iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1857:2003/AC:2005

(Corrigendum)

Chimneys - Components - Concrete flue liners

Chimneys - Components - Concrete flue liners

TC - Modification to cross references in 4.2.1, replacing Figure A.3

Abgasanlagen - Bauteile - Betoninnenrohre

Conduits de fumée - Composants - Conduits intérieurs en béton

Dimniki - Sestavni deli - Betonske tuljave za dimnike

General Information

Status
Withdrawn
Publication Date
06-Dec-2005
Withdrawal Date
24-Apr-2007
ICS
91.060.40 - Chimneys, shafts, ducts
91.100.30 - Concrete and concrete products
Technical Committee
CEN/TC 166 - Chimneys
Drafting Committee
CEN/TC 166/SC 1 - Chimneys and their components with inner linings of concrete
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
25-Apr-2007
Completion Date
25-Apr-2007
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/105 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on chimneys, flues and specific products
Ref Project
SIST EN 1857:2003/AC:2006 - Chimneys - Components - Concrete flue liners

Relations

Merged Into
EN 1857:2003+A1:2008 - Chimneys - Components - Concrete flue liners
Effective Date
18-Jan-2023
Replaced By
EN 1857:2003/AC:2007 - Chimneys - Components - Concrete flue liners
Effective Date
22-Dec-2008
Corrects
EN 1857:2003 - Chimneys - Components - Concrete flue liners
Effective Date
22-Dec-2008

Buy Standard

EN 1857:2003/AC:2006EN 1857:2003/AC:2006
PreviousNext
Corrigendum
EN 1857:2003/AC:2006
English, French and German language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Chimneys - Components - Concrete flue linersDimniki - Sestavni deli - Betonske tuljave za dimnikeConduits de fumée - Composants - Conduits intérieurs en bétonAbgasanlagen - Bauteile - BetoninnenrohreTa slovenski standard je istoveten z:EN 1857:2003/AC:2005SIST EN 1857:2003/AC:2006en,fr,de91.100.3091.060.40ICS:SLOVENSKI
STANDARDSIST EN 1857:2003/AC:200601-maj-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1857:2003/ACDecember 2005Décembre 2005Dezember 2005ICS 91.060.40; 91.100.30English versionVersion FrançaiseDeutsche FassungChimneys - Components - Concrete flue linersConduits de fumée - Composants -Conduits intérieurs en bétonAbgasanlagen - Bauteile - BetoninnenrohreThis corrigendum becomes effective on 7 December 2005 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 7 décembre 2005 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 7.Dezember 2005 zur Einarbeitung in die drei offiziellen Sprachfassungender EN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1858:2008+A1:2011(Main)
Chimneys - Components - Concrete flue blocks
SIST EN 1858:2009+A1:2011

This European Standard specifies the materials, dimensional and performance requirements for precast concrete flue blocks as defined in Clause 3 for use in chimneys. The flue blocks may be of single wall or multi wall construction. The standard does not apply to flue blocks with back ventilation.
This standard does not cover products designated wet (W) in conjunction with corrosion class 3.
The standard also specifies a type of flue block to dimensionally co-ordinate with masonry unit coursing height, referred to as a type B (Bonding block).
This European Standard also applies to storey-height and flue blocks reinforced for handling.
NOTE   Any reference to the term flue blocks implies both flue blocks and their fittings, except where otherwise indicated.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12446:2011(Main)
Chimneys - Components - Concrete outer wall elements
SIST EN 12446:2011

This European Standard specifies the material, dimensional and performance requirements for factory made precast concrete outer wall elements for chimneys including outer wall fittings.
This European Standard covers elements having up to four passages designated to accommodate a combination of flue liners and/or ventilation passages.
This European Standard also relates to storey-height and reinforced outer wall elements.
This European Standard does not apply to structurally independent (freestanding or self-supporting) chimneys constructed using these outer wall elements.
NOTE   Any reference to the term "outer wall element" implies both the outer wall elements and their fittings, except where otherwise indicated.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1857:2010(Main)
Chimneys - Components - Concrete flue liners
SIST EN 1857:2010

This European Standard specifies the material, dimensional and performance requirements, including methods of test, for precast concrete flue liners and fittings with or without insulation for the construction of multi-wall chimneys.
This document does not cover:
-   high positive pressure (H) designated products;
-   products designated wet (W) in conjunction with corrosion class 3.
This document also applies to storey-height and flue liners reinforced only for handling.
NOTE 1   Any reference to the term flue liners implies both flue liners and their fittings, except where otherwise indicated.
NOTE 2   The pressure classes and corrosion classes are defined in EN 1443.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1858:2008/FprA1(Amendment)
Chimneys - Components - Concrete flue blocks
SIST EN 1858:2009/kFprA1:2011

This European Standard specifies the materials, dimensional and performance requirements for precast concrete flue blocks as defined in Clause 3 for use in chimneys. The flue blocks may be of single wall or multi wall construction. The standard does not apply to flue blocks with back ventilation. This standard does not cover products designated wet (W) in conjunction with corrosion class 3. The standard also specifies a type of flue block to dimensionally co-ordinate with masonry unit coursing height, referred to as a type B (Bonding block). This European Standard also applies to storey-height and flue blocks reinforced for handling. NOTE Any reference to the term flue blocks implies both flue blocks and their fittings, except where otherwise indicated.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1858:2008+A1:2011(Main)
Chimneys - Components - Concrete flue blocks
SIST EN 1858:2009+A1:2011

