EN 1601:2014
(Main)Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)
Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)
This European Standard specifies a gas chromatographic method for the quantitative determination, in unleaded petrol having a final boiling point not greater than 220 °C, of individual organic oxygenate compounds in the range 0,17 % (m/m) to 15 % (m/m) in a direct analysis (without dilution), and total organically bound oxygen up to 3,9 % (m/m).
For samples for which one of the oxygenate compounds content is higher than 15 % (m/m), a procedure with a dilution of the sample before the analysis is given.
NOTE 1 Precision data are not available for an oxygenate compound content higher than 15 % (m/m).
NOTE 2 For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction, µ, and the volume fraction, φ.
WARNING The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Flüssige Mineralölerzeugnisse - Unverbleite Ottokraftstoffe - Bestimmung sauerstoffhaltiger organischer Verbindungen und des Gesamtgehalts an organisch gebundenem Sauerstoff mittels Gaschromatographie (O-FID)
Diese Europäische Norm legt ein direktes (ohne Verdünnung) gaschromatographisches Analysenverfahren zur quantitativen Bestimmung sauerstoffhaltiger Verbindungen im Bereich 0,17 % (m/m) bis 15 % (m/m) und des Gesamtgehaltes an organisch gebundenem Sauerstoff bis 3,9 % (m/m) in unverbleiten Ottokraftstoffen mit einem Siedeende nicht über 220 °C fest.
Für Proben, deren Gehalt an sauerstoffhaltigen Verbindungen höher als 15 % (m/m) ist, ist ein Verfahren mit der Verdünnung der Probe vor der Analyse gegeben.
ANMERKUNG 1 Präzisionsdaten für einen höheren Gehalt an sauerstoffhaltigen Verbindungen als 15 % (m/m) sind nicht verfügbar (siehe Vorwort).
ANMERKUNG 2 Für den Zweck dieser Europäischen Norm werden Massenanteil, µ, und Volumenanteil, φ, durch die Begriffe % (m/m) und % (V/V) ausgedrückt.
WARNUNG — Die Anwendung dieser Europäischen Norm kann den Einsatz gefährlicher Stoffe, Arbeitsgänge und Geräte mit sich bringen. Diese Europäische Norm gibt nicht vor, alle mit ihrer Anwendung verbundenen Sicherheitsprobleme anzusprechen. Der Anwender dieser Norm ist dafür verantwortlich, vorher angemessene Maßnahmen zu ergreifen und die Anwendbarkeit einschränkender Vorschriften zu ermitteln.
Produit pétroliers liquides - Essence sans plomb - Détermination des composés oxygénés organiques et de la teneur totale en oxygène organiquement lié par chromatographie en phase gazeuse (O-FID)
La présente Norme européenne prescrit une méthode de chromatographie en phase gazeuse pour le dosage des composés organiques oxygénés dans le domaine de 0,17 % (mlm) à 15 % (mlm) au moyen d’une analyse directe (sans dilution) et de l'oxygène total organiquement lié à une teneur maximale de 3,9 % (mlm) dans des essences sans plomb ayant un point d'ébullition final inférieur à 220 °C.
Pour les échantillons dont la teneur en oxygénés est supérieure à 15 % (m/m), une procédure de dilution de ces échantillons avant leur analyse est donnée.
NOTE 1 Les valeurs de fidélité ne sont pas disponibles pour des teneurs en composés oxygénés supérieures à
15 % (m/m).
NOTE 2 Pour les besoins du présent document, les termes «% (m/m)» et « % (V/V) » sont utilisés pour représenter la fraction massique (µ) et la fraction volumique (φ), respectivement.
AVERTISSEMENT: L'utilisation de la présente norme européenne implique l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente norme européenne n'a pas la prétention d'aborder tous les problèmes de sécurité concernés par sa mise en oeuvre. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'application des restrictions réglementaires avant utilisation.
