iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1:1998

(Main)

Flued oil stoves with vaporizing burners

Flued oil stoves with vaporizing burners

This standard applies to flued oil stoves with one or more vaporizing burners (hereafter referred to as 'stoves') as used for individual heating in the domestic field and having either a draught regulator or a combustion air limiter as defined in 3.13 and a nominal heating capacity of not more than 15 kW. It is not applicable for built-in equipment.

Heizöfen für flüssige Brennstoffe mit Verdampfungsbrennern und Schornsteinanschluß

Diese Europäische Norm gilt für Heizöfen für flüssige Brennstoffe mit einem oder mehreren Verdampfungsbrennern mit oder ohne Ölbehälter und Schornsteinanschluß (nachfolgend kurz: Heizöfen), die zur Beheizung eines einzelnen Raumes im häuslichen Bereich verwendet werden und entweder einen Förderdruckbegrenzer oder einen Verbrennungsluftbegrenzer nach 3.13 und eine Nennwärmeleistung von nicht mehr als 15 kW haben. Sie gilt nicht für Einbaugeräte.

Poêles à combustible liquide avec brûleurs à vaporisation raccordés à un conduit d'évacuation des produits de la combustion

La présente norme européenne concerne les poêles à combustibles liquides comportant un ou plusieurs brûleurs à vaporisation, avec ou sans réservoir, raccordés à un conduit d'évacuation des produits de la combustion (dénommés plus brièvement dans la suite du texte: poêles) et utilisés pour le chauffage d'une pièce unique dans le domaine domestique et qui comportent soit un limiteur d'air de combustion, comme indiqué en 3.13, et ont une puissance calorifique nominale ne dépassant pas 15 kW. Elle ne s'applique pas aux appareils encastrés.

Peči za ogrevanje na tekoča goriva z uparjalnimi gorilniki in priključkom na dimnik

General Information

Status
Published
Publication Date
19-May-1998
ICS
97.100.40 - Liquid fuel heaters
Technical Committee
CEN/TC 46 - Oil stoves
Drafting Committee
CEN/TC 46 - Oil stoves
Current Stage
9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
Completion Date
11-Oct-2017
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/129 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on space heating appliances
M/577 - COMMISSION IMPLEMENTING DECISION of of 29.7.2021 on a standardisation request to the European Committee for Standardisation as regards space heating appliances in support of Regulation (EU) No 305/2011 of the European Parliament and of the Council
Ref Project
SIST EN 1:2000 - Flued oil stoves with vaporizing burners

Relations

Amended By
EN 1:1998/A1:2007 - Flued oil stoves with vaporizing burners
Effective Date
22-Dec-2008
Revised
prEN 1-1 - Residential liquid fuel burning appliances - Part 1: General requirements and test methods
Effective Date
15-Mar-2023
Revised
prEN 1-2 - Residential liquid fuel burning appliances - Part 2: Flued oil stoves with vaporizing burners
Effective Date
15-Mar-2023
Revised
prEN 1 rev - Flued oil stoves with vaporizing burners
Effective Date
19-Jan-2023

Buy Standard

EN 1:2000EN 1:2000
PreviousNext
Standard
EN 1:2000
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Heizöfen für flüssige Brennstoffe mit Verdampfungsbrennern und SchornsteinanschlußPoeles a combustible liquide avec bruleurs a vaporisation raccordés a un conduit d'évacuation des produits de la combustionFlued oil stoves with vaporizing burners97.100.40Liquid fuel heatersICS:Ta slovenski standard je istoveten z:EN 1:1998SIST EN 1:2000en01-junij-2000SIST EN 1:2000SLOVENSKI
STANDARD



SIST EN 1:2000



SIST EN 1:2000



SI
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1:1998/A1:2007(Amendment)
Flued oil stoves with vaporizing burners
SIST EN 1:2000/A1:2007

EN 1/prA1 covers all points to fulfil the requirements of mandate M/129 under the CPD given from the EC to CEN.

