iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 12543-6:1998

(Main)

Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:1998)

Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:1998)

This part of this European Standard specifies defects of finished sizes and test methods with regard to the appearance when looking through the glass. Special attention is paid to acceptability criteria in the vision area. These criteria apply to products at the time of supply.

Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas -Teil 6: Aussehen (ISO 12543-6:1998)

Dieser Teil der vorliegenden Europäischen Norm legt Fehler in der Glasscheibe, der Zwischenschicht und Prüfverfahren in Bezug auf das Aussehen fest. Besondere Aufmerksamkeit gilt den Annahmekriterien im Sichtfeld. Diese Kriterien werden auf Erzeugnisse zum Zeitpunkt der Lieferung angewendet.

Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Partie 6: Aspect (ISO 12543-6:1998)

La présente partie de cette norme européenne spécifie les défauts que l'on peut rencontrer dans les mesures fixes et les méthodes d'évaluation de l'aspect lorsqu'on regarde au travers du vitrage. Une attention particulière est portée aux critères d'acceptabilité dans la zone visible. Ces critères s'appliquent aux produits au moment de la livraison.

Steklo v stavbah - Lamelirano steklo in lamelirano varnostno steklo - 6. del: Izgled (ISO 12543-6:1998)

General Information

Status
Withdrawn
Publication Date
14-Jun-1998
Withdrawal Date
14-Aug-2011
ICS
81.040.20 - Glass in building
Technical Committee
CEN/TC 129 - Glass in building
Drafting Committee
CEN/TC 129/WG 3 - Laminated glass
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Aug-2011
Completion Date
15-Aug-2011
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
Ref Project
SIST EN ISO 12543-6:1999 - Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:1998)

Relations

Replaced By
EN ISO 12543-6:2011 - Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:2011)
Effective Date
20-Aug-2011
Parent
EN ISO 12543-1:1998 - Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:1998)
Effective Date
22-Dec-2008

Buy Standard

EN ISO 12543-6:1999EN ISO 12543-6:1999
PreviousNext
Standard
EN ISO 12543-6:1999
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12543-6:1999
01-november-1999
Steklo v stavbah - Lamelirano steklo in lamelirano varnostno steklo - 6. del: Izgled
(ISO 12543-6:1998)
Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance
(ISO 12543-6:1998)
Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas -Teil 6: Aussehen (ISO
12543-6:1998)
Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Partie 6: Aspect
(ISO 12543-6:1998)
Ta slovenski standard je istoveten z: EN ISO 12543-6:1998
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
SIST EN ISO 12543-6:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17871:2024(Main)
Glass in building - Spectrophotometric characteristics of glass products - Validation procedure for calculation tool.
SIST EN 17871:2024

This standard provides a procedure to validate a calculation tool of spectrophotometric and thermal characteristics of the glass products following EN 410 or EN 673. It provides also the methodology to correctly use measured data in the calculation tool.  
The following characteristics are included in the scope of this standard:
- light transmittance (tv)
- light reflectance - both sides (rv, r'v)
- solar direct transmittance (te)
- solar direct reflectance – both sides (re, r'e)
- total solar energy transmittance (solar factor or g value) (g)
- thermal transmittance (U value) in the vertical position
The following characteristics are excluded from the scope of this standard:
- UV transmittance (tuv)
- shading coefficient (SC)
- general colour rendering index (Ra)
- thermal transmittance (U value) at angles other than vertical

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17839:2023(Main)
Glass in building - Glazing and airborne sound insulation - Validation procedure for calculation tools
SIST EN 17839:2024

This document specifies a procedure to validate a calculation tool based on simulation, analytical calculation and/or interpolation of airborne sound insulation characteristics of glass products.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12758:2019+A1:2023(Main)
Glass in building - Glazing and airborne sound insulation - Product descriptions, determination of properties and extension rules
SIST EN 12758:2019+A1:2023

This European Standard assigns sound insulation values to all transparent, translucent and opaque glass products, described in the European Standards for basic, special basic or processed glass products, when intended to be used in glazed assemblies in buildings, and which exhibit properties of acoustic protection, either as a prime intention or as a supplementary characteristic.
This document outlines the procedure, by which glass products may be rated, according to their acoustic performance which enables assessment of compliance with the acoustic requirements of buildings.
Rigorous technical analysis of measurement data remains an option, but this standard is intended to enable the derivation of simpler indices of performance, which can be adopted with confidence by non-specialists.
By adopting the principles of this standard the formulation of acoustic requirements in Building Codes and for product specification to satisfy particular needs for glazing is simplified.
It is recognised that the acoustic test procedures contained within EN ISO 140-1 and EN ISO 140-3 relate only to glass panes and their combinations. Although the same principles should be followed as closely as possible, it is inevitable that some compromises are necessary, because of the bulkier construction of other glazing types, e.g. glass blocks, paver units, channel-shaped glass, structural glazing and structural sealant glazing. Guidelines on how to adapt the test procedures for these glazing types are offered in Clause 4.
All the considerations of this standard relate to panes of glass/glazing alone. Incorporation of them into windows may cause changes in acoustic performance as a result of other influences, e.g. frame design, frame material, glazing material/method, mounting method, air tightness, etc. Measurements of the sound insulation of complete windows (glass and frame) may be undertaken to resolve such issues.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17635:2022(Main)
Glass in building - Shatter properties - Requirements and assessment methods
SIST EN 17635:2023

This document gives test methods to assess the shatter properties of different types of monolithic flat glass for use in building and construction works, for which a specific fragmentation pattern is required when tested under defined conditions.
NOTE Thermally treated monolithic glass is a product for which such a requirement exists.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12543-5:2021(Main)
Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2021)
SIST EN ISO 12543-5:2022

This document specifies dimensions, limit deviations and edge finishes of laminated glass and laminated safety glass for use in building.
This document is not applicable to panes having an area less than 0,05 m2.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12543-2:2021(Main)
Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2021)
SIST EN ISO 12543-2:2022

This document specifies performance requirements for laminated safety glass as defined in ISO 12543-1.
NOTE       Any defects that are found in installed laminated safety glass are dealt with in ISO 12543-6.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12543-1:2021(Main)
Glass in building - Laminated glass and laminated safety glass - Part 1: Vocabulary and description of component parts (ISO 12543-1:2021)
SIST EN ISO 12543-1:2022

This document defines terms and describes component parts for laminated glass and laminated safety glass for use in building.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12543-3:2021(Main)
Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2021)
SIST EN ISO 12543-3:2022

This document specifies performance requirements for laminated glass as defined in ISO 12543-1.
NOTE       Any defects that are found in installed laminated safety glass are dealt with in ISO 12543-6.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12543-6:2021(Main)
Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:2021)
SIST EN ISO 12543-6:2022

This document specifies defects of finished sizes and test methods with regard to the appearance of laminated glass and laminated safety glass when looking through the glass.
All references to laminated glass in this document refer to both laminated glass and laminated safety glass.
NOTE      Special attention is paid to acceptability criteria in the vision area.
This document is applicable to finished sizes at the time of supply.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12543-4:2021(Main)
Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:2021)
SIST EN ISO 12543-4:2022

This document specifies test methods relating to resistance to high temperature, humidity and radiation for laminated glass and laminated safety glass for use in building.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day