iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

ENV 10080:1995

(Main)

Steel for the reinforcement of concrete weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric

Steel for the reinforcement of concrete weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric

This European Prestandard specifies requirements for the chemical composition and the mechanical and geometrical properties of weldable ribbed reinforcing steel in grade B500, categories A and B (designated as steels B500A and B500B, see table 1) used for the reinforcement of concrete structures in the form of - bars and coils or as elements for the manufacturing of welded fabric, - sheets of factory made machine welded fabric in the diameter ranges given in table 1.

Betonbewehrungsstahl - Schweißgeeigneter gerippter Betonstahl B 500 - Technische Lieferbedingungen für Stäbe, Ringe und geschweißte Matten

Diese Europäische Vornorm enthält die Anforderungen an die chemische Zusammensetzung sowie an die mechanischen und geometrischen Eigenschaften von schweißgeeignetem gerippten Betonstahl der Sorte B 500 in Kategorien A und B (entsprechend Tabelle 1 als Stähle B500A UND B500B bezeichnet), der in Form - von Stäben oder Ringen oder von Elementen zur Herstellung geschweißter Matten oder - von werksmäßig gefertigten maschinell geschweißten Matten in den Durchmesserbereichen nach Tabelle 1 für die Bewehrung von Betonbauwerken verwendet wird.

Acier pour l'armature du béton - Armatures pour béton armé soudables à verrous B 500 - Conditions techniques de livraison pour les barres, les couronnes et les treillis soudés

La présente prénorme européenne spécifie les prescriptions pour la composition chimique, les propriétés mécaniques et géométriques des armatures en acier pour béton armé soudables à verrous de nuance B 500, de catégories A et B (désignées B500A ET B500B, voir tableau 1) utilisées pour l'armature des structures en béton sous forme de: - barres et couronnes ou d'éléments constitutifs de treillis soudés, - panneaux de treillis soudés fabriqués en usine sur machine automatique, dans les gammes de diamètres données au tableau 1.

Varivo rebrasto betonsko jeklo B 500 - Tehnični dobavni pogoji za palice, svitke in varjene mreže

General Information

Status
Withdrawn
Publication Date
25-Apr-1995
Withdrawal Date
24-May-2005
ICS
77.140.60 - Steel bars and rods
Technical Committee
ECISS/TC 104 - Concrete reinforcing and prestressing steels
Drafting Committee
ECISS/TC 19/SC 1 - Reinforcing steel not for prestressing
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
25-May-2005
Completion Date
25-May-2005
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/115 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on reinforcing and prestress. steel for concrete
Ref Project
SIST ENV 10080:1997 - Steel for the reinforcement of concrete weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric

Relations

Replaced By
EN 10080:2005 - Steel for the reinforcement of concrete - Weldable reinforcing steel - General
Effective Date
22-Dec-2008

Buy Standard

ENV 10080:1997ENV 10080:1997
PreviousNext
Standardization document
ENV 10080:1997
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 10080:1997
01-maj-1997
9DULYRUHEUDVWREHWRQVNRMHNOR%7HKQLþQLGREDYQLSRJRML]DSDOLFHVYLWNHLQ
YDUMHQHPUHåH
Steel for the reinforcement of concrete weldable ribbed reinforcing steel B 500 -
Technical delivery conditions for bars, coils and welded fabric
Betonbewehrungsstahl - Schweißgeeigneter gerippter Betonstahl B 500 - Technische
Lieferbedingungen für Stäbe, Ringe und geschweißte Matten
Acier pour l'armature du béton - Armatures pour béton armé soudables a verrous B 500 -
Conditions techniques de livraison pour les barres, les couronnes et les treillis soudés
Ta slovenski standard je istoveten z: ENV 10080:1995
ICS:
77.140.15 Jekla za armiranje betona Steels for reinforcement of
concrete
SIST ENV 10080:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 10080:1997

---------------------- Page: 2 ----------------------

SIST ENV 10080:1997

---------------------- Page: 3 ----------------------

SIST ENV 10080:1997

---------------------- Page: 4 ----------------------

SIST ENV 10080:1997

---------------------- Page: 5 ----------------------

SIST ENV 10080:1997

---------------------- Page: 6 ----------------------

SIST ENV 10080:1997

---------------------- Page: 7 ----------------------

SIST ENV 10080:1997

---------------------- Page: 8 ----------------------

SIST ENV 10080:1997

---------------------- Page: 9 ----------------------

SIST ENV 10080:1997

---------------------- Page: 10 ----------------------

SIST ENV 10080:1997

---------------------- Page: 11 ----------------------

SIST ENV 10080:1997

---------------------- Page: 12 ----------------------

SIST ENV 10080:1997

---------------------- Page: 13 ----------------------

SIST ENV 10080:1997

---------------------- Page: 14 ----------------------

SIST ENV 10080:1997

---------------------- Page: 15 ----------------------

SIST ENV 10080:1997

---------------------- Page: 16 ----------------------

SIST ENV 10080:1997

---------------------- Page: 17 ----------------------

SIST ENV 10080:1997
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 10080:2005(Main)
Steel for the reinforcement of concrete - Weldable reinforcing steel - General
SIST EN 10080:2005

This document specifies general requirements and definitions for the performance characteristics of weldable reinforcing steel used for the reinforcement of concrete structures, delivered as finished products in the form of:
-   bars, coils (rod, wire) and de-coiled products;
-   sheets of factory-made machine-welded fabric;
-   lattice girders.
1.2   Steels according to this document have a ribbed, indented or smooth surface.
1.3   This document does not apply to:
-   non-weldable reinforcing steel;
-   galvanized reinforcing steel;
-   epoxy-coated reinforcing steel;
-   corrosion resistant reinforcing steel;
-   prestressing steels (see prEN 10138-1 to -4);
-   indented strip;
-   further processing, e.g. cutting or cutting and bending.