This European Standard specifies the materials, dimensional and performance requirements for precast concrete flue blocks as defined in Clause 3 for use in chimneys. The flue blocks may be of single wall or multi wall construction. The standard does not apply to flue blocks with back ventilation.
This standard does not cover products designated wet (W) in conjunction with corrosion class 3.
The standard also specifies a type of flue block to dimensionally co-ordinate with masonry unit coursing height, referred to as a type B (Bonding block).
This European Standard also applies to storey-height and flue blocks reinforced for handling.
NOTE   Any reference to the term flue blocks implies both flue blocks and their fittings, except where otherwise indicated.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12446:2011(Main)
Chimneys - Components - Concrete outer wall elements
SIST EN 12446:2011

This European Standard specifies the material, dimensional and performance requirements for factory made precast concrete outer wall elements for chimneys including outer wall fittings.
This European Standard covers elements having up to four passages designated to accommodate a combination of flue liners and/or ventilation passages.
This European Standard also relates to storey-height and reinforced outer wall elements.
This European Standard does not apply to structurally independent (freestanding or self-supporting) chimneys constructed using these outer wall elements.
NOTE   Any reference to the term "outer wall element" implies both the outer wall elements and their fittings, except where otherwise indicated.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1857:2010(Main)
Chimneys - Components - Concrete flue liners
SIST EN 1857:2010

This European Standard specifies the material, dimensional and performance requirements, including methods of test, for precast concrete flue liners and fittings with or without insulation for the construction of multi-wall chimneys.
This document does not cover:
-   high positive pressure (H) designated products;
-   products designated wet (W) in conjunction with corrosion class 3.
This document also applies to storey-height and flue liners reinforced only for handling.
NOTE 1   Any reference to the term flue liners implies both flue liners and their fittings, except where otherwise indicated.
NOTE 2   The pressure classes and corrosion classes are defined in EN 1443.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1858:2008/FprA1(Amendment)
Chimneys - Components - Concrete flue blocks
SIST EN 1858:2009/kFprA1:2011

This European Standard specifies the materials, dimensional and performance requirements for precast concrete flue blocks as defined in Clause 3 for use in chimneys. The flue blocks may be of single wall or multi wall construction. The standard does not apply to flue blocks with back ventilation. This standard does not cover products designated wet (W) in conjunction with corrosion class 3. The standard also specifies a type of flue block to dimensionally co-ordinate with masonry unit coursing height, referred to as a type B (Bonding block). This European Standard also applies to storey-height and flue blocks reinforced for handling. NOTE Any reference to the term flue blocks implies both flue blocks and their fittings, except where otherwise indicated.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17677:2024(Main)
Food processing machinery - Craft bakery and pastry depositors - Safety and hygiene requirements
kSIST FprEN 17677:2024

1.1 This document specifies safety and hygiene requirements for the design and manufacture of craft bakery and pastry depositors as described in the normative Annex A and which:
a)   are intended to be:
-   only for professional use;
-   used by one operator at a time;
-   used to deposit only pasty food (i.e.: cream, dough, batter, etc.);
-   used to deposit only on trays;
-   used as standalone machines;
-   used with manual loading of the dough into the hopper;
-   used with manual loading and unloading of the tray/s on/from the tray conveyor.
b)   can carry out only the following movements and relevant directions (see Figure 1a)):
-   Z: vertical movement of the table and/or the deposit unit;
-   X: horizontal movement of the tray conveyor;
-   Y: possible horizontal component of the movement only of the spouts themselves inside the deposit unit;
c)   are fitted with one or more hoppers whose capacity is ≤ 60 dm3 each;
d)   have a total length of the tray conveyor ≤ 1 600 mm;
e)   have a vertical movement between spouts and tray conveyor (H) ≤ 200 mm (see Figure 1c));
f)   have a deposit performance (see 3.5):
-   ≤ 60 cycles/minute with up/down movement of the table or the deposit unit;
-   ≤ 100 cycles/minute without up/down movement of the table or the deposit unit;
g)   have a trays performance (see 3.6) ≤ 4 trays/minute.
This document deals with all significant hazards, hazardous situations and events relevant to adjustment, operation and cleaning of craft bakery and pastry depositors, when they are used as intended or under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document covers requirements for the safe operation of the machine, including loading, depositing, unloading and cleaning.
1.2 The following hazards are not covered by this document:
-   hazards arising from the use of an automatic hopper loading system;
-   hazards due to packaging, handling or transport;
-   hazards arising from electromagnetic compatibility issues;
-   hazards due to dismantling and disassembling;
-   hazards due to operational stop;
-   hazards due to selection of control or operating modes;
-   hazards due to failure of the power supply;
-   hazards due to surfaces, edges or angles;
-   hazards due to uncontrolled movements;
-   hazards due to machinery maintenance.
This standard does not deal with any specific requirements on noise emitted from craft bakery and pastry depositor as the generated noise does not cause a relevant hazard.
The significant hazards covered by this document are described in Annex B.
1.3 The following machines are excluded from the scope of this document:
a)   machines which deposit pasty food by means of needles (injection);
b)   machines where the trays are put onto and/or removed from the tray conveyor automatically;
c)   machines which require a blade for the cutting system;
d)   domestic appliances;
e)   machines for industrial production;
f)   machines to deposit other products than food for bakery and pastry products.
1.4 This document is not applicable to machines which are manufactured before the date of publication of this European Standard.

  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17137:2024(Main)
Textiles and textile products - Determination of the content of compounds based on chlorobenzenes and chlorotoluenes
kSIST FprEN 17137:2024

This document specifies a test method using gas chromatography with mass selective detector (GC-MS) for detection and quantification of chlorobenzenes, chlorotoluenes, and α-chlorinated toluenes in fibres, yarns, fabrics, coated fabrics and plastics.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day