EN 15182-2:2019

SLOVENSKI STANDARD
01-november-2019
Nadomešča:
SIST EN 15182-2:2007+A1:2010
Prenosna oprema za črpanje in uporabo gasilnega sredstva iz gasilskih črpalk -
Gasilski ročniki - 2. del: Kombinirani ročniki PN 16
Portable equipment for projecting extinguishing agents supplied by firefighting pumps -
Hand-held branchpipes for fire service use - Part 2: Combination branchpipes PN 16
Tragbare Geräte zum Ausbringen von Löschmitteln, die mit Feuerlöschpumpen gefördert
werden - Strahlrohre für die Brandbekämpfung - Teil 2: Hohlstrahlrohre PN 16
Equipement portable de projection d’agents d’extinction alimenté par des pompes à
usage incendie - Lances à main destinées aux services d'incendie et de secours - Partie
2 : Lances combinées PN 16
Ta slovenski standard je istoveten z: EN 15182-2:2019
ICS:
13.220.10 Gašenje požara Fire-fighting
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 15182-2
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2019
EUROPÄISCHE NORM
ICS 13.220.10 Supersedes EN 15182-2:2007+A1:2009
English Version
Portable equipment for projecting extinguishing agents
supplied by firefighting pumps - Hand-held branchpipes
for fire service use - Part 2: Combination branchpipes PN
Equipement portable de projection d'agents Tragbare Geräte zum Ausbringen von Löschmitteln, die
d'extinction alimenté par des pompes à usage incendie mit Feuerlöschpumpen gefördert werden - Strahlrohre
- Lances à main destinées aux services d'incendie et de für die Brandbekämpfung - Teil 2: Hohlstrahlrohre PN
secours - Partie 2 : Lances combinées PN 16 16
This European Standard was approved by CEN on 10 June 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15182-2:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements and verification . 5
4.1 General . 5
4.2 Mechanical characteristics . 6
4.2.1 Dimensions and mass . 6
4.2.2 Operating and handling elements . 6
4.2.3 Flow adjustment positions. 7
4.2.4 Jet spray angles and adjustment positions . 7
4.3 Hydraulic characteristics . 10
4.3.1 General . 10
4.3.2 Flow rates . 10
4.3.3 Effective throw . 11
4.3.4 Pressure control test for type 4 branchpipes . 12
4.3.5 Flow control test for type 5 branchpipes. 12
4.4 Leak-tightness . 13
4.5 Hydrostatic behaviour. 13

European foreword
This document (EN 15182-2:2019) has been prepared by Technical Committee CEN/TC 192 “Fire and
rescue service equipment”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall
be withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 15182-2:2007+A1:2009.
Compared to EN 15182-2:2007+A1:2009 the following changes have been made:
— addition of new type 5 (automatic flow branchpipe) and addition of the corresponding flow control
test (see 4.3.5);
— the definitions have been updated;
— each verification has been placed under the corresponding requirement;
— a test to measure the forces needed to move the rotating elements which have detents (4.2.2) has
been added;
— the requirements for flowrates (4.3.2) have been updated;
— the verifications for leak-tightness (4.4) and hydrostatic behaviour (4.5) have been updated;
— improvement of the wording/editorial changes.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
1 Scope
In addition to the requirements given in EN 15182-1:2019, this document applies to hand-held
combination branchpipes (nozzles), with a nominal pressure of 16 bar (1,6 MPa) PN 16, with a
maximum flow rate up to 1 000 l/min at a reference pressure of 6 bar (0,6 MPa). It deals with:
— safety requirements;
— performance requirements;
— test methods.
This document applies to branchpipes as defined in Annex A of EN 15182-1:2019.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 15182-1:2019, Portable equipment for projecting extinguishing agents supplied by firefighting
pumps — Hand-held branchpipes for fire service use — Part 1: Common requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 15182-1:2019 and the
following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at http://www.iso.org/obp
3.1
combination branchpipe
branchpipe including a shut-off device and an adjustable pattern
Note 1 to entry: Branchpipe is defined in 3.1 of EN 15182-1:2019.
3.1.1
combination branchpipe – type 1
combination branchpipe with adjustable pattern at variable flow
Note 1 to entry: Changing pattern changes the flow at one given pressure.
3.1.2
combination branchpipe – type 2
combination branchpipe with adjustable pattern at fixed flow
Note 1 to entry: Changing pattern does not change the flow at one given pressure.
3.1.3
combination branchpipe – type 3
combination branchpipe with adjustable pattern at selectable fixed flow
Note 1 to entry: Changing pattern does not change the flow at one given pressure.
3.1.4
combination branchpipe – type 4
automatic pressure branchpipe
combination branchpipe with integrated pressure control device
Note 1 to entry: Changing pattern does not change the flow at one given pressure.
3.1.4.1
combination branchpipe – type 4.1
combination branchpipe with adjustable pattern at constant pressure
3.1.4.2
combination branchpipe – type 4.2
combination branchpipe with adjustable pattern and selectable flow at cons
...