource in the form of material or energy, which is replenished or replaced on natural
processes
Note 1 to entry: Renewable resource includes agricultural products, biomass, solar, wind, water, hydro power,
geothermal, tidal energy and renewed biomass etc. and excludes recovered or wasted energy.
2 © ISO 2018 – All rights reserved
ISO 17422:2018(E)
Note 2 to entry: Organic fraction of municipal waste is considered as a renewable energy source.
Note 3 to entry: Whether the energy stored in a technical system is renewable or not depends on the nature of
the original energy source.
Note 4 to entry: Criteria to categorize an energy source as renewable differ amongst jurisdictions, based on local
environmental or other reasons.
3.11
end-of-life
life cycle stage of a product when a proper waste management is applied for discarded end-user
products
Note 1 to entry: For plastics waste recycling and recovery, see ISO 11469 and ISO 15270. See also Annex A.
3.12
energy recovery
production of useful energy through direct and controlled combustion
Note 1 to entry: Solid-waste incinerators producing hot water, steam and/or electricity are a common form of
energy recovery.
Note 2 to entry: From a technical point of view, the term “energy recovery” applies to any process where the
calorific value or the sensible heat of a material is wholly, or partially, converted into useful energy.
[SOURCE: ISO 15270:2008, 3.11, modified — Note 2 to entry has been added.]
3.13
input
material or energy which enters a unit process
3.14
life cycle inventory analysis
LCI
phase of life cycle assessment (3.7) involving the compilation and quantification of inputs (3.13) and
outputs (3.16) for a product throughout its life cycle (3.6)
Note 1 to entry: As life cycle inventory analysis describes a product system and not the product in isolation, the
life cycle data cover factors including materials, design, performance, use pattern and waste management.
[SOURCE: ISO 14040:2006, 3.3, modified — Note 1 to entry has been added.]
3.15
mechanical recycling
processing of plastics waste into secondary raw material or products without significantly changing
the chemical structure of the material
Note 1 to entry: This definition does not generally cover chemical or feedstock recycling processes applied to
plastics.
[SOURCE: ISO 15270:2008, 3. 21, modified — Note 1 to entry has been changed.]
3.16
output
material or energy which leaves a unit process
Note 1 to entry: Such material includes raw materials, intermediate products, finished products, emissions
and waste.
ISO 17422:2018(E)
4 Inclusion of environmental aspects in standards
4.1 General
In the preparation of International Standards, close co-ordination within and among sub-committees
and working groups responsible for different plastics products or processes is necessary in order
to create a coherent approach to the incorporation of environmental provisions. Appropriate co-
ordination will ensure that such activity on environmental provisions will neither retard nor inhibit
the normal standards development process.
Any plan to prepare a new standard or to revise an existing standard with inclusion of environmental
provisions should define, as far as possible, both the purpose of the standard and its expected major
users. This exercise will help to determine how the standard is likely to be used, for example for quality
control or for conformity assessment, to identify the relevant environmental aspects and to assess the
users’ level of expertise, needs and expectations.
Standards should be drafted with a view to providing provisions which eliminate or reduce any
identified environmental hazards, and, where possible, these provisions should be expressed in terms of
verifiable preventive measures. Requirements for preventive measures should be expressed precisely,
clearly and with technical accuracy, and the requirements for verification should be clearly stated.
Whenever appropriate, the standard should state what environmentally relevant information has to be
provided to persons involved with the product or process.
NOTE Terminology of plastics is defined in ISO 472. This document additionally includes environmental terms.
4.2 Test method standards
4.2.1 General
International Standards for the testing of plastics products should also provide scope for application of
ISO Guide 64 by drawing attention to the importance of product sustainability issues such as resource
conservation and pollution prevention.
Where such issues are already being addressed (for example within ISO/TC 61/SC 5, Physical-chemical
properties, ISO/TC 61/SC 6, Ageing, chemical and environmental resistance and ISO/TC 61/SC 14,
Environmental aspects, etc.), this fact should be brought to the attention of the users of the standards by
means of an introductory statement within the text of the standard. Standards writers should take this
into account whenever existing standards are being revised or new ones are being
...