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1-1(Main)
Residential liquid fuel burning appliances - Part 1: General requirements and test methods
oSIST prEN 1-1:2023

This document is applicable to residential liquid fuel burning appliances intended for space heating.
This document specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of appliances fired by liquid fuel (hereafter referred to as "appliance(s)") and provides instructions for them. Furthermore, it also gives provisions for the evaluation of conformity, i.e. initial type testing (ITT) and factory production control (FPC) and marking of these appliances.
This document specifies the test methods for the determination of the smoke number, and CO, NOx, and OGC emission test methods.
This document is not applicable for:
-   built-in appliances;
-   appliances equipped with an atomizing burner;
-   appliances incorporating a boiler or connected to a water system.

  • Draft
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1-2(Main)
Residential liquid fuel burning appliances - Part 2: Flued oil stoves with vaporizing burners
oSIST prEN 1-2:2023

This document is applicable to oil stoves. These appliances have one or more vaporizing burners and a nominal heating capacity of not more than 15 kW and are equipped either with a draught regulator or a combustion air limiter.
The intended use of the appliances is space heating in residential buildings.
This document is also applicable to appliances with fan assisted vaporizing burners.
According to the type of fuels used in the country of destination, the appliances are supplied for use with either:
-   fuel oil with a maximum kinematic viscosity of 6,0 mm²/s at 20 °C;
-   or kerosene with a flash point of not less than 40 °C.
This document is not applicable for:
-   built-in appliances;
-   appliances equipped with an atomizing burner;
-   appliances incorporating a boiler or connected to a water system.
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of flued oil stoves with vaporizing burners.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1 rev(Main)
Flued oil stoves with vaporizing burners
oSIST prEN 1:2013

This standard applies to flued oil stoves with one or more vaporizing burners (hereafter referred to as "stoves") as used for individual heating in the domestic field and having either a draught regulator or a combustion air limiter as defined in 3.13 and a nominal heating capacity of not more than 15 kW. This standard also applies to appliances with fan assisted vaporizing burners. This standard does not cover - Built-in appliances - appliances equipped with an atomizing burner - appliances incorporating a boiler or connected to a water system. According to the type of fuels used in the country of destination, the stoves are supplied for use with either: - fuel oil with a maximum kinematic viscosity of 6,0 mm²/s at 20 °C - or kerosene with a flash point of not less than 40 °C

  • Draft
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 15738:2008(Main)
Petroleum products - Heating fuels - Need, feasibility and required deliverables for a common European specification
SIST-TP CEN/TR 15738:2008

This report gives background information about LHO market volumes, fuel specifications, regulations, taxes, duties, logistics and distribution systems for LHO in different European countries.
It assesses the necessity, and whether it is appropriate, to recommend the development of a CEN standard for liquid heating fuels.

  • Technical report
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1:1998/A1:2007(Amendment)
Flued oil stoves with vaporizing burners
SIST EN 1:2000/A1:2007

EN 1/prA1 covers all points to fulfil the requirements of mandate M/129 under the CPD given from the EC to CEN.

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15035:2006(Main)
Heating boilers - Special requirements for oil fired room sealed units up to 70 kW
SIST EN 15035:2007

