EN 12814-5:2000
(Main)Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination
Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination
This standard specifies the cutting and preparation of test specimens and the conditions for performing the macroscopic examination of the test specimens. The test is applicable to welded assemblies made from thermoplastics materials filled or unfilled, using the
following processes : - hot gas welding : round nozzle, high speed nozzle, wedge ; - extrusion welding ; - heated tool welding : butt, saddle, socket, wedge ; - electrofusion welding : socket, saddle.
Prüfen von Schweißverbindungen aus thermoplastischen Kunststoffen - Teil 5: Makroskopische Untersuchung
Diese Europäische Norm legt das Probenahmeverfahren, die Herstellung der Probekörper und die Bedingungen zur Durchführung der makroskopischen Untersuchung der Probekörper fest. Die Prüfung ist auf geschweißte Fügeteile aus thermoplastischen Kunststoffen mit oder ohne Füllstoff anwendbar, die nach folgenden Schweißverfahren hergestellt wurden: - Warmgasschweißen: Fächelschweißdüse, Ziehschweißdüse, Heizkeil; - Extrusionsschweißen; - Heizelementschweißen: Stumpfschweißen, Sattelschweißen, Muffenschweißen, Schweißen mit Heizkeil; - Heizwendelschweißen: Muffenschweißen, Sattelschweißen.
Essai des assemblages soudés sur produits semi-finis en thermoplastiques - Part 5: Examen macroscopique
La présente norme spécifie la méthode d'échantillonnage des éprouvettes, ainsi que les conditions pour effectuer l'examen macroscopique sur ces éprouvettes. L'examen est applicable à des assemblages soudés de matières thermoplastiques chargées ou non chargées, en utilisant les procédés suivants : - soudage au gaz chaud : buse ronde, buse rapide, coin chauffant ; - soudage par extrusion ; - soudage par élément chauffant : bout à bout, selle de raccordement, avec emboîtement, coin chauffant ; - soudage par électrofusion : avec emboîtement, selle de raccordement.
Preskus zvarjenih spojev plastomernih polizdelkov - 5. del: Makroskopska preiskava
General Information
- Status
- Withdrawn
- Publication Date
- 18-Jul-2000
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 249 - Plastics
- Drafting Committee
- CEN/TC 249/SC 5/WG 2 - Testing of welded joints
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 03-Dec-2025
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 31-Jan-2024
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 12814-5:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination". This standard covers: This standard specifies the cutting and preparation of test specimens and the conditions for performing the macroscopic examination of the test specimens. The test is applicable to welded assemblies made from thermoplastics materials filled or unfilled, using the following processes : - hot gas welding : round nozzle, high speed nozzle, wedge ; - extrusion welding ; - heated tool welding : butt, saddle, socket, wedge ; - electrofusion welding : socket, saddle.
This standard specifies the cutting and preparation of test specimens and the conditions for performing the macroscopic examination of the test specimens. The test is applicable to welded assemblies made from thermoplastics materials filled or unfilled, using the following processes : - hot gas welding : round nozzle, high speed nozzle, wedge ; - extrusion welding ; - heated tool welding : butt, saddle, socket, wedge ; - electrofusion welding : socket, saddle.
EN 12814-5:2000 is classified under the following ICS (International Classification for Standards) categories: 25.160.40 - Welded joints and welds. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12814-5:2000 has the following relationships with other standards: It is inter standard links to EN 12814-5:2025; is excused to EN 12814-1:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12814-5:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskus zvarjenih spojev plastomernih polizdelkov - 5. del: Makroskopska preiskavaPrüfen von Schweißverbindungen aus thermoplastischen Kunststoffen - Teil 5: Makroskopische UntersuchungEssai des assemblages soudés sur produits semi-finis en thermoplastiques - Part 5: Examen macroscopiqueTesting of welded joi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...