Tekoči naftni proizvodi - Neosvinčeni motorni bencin - Določevanje organskih kisikovih spojin in celotnega organsko vezanega kisika s plinsko kromatografijo (O-FID)
Standard EN 1601 določa metodo plinske kromatografije za kvantitativno določevanje individualnih organskih kisikovih spojin v mejah od 0,17 % (m/m) do 15 % (m/m) z neposredno analizo (brez redčenja) in celotnega organsko vezanega kisika do 3,9 % (m/m) v neosvinčenem motornem bencinu, katerega končno vrelišče ne presega 220 °C. Na vzorcih, pri katerih je vsebnost ene kisikove spojine višja od 15 % (m/m), se pred analizo opravi proces redčenja.
General Information
- Status
- Withdrawn
- Publication Date
- 29-Apr-2014
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 19 - Petroleum products, lubricants and related products
- Drafting Committee
- CEN/TC 19/WG 9 - Chromatographic test methods
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 09-Aug-2017
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 07-May-2014
- Effective Date
- 16-Aug-2017
- Effective Date
- 08-Jun-2022
Frequently Asked Questions
EN 1601:2014 is a standard published by the European Committee for Standardization (CEN). Its full title is "Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)". This standard covers: This European Standard specifies a gas chromatographic method for the quantitative determination, in unleaded petrol having a final boiling point not greater than 220 °C, of individual organic oxygenate compounds in the range 0,17 % (m/m) to 15 % (m/m) in a direct analysis (without dilution), and total organically bound oxygen up to 3,9 % (m/m). For samples for which one of the oxygenate compounds content is higher than 15 % (m/m), a procedure with a dilution of the sample before the analysis is given. NOTE 1 Precision data are not available for an oxygenate compound content higher than 15 % (m/m). NOTE 2 For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction, µ, and the volume fraction, φ. WARNING The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
This European Standard specifies a gas chromatographic method for the quantitative determination, in unleaded petrol having a final boiling point not greater than 220 °C, of individual organic oxygenate compounds in the range 0,17 % (m/m) to 15 % (m/m) in a direct analysis (without dilution), and total organically bound oxygen up to 3,9 % (m/m). For samples for which one of the oxygenate compounds content is higher than 15 % (m/m), a procedure with a dilution of the sample before the analysis is given. NOTE 1 Precision data are not available for an oxygenate compound content higher than 15 % (m/m). NOTE 2 For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction, µ, and the volume fraction, φ. WARNING The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
EN 1601:2014 is classified under the following ICS (International Classification for Standards) categories: 75.160.20 - Liquid fuels. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1601:2014 has the following relationships with other standards: It is inter standard links to EN 1601:1997, EN 1601:2017, EN 1601:2014/AC:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1601:2014 is associated with the following European legislation: EU Directives/Regulations: 98/70/EC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1601:2014 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.NURPDWRJUDILMR2),'Flüssige Mineralölerzeugnisse - Unverbleite Ottokraftstoffe - Bestimmung sauerstoffhaltiger organischer Verbindungen und des Gesamtgehalts an organisch gebundenem Sauerstoff mittels Gaschromatographie (O-FID)Produit pétroliers liquides - Essence sans plomb - Détermination des composés oxygénés organiques et de la teneur totale en oxygène organiquement lié par chromatographie en phase gazeuse (O-FID)Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)75.160.20Liquid fuels71.040.50Fizikalnokemijske analitske metodePhysicochemical methods of analysisICS:Ta slovenski standard je istoveten z:EN 1601:2014SIST EN 1601:2014en,fr,de01-julij-2014SIST EN 1601:2014SLOVENSKI
STANDARDSIST EN 1601:19981DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1601
April 2014 ICS 75.160.20 Supersedes EN 1601:1997English Version
Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)
Produit pétroliers liquides - Essence sans plomb - Détermination des composés oxygénés organiques et de la teneur totale en oxygène organiquement lié par chromatographie en phase gazeuse (O-FID)
Flüssige Mineralölerzeugnisse - Unverbleite Ottokraftstoffe -Bestimmung sauerstoffhaltiger organischer Verbindungen und des Gesamtgehalts an organisch gebundenem Sauerstoff mittels Gaschromatographie (O-FID) This European Standard was approved by CEN on 18 January 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1601:2014 ESIST EN 1601:2014
Guidance on the oxygen selective detection (O-FID) technique . 15 A.1 Description . 15 A.2 Summary of the analysis conditions . 16 Bibliography . 19
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...