This European Standard applies to type CX3 central heating boilers as specified in 4.1, equipped with atomizing oil burners:
   type C13, type C33, and type C53 boilers, including their combustion air supply and combustion products evacuation ducts and their terminals;
   type C43 boilers including their connection ducts but without the chimney which is erected as a shared duct system and which is part of the building;
   type C63 boilers, including the connecting piece as specified in 3.7, if not integrated into the boiler;
   type C83 boilers, including their connection ducts but without the chimney which is part of the building;
   that have a nominal useful heat output below or equal to 70 kW;
   where the temperature of the water does not exceed 100 °C during normal operation;
   where the maximum water-side operating pressure does not exceed 8 bar.
This European Standard is intended to establish specific requirements and test methods for type C atomizing oil burning central heating boilers with respect to construction, safety, fitness for purpose, rational use of energy, classification and marking.
This European Standard only covers standard tests.
For boilers that produce domestic hot water by a drum or exchanger, integrated or juxtaposed, (by accumulation of instant production), this standard only applies to hot water reheating system components that are not subject to operating conditions applicable to the boiler heating system.
This European Standard covers units consisting of boilers equipped with burners that meet the requirements of EN 267, with the following exceptions:
   maximum NOx and CO emission values, estimated for boilers according to the classes defined in
EN 303-2;
   air factor value, defined by the manufacturer and stated in the boiler’s technical specifications;
   marking and/or burner data plate which may provide information for the boiler data plate;
   installation recommendations for installing the burner on the boiler included

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13842:2004(Main)
Oil fired forced convection air heaters - Stationary and transportable for space heating
SIST EN 13842:2005

This European Standard specifies the requirements and test methods for the safety and efficiency of oil-fired air heaters using only forced draught oil burners, hereafter referred to as "appliances".
This European Standard applies to stationary and portable appliances. It also applies to appliances intended for outdoor installation. Provision of the heated air may be by means of ducting or may be directly into the heated space.
For the purpose of this standard the heat generation is by the combustion of liquid fuel oils as defined in EN 267 (gas oil with a viscosity at the burner inlet of 1,6 mm²/s (cSt) up to 6 mm²/s (cSt) at 20 °C). Alternatively, if the manufacturer requests, the fuel of kerosene may be used as defined in EN 304:1992. Kerosene with a viscosity at the burner of 1,3 mm2/s (cSt) to 2,9 mm2/s (cSt) at 20 °C) or other suitable liquid fuel oils may also be used.
This standard does not apply to:
- appliances intended for use in a single unit residential dwelling;
- appliances of the condensing type;
- appliances with atmospheric burners without a fan to assist the transportation of combustion air;
- dual purpose air conditioning appliances (heating and cooling);
- appliances where the air is heated by an intermediate fluid;
- appliances fitted with manual or automatic flue dampers;
- appliances having multiple heating units with a single flue;
- appliances fitted with more than one flue outlet.
This European Standard is applicable to appliances which are intended to be type tested.
NOTE   Requirements for appliances which are not type tested would need to be subject to further consideration.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1-2(Main)
Residential liquid fuel burning appliances - Part 2: Flued oil stoves with vaporizing burners
oSIST prEN 1-2:2023

This document is applicable to oil stoves. These appliances have one or more vaporizing burners and a nominal heating capacity of not more than 15 kW and are equipped either with a draught regulator or a combustion air limiter.
The intended use of the appliances is space heating in residential buildings.
This document is also applicable to appliances with fan assisted vaporizing burners.
According to the type of fuels used in the country of destination, the appliances are supplied for use with either:
-   fuel oil with a maximum kinematic viscosity of 6,0 mm²/s at 20 °C;
-   or kerosene with a flash point of not less than 40 °C.
This document is not applicable for:
-   built-in appliances;
-   appliances equipped with an atomizing burner;
-   appliances incorporating a boiler or connected to a water system.
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of flued oil stoves with vaporizing burners.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1-1(Main)
Residential liquid fuel burning appliances - Part 1: General requirements and test methods
oSIST prEN 1-1:2023

This document is applicable to residential liquid fuel burning appliances intended for space heating.
This document specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of appliances fired by liquid fuel (hereafter referred to as "appliance(s)") and provides instructions for them. Furthermore, it also gives provisions for the evaluation of conformity, i.e. initial type testing (ITT) and factory production control (FPC) and marking of these appliances.
This document specifies the test methods for the determination of the smoke number, and CO, NOx, and OGC emission test methods.
This document is not applicable for:
-   built-in appliances;
-   appliances equipped with an atomizing burner;
-   appliances incorporating a boiler or connected to a water system.

  • Draft
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day