The article discusses the guidelines provided by EN ISO 17422:2019 for including environmental aspects in standards for plastic products. The purpose of these guidelines is to minimize any negative environmental impact while ensuring the fitness for use of these products. The document is primarily intended for standards writers but also provides valuable guidance for those involved in design work and other activities related to plastics and the environment. The document promotes practices such as identifying and assessing environmental impacts, pollution avoidance, material and energy conservation, safe use of hazardous substances, and the use of renewable resources. It also emphasizes the need for a balanced approach in standards development, regular review and revision of existing standards, and the application of life cycle analytical approaches when applicable.
記事のタイトル：EN ISO 17422:2019 - プラスチック - 環境面 - 標準への一般的なガイドライン（ISO 17422:2018） 記事の内容：この文書は、プラスチック製品の標準に環境面を含めるための枠組みを提供しています。この文書は、製品の十分な使用適格性を確保する主な目的を損なわずに、悪影響を最小限に抑えるアプローチを提案します。 この文書のガイダンスは、主に標準の執筆者が利用することを意図していますが、プラスチックと環境に関連する設計作業やその他の活動に携わっている人々にも価値あるガイダンスを提供します。 注意：この文書は以下のような実践を促進するために作成されています： a）標準の技術的な規定の環境への影響を特定し評価するための技術手法の使用と、悪影響を最小限に抑えるための手順の採用; b）以下のような良い実践の採用： 1）エンドオブライフオプションおよび適切な管理による汚染回避手順; 2）製品の使用目的（および予見される誤用）に応じた材料およびエネルギーの節約; 3）有害物質の安全な使用; 4）技術的に正当化されていない制限的な実践の回避; 5）化学組成基準に基づく排除条項ではなく、性能基準の推進; 6）生産ライフサイクル評価が有利な場合、再生可能資源の使用と非再生可能資源の最小化; c）環境への影響、製品の機能と性能、健康と安全、および他の規制要件などの問題に対してバランスの取れたアプローチを標準開発に採用; d）製品やプロセスの環境への影響を改善できるよう、既存の標準を定期的に見直し改訂する; e）適用可能で技術的に正当化される場合には、ライフサイクル分析手法の適用。
기사 제목: EN ISO 17422:2019 - 플라스틱 - 환경 측면 - 표준에 대한 일반적인 가이드라인 (ISO 17422:2018) 기사 내용: 이 문서는 플라스틱 제품 표준에 환경 측면을 포함하는 구조를 제공합니다. 이는 주된 목적인 해당 제품의 적합성을 보장하는 것을 해치지 않으면서 부정적인 환경 영향을 최소화하기 위한 접근 방식을 제안합니다. 이 문서는 주로 표준 작성자가 사용하도록 지침을 제공하지만, 주된 목적 외에도 플라스틱의 환경 측면이 고려되는 설계 작업 및 기타 활동에 참여하는 사람들에게 가치있는 지침을 제공합니다. 참고: 이 문서는 다음과 같은 관행을 촉진하기 위해 고안되었습니다. a) 표준의 기술 규정의 환경 영향을 식별하고 평가하고 부정적인 영향을 최소화하기 위한 기술을 사용하는 것 b) 다음과 같은 좋은 관행의 채택: 1) 폐기물 처리를 통한 오염 방지 절차 2) 제품의 의도된 사용 (그리고 예상되는 오용)을 고려한 재료 및 에너지 절약 3) 유해 물질의 안전한 사용 4) 기술적으로 타당하지 않은 제한적 관행 회피 5) 화학 조성 기준에만 기초한 제외 절항 대신 성능 기준의 촉진 6) 라이프사이클 평가가 유리한 경우 재생 가능한 자원 사용 및 재생 불가능한 자원의 최소화 c) 환경 영향, 제품 기능 및 성능, 건강 및 안전, 기타 법적 요구 사항과 같은 문제에 대한 균형 잡힌 접근 방식의 채택 d) 제품 및 프로세스의 환경 영향을 개선하기 위해 기존 표준을 주기적으로 검토하고 개정하는 것의 중요성 e) 적용 가능하고 타당한 경우 라이프사이클 분석 접근 방식의 적용