  • Standard
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10058:2018(Main)
Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
SIST EN 10058:2019

This document specifies the nominal dimensions and the tolerances on dimensions and shape of hot-rolled steel flat bars and steel wide flats for general purposes.
This document is not applicable to spring leaves, see EN 10092-1.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9443:2018(Main)
Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018)
SIST EN ISO 9443:2018

This document specifies technical delivery requirements for the surface quality of round bars, squares, hexagons and wire rod in the hot rolled condition with nominal dimensions dN from 5 mm to 200 mm. This document is applicable to bright products and tool steels, if agreed at the time of enquiry and order between manufacturer and purchaser.
By agreement between manufacturer and purchaser, this document can also be applied to other special profiles.
This document is particularly applicable to steels for engineering and structural applications.
This document does not include any requirements for the permissible depth of surface decarburization.
NOTE       The determination of depth of surface decarburization is presented in ISO 3887.
The material standards for steel bars and wire rod can exclude the application of one or other of the surface quality classes of this document. They can also cover requirements for surface quality which deviate from this document. In these cases the requirements of the material standard prevail.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10277:2018(Main)
Bright steel products - Technical delivery conditions
SIST EN 10277:2018

This document specifies the technical delivery requirements for bright steel bars in the drawn, peeled/turned or ground condition and they are intended for mechanical purposes, for example for machine parts. The bright bars are subdivided into the following steel types:
a)   non-alloy general engineering steels;
b)   non-alloy free-cutting steels;
c)   non-alloy and alloy case-hardening steels;
d)   non-alloy and alloy steels for quenching and tempering.
This document lists the mechanical characteristics for products up to 100 mm in thickness. For larger dimensions, the manufacturer and purchaser agree on mechanical properties at the time of enquiry and order.
It does not cover cold rolled products and cut lengths produced from strip or sheet by cutting. Bright steel products of stainless steels are to be found in EN 10088 3.
In addition to this document, the general technical delivery requirements of EN 10021 are applicable.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10263-5:2017(Main)
Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
SIST EN 10263-5:2018

1.1   This European Standard is applicable to round rod, round bars and wire made of stainless steels intended for cold heading and cold extrusion having a diameter up to and including:
-   25 mm for ferritic and austenitic-ferritic steels;
-   50 mm for austenitic steels;
-   100 mm for martensitic steels.
1.2   EN 10263 1 is indispensable for the application of this part of EN 10263.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10263-4:2017(Main)
Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering
SIST EN 10263-4:2018

1.1   This Part of EN 10263 is applicable to round rod and round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading, cold extrusion, subsequent quenching and tempering and induction hardening or flame hardening.
1.2   prEN 10263-1:2013 is indispensable for this Part of EN 10263.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10263-3:2017(Main)
Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
SIST EN 10263-3:2018

1.1   This Part of EN 10263 is applicable to round rod, round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion and subsequent case hardening treatment.
1.2   prEN 10263-1:2013 is indispensable for this Part of EN 10263.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10263-1:2017(Main)
Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
SIST EN 10263-1:2018

1.1   This Part of EN 10263 specifies the general technical delivery conditions for round rod, round bars and wire for cold heading and cold extrusion made of:
a)   non alloy steels not intended for heat treatment after cold working, as specified in prEN 10263-2:2013;
b)   non alloy and alloy steels for case hardening, as specified in prEN 10263-3:2013;
c)   non alloy and alloy steels for quenching and tempering, as specified in prEN 10263-4:2013;
d)   stainless steels, as specified in prEN 10263-5:2013.
1.2   Parts 2,3 and 4 of this EN 10263 cover products having a diameter up to and including 100 mm.
Part 5 covers products having a diameter up to and including:
-   25 mm for ferritic and austenitic-ferritic steels;
-   50 mm for austenitic steels;
-   100 mm for martensitic steels.
1.3   In special cases supplementary requirements or deviations with respect to this European Standard may be agreed between the purchaser and the supplier at the time of enquiry and order (See Annex A).
1.4   The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10263-2:2017(Main)
Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working
SIST EN 10263-2:2018

1.1   This Part of EN 10263 is applicable to round rod and bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion without subsequent heat treatment on the final components.
1.2   prEN 10263-1:2013 is indispensable for this Part of EN 10263.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16120-1:2017(Main)
Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017)
SIST EN ISO 16120-1:2017

ISO 16120-1:2017 series is applicable to wire rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section can be circular, oval, square, rectangular, hexagonal, octagonal, half-round or another shape, generally with at least 5 mm nominal dimension, and with a smooth surface.
ISO 16120-1:2017 specifies general requirements for non-alloy steel wire rod for conversion to wire. It is not applicable to products for which standards exist or are in development, for example:
-      steel wire rod intended for heat treatment;
-      free-cutting steel wire rod;
-      steel wire rod for cold heading and cold extrusion;
-      steel wire rod intended for the production of electrodes and products for welding;
-      steel wire rod for welded fabric for reinforcement for concrete;
-      steel wire rod for ball and roller bearings (see ISO 683‑17);
-      steel wire rod for wire for high fatigue strength mechanical springs, such as valve springs.
In addition to the requirements of this document, the general technical delivery requirements specified in ISO 404 apply.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    German language
    sale 10% off
    e-Library read for
    1 day