Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel

This part of EN 14483 describes a test method for the determination of vitreous and porcelain enamelled articles to resistance to attack by alkaline liquids at temperatures between 25 °C and 95 °C. The apparatus used is a cylindrical vessel in which only one enamelled specimen is tested.
NOTE 1   The test method was initially set up for determination of the resistance of vitreous and porcelain enamels to a hot sodium hydroxide solution. Within the scope of this standard the resistance of other alkaline liquids can be tested.
NOTE 2   This part of EN 14483, which uses a cylindrical vessel is generally used for tests carried out on vitreous and porcelain enamel coatings for the chemical industry.

Emails und Emaillierungen - Bestimmung der Beständigkeit gegen chemische Korrosion - Teil 4: Bestimmung der Beständigkeit gegen chemische Korrosion durch alkalische Flüssigkeiten unter Verwendung eines Gerätes mit zylindrischem Gefäß

Dieser Teil von EN 14483 legt ein Prüfverfahren zur Bestimmung der Beständigkeit von emaillierten Gegen-ständen gegen den Angriff alkalischer Flüssigkeiten bei Temperaturen zwischen 25 °C und 95 °C fest. Das verwendete Gerät besteht aus einem zylindrischen Gefäß, in dem nur eine emaillierte Probe geprüft wird.
Das Prüfverfahren wurde ursprünglich zur Bestimmung der Beständigkeit von Emails gegen eine heiße Natronlauge entwickelt. Innerhalb des Anwendungsbereiches dieser Norm kann die Beständigkeit gegen weitere alkalische Flüssigkeiten geprüft werden.
ANMERKUNG   Dieser Teil von EN 14483, in dem ein zylindrisches Gefäß eingesetzt wird, wird im Allgemeinen bei Prüfungen angewendet, die an Email-Überzügen für die chemische Industrie durchgeführt werden.

Emaux vitrifiés - Détermination de la résistance à la corrosion chimique - Partie 4: Détermination de la résistance à la corrosion chimique par des liquides alcalins dans un récipient cylindrique

La présente partie de l'EN 14483 décrit une méthode d'essai permettant de déterminer la résistance d'articles émaillés vitrifiés à l'attaque de liquides alcalins à des températures situées entre 25 °C et 95 °C. L'appareillage utilisé est un récipient cylindrique dans lequel une seule éprouvette émaillée est soumise à l'essai.
NOTE 1   La méthode d'essai a initialement été établie pour la détermination de la résistance d'émaux vitrifiés à une solution d'hydroxyde de sodium chaud. Dans le cadre du domaine d'application de la présente norme la résistance à d'autres liquides alcalins peut être soumise à l'essai.
NOTE 2   La présente partie de l'EN 14483, qui utilise un récipient cylindrique, est généralement utilisée pour des essais réalisés sur des revêtements en émaux vitrifiés pour l'industrie chimique.

Steklasti in porcelanski emajli – Ugotavljanje odpornosti proti kemični koroziji – 4. del: Ugotavljanje odpornosti proti kemični koroziji z alkalnimi tekočinami in valjasto posodo

General Information

Status
Withdrawn
Publication Date
15-Jun-2004
Withdrawal Date
17-May-2011
ICS
25.220.50 - Enamels
Technical Committee
CEN/TC 262 - Metallic and other inorganic coatings
Drafting Committee
CEN/TC 262/WG 5 - Vitreous enamel coatings
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
18-May-2011
Completion Date
18-May-2011
Ref Project
SIST EN 14483-4:2004 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel

Relations

Replaced By
EN ISO 28706-4:2011 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2008)
Effective Date
21-May-2011
Referred By
EN ISO 15494:2015 - Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
Effective Date
28-Jan-2026
Referred By
EN 124-6:2015 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
Effective Date
28-Jan-2026
Referred By
EN 12201-1:2011 - Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
Effective Date
28-Jan-2026
Referred By
EN 15632-1:2009 - District heating pipes - Pre-insulated flexible pipe systems - Part 1: Classification, general requirements and test methods
Effective Date
28-Jan-2026
Referred By
EN ISO 15494:2018 - Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
Effective Date
28-Jan-2026
Referred By
EN 1555-1:2010 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
Effective Date
28-Jan-2026
Referred By
EN 253:2009 - District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
Effective Date
28-Jan-2026

Get Certified

Connect with accredited certification bodies for this standard

National Aerospace and Defense Contractors Accreditation Program (NADCAP)

Global cooperative program for special process quality in aerospace.

ANAB United States Verified
Visit Website

CARES (UK Certification Authority for Reinforcing Steels)

UK certification for reinforcing steels and construction.

UKAS United Kingdom Verified
Visit Website

DVS-ZERT GmbH

German welding certification society.

DAKKS Germany Verified
Visit Website

Sponsored listings

Frequently Asked Questions

EN 14483-4:2004 is a standard published by the European Committee for Standardization (CEN). Its full title is "Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel". This standard covers: This part of EN 14483 describes a test method for the determination of vitreous and porcelain enamelled articles to resistance to attack by alkaline liquids at temperatures between 25 °C and 95 °C. The apparatus used is a cylindrical vessel in which only one enamelled specimen is tested. NOTE 1 The test method was initially set up for determination of the resistance of vitreous and porcelain enamels to a hot sodium hydroxide solution. Within the scope of this standard the resistance of other alkaline liquids can be tested. NOTE 2 This part of EN 14483, which uses a cylindrical vessel is generally used for tests carried out on vitreous and porcelain enamel coatings for the chemical industry.

This part of EN 14483 describes a test method for the determination of vitreous and porcelain enamelled articles to resistance to attack by alkaline liquids at temperatures between 25 °C and 95 °C. The apparatus used is a cylindrical vessel in which only one enamelled specimen is tested. NOTE 1 The test method was initially set up for determination of the resistance of vitreous and porcelain enamels to a hot sodium hydroxide solution. Within the scope of this standard the resistance of other alkaline liquids can be tested. NOTE 2 This part of EN 14483, which uses a cylindrical vessel is generally used for tests carried out on vitreous and porcelain enamel coatings for the chemical industry.

EN 14483-4:2004 is classified under the following ICS (International Classification for Standards) categories: 25.220.50 - Enamels. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 14483-4:2004 has the following relationships with other standards: It is inter standard links to EN ISO 28706-4:2011, EN ISO 15494:2015, EN 124-6:2015, EN 12201-1:2011, EN 15632-1:2009, EN ISO 15494:2018, EN 1555-1:2010, EN 253:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 14483-4:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Emails und Emaillierungen - Bestimmung der Beständigkeit gegen chemische Korrosion - Teil 4: Bestimmung der Beständigkeit gegen chemische Korrosion durch alkalische Flüssigkeiten unter Verwendung eines Gerätes mit zylindrischem GefäßEmaux vitrifiés - Détermination de la résistance a la corrosion chimique - Partie 4: Détermination de la résistance a la corrosion chimique par des liquides alcalins dans un récipient cylindriqueVitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of res
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...