기사 제목: EN ISO 17422:2019 - 플라스틱 - 환경 측면 - 표준에 포함되는 일반 가이드라인 (ISO 17422:2018) 기사 내용: 본 문서는 플라스틱 제품 표준에 환경 측면을 포함하기 위한 구조를 제공합니다. 이 문서는 제품의 적절한 사용 용도를 보장하는 주된 목적을 해치지 않으면서 부정적인 환경적 영향을 최소화하기 위한 접근 방식을 제안합니다. 본 문서는 주로 표준 작성자들이 사용할 수 있도록 지침을 제공하며, 제품 디자인 작업 및 플라스틱의 환경 측면 고려 등과 관련된 활동에 참여하는 사람들에게도 가치 있는 지침을 제공합니다. 참고: 본 문서는 다음과 같은 실천 방법을 촉진하기 위해 작성되었습니다: a) 표준의 기술적 규정의 환경적 영향을 식별하고 평가하기 위한 기법 사용 및 부정적인 영향 최소화를 위한 절차 채택; b) 다음과 같은 좋은 실천 방법의 채택: 1) 종료 생활 옵션을 통한 오염 회피 절차 및 적절한 관리; 2) 제품의 사용 용도 (및 예상되는 오용)를 고려한 재료 및 에너지 보전; 3) 유해 물질의 안전한 사용; 4) 기술적으로 정당화되지 않은 제한적인 실천 방식 회피; 5) 화학 조성 기준에만 기반한 배제 조항 대신 성능 기준의 촉진; 6) 생애주기 평가 결과가 유리한 경우 재생 가능 자원의 사용 및 재생 불가능 자원의 최소화; c) 환경적 영향, 제품 기능 및 성능, 건강 및 안전, 기타 규제 요구 사항과 같은 문제에 대한 균형있는 접근 방식 채택; d) 제품 및 공정의 환경적 영향을 개선할 수 있도록 기존 표준을 정기적으로 검토하고 개정; e) 적용 가능하고 기술적으로 정당화된 경우 생애주기 분석 접근 방식 적용.
The article introduces the standard EN ISO 17422:2019, which provides guidelines for including environmental aspects in standards for plastic products. The main goal is to minimize the negative environmental impact of these products while ensuring they are fit for use. The document is primarily aimed at standards writers, but it also offers valuable guidance for those involved in design and other activities related to plastics and the environment. The standard promotes practices such as assessing environmental impact, pollution avoidance, material and energy conservation, safe use of hazardous substances, avoiding unnecessary restrictions, considering performance criteria instead of exclusion clauses based solely on chemical composition, using renewable resources, and adopting a balanced approach in standards development. It also emphasizes the importance of regularly reviewing and revising existing standards to improve the environmental impact of products and processes, and the use of life cycle analysis when appropriate and justified.
記事タイトル：EN ISO 17422:2019 - プラスチック - 環境面 - 標準への一般的なガイドライン（ISO 17422:2018） 記事内容：この文書は、プラスチック製品の標準に環境面を含めるためのガイドラインを提供します。製品の妥当な使用を確保する主な目的を損なわずに、悪影響な環境への影響を最小限に抑える手法を提案しています。 この文書は主に標準策定者向けの指針として提供されていますが、プラスチックと環境に関連する設計作業やその他の活動に従事する人々にも有益な指針を提供しています。 注：この文書は以下の慣行を推進することを意図しています。 a) 標準の技術的規定の環境影響を特定し、評価し、悪影響を最小限に抑えるための技術手法の使用 b) 次のような良い慣行の採用： 1）廃棄物処理による汚染回避手順 2）製品の意図された使用（及び予想される誤用）に応じた資源およびエネルギーの節約 3）有害物質の安全な使用 4）技術的に正当化されない制限的な慣行の回避 5）化学組成基準に基づく排除規定ではなく、性能基準の採用 6）ライフサイクルアセスメントが有利な場合の再生可能な資源の使用と再生不可能な資源の最小化 c) 環境影響、製品の機能と性能、健康と安全、その他の規制要件など、様々な問題にバランスの取れたアプローチを標準の開発に採用すること d) 製品とプロセスの環境影響を改善するために、既存の標準を定期的に見直し、改訂する重要性 e) 適用可能かつ正当化される場合には、ライフサイクル分析の手法の適用
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...