Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 006: Specific rules for filler metals for brazing

The EN 4500 series specifies the rules for the drafting and presentation of metallic material standards for aerospace applications. This Part 006 specifies the "Specific rules for filler metals for brazing".

Luft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die Gestaltung von Werkstoffnormen - Teil 6: Besondere Regeln für Hartlote

No Scope available

Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des normes de matériaux - Partie 006 : Règles spécifiques aux métaux d'apport de brasage

La série EN 4500 spécifie les règles pour la rédaction et la présentation des normes de matériaux métalliques pour les applications aérospatiales.
La présente Partie 006 spécifie les « Règles spécifiques aux métaux d'apport de brasage ».

Aeronavtika - Kovinski materiali - Pravila za načrtovanje in predstavljanje standardov za materiale - 6. del: Posebna pravila za kovinska polnila za spajkanje

General Information

Status
Not Published
Publication Date
18-Aug-2024
Technical Committee
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
17-Jun-2024
Completion Date
17-Jun-2024

Buy Standard

Draft
prEN 4500-006:2022
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN 4500-006:2022
01-januar-2022
Aeronavtika - Kovinski materiali - Pravila za načrtovanje in predstavljanje
standardov za materiale - 6. del: Posebna pravila za kovinska polnila za spajkanje
Aerospace series - Metallic materials - Rules for drafting and presentation of material
standards - Part 6: Specific rules for filler metals for brazing
Luft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die
Gestaltung von Werkstoffnormen - Teil 6: Besondere Regeln für Hartlote
Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation
des normes de matériaux - Partie 006: Règles spécifiques aux métaux d’apport de
brasage
Ta slovenski standard je istoveten z: prEN 4500-006
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
49.025.05 Železove zlitine na splošno Ferrous alloys in general
oSIST prEN 4500-006:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 4500-006:2022
oSIST prEN 4500-006:2022
DRAFT
EUROPEAN STANDARD
prEN 4500-006
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2021
ICS
English Version
Aerospace series - Metallic materials - Rules for drafting
and presentation of material standards - Part 6: Specific
rules for filler metals for brazing
Série aérospatiale - Matériaux métalliques - Règles Luft- und Raumfahrt - Metallische Werkstoffe - Regeln
pour la rédaction et la présentation des normes de für das Erstellen und die Gestaltung von
matériaux - Partie 006: Règles spécifiques aux métaux Werkstoffnormen - Teil 6: Besondere Regeln für
d'apport de brasage Hartlote
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4500-006:2021 E
worldwide for CEN national Members.

oSIST prEN 4500-006:2022
prEN 4500-006:2021 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Rules for drafting a European Standard for aerospace metallic materials . 6
4.1 General. 6
4.2 Title . 6
4.2.1 General. 6
4.2.2 Method of melting . 6
4.2.3 Form entries . 7
4.3 Introduction . 8
4.4 Scope, normative references, terms and definitions, requirements . 8
4.5 Table 1 (1 of 3) . 8
4.5.1 Line 1: Material designation . 8
4.5.2 Line 2: Chemical composition. 8
4.5.3 Line 3: Method of melting . 8
4.5.4 Line 4.1: Form . 8
4.5.5 Line 4.2: Method of production . 8
4.5.6 Line 4.3: Limit dimension(s) . 8
4.5.7 Line 5: Technical specification . 8
4.5.8 Line 6.1: Delivery condition and Heat treatment . 8
4.5.9 Line 6.2: Delivery condition code . 8
4.5.10 Line 7: Use condition and Heat treatment . 9
4.5.11 Line 8.1: Test sample(s) . 9
4.5.12 Line 8.2: Test piece(s) . 9
4.5.13 Line 8.3: Heat treatment . 9
4.5.14 Line 9: Dimensions concerned . 9
4.5.15 Line 10: Thickness of cladding on each face . 9
4.5.16 Line 11: Direction of test piece . 9
4.5.17 Lines 12 to 16: Tensile (T) . 9
4.5.18 Line 17: Hardness . 9
4.5.19 Line 18: Shear strength . 9
4.5.20 Line 19: Bending . 9
4.5.21 Line 20: Impact strength . 9
4.5.22 Lines 21 to 26: Creep (C) . 9
4.5.23 Line 27: Notes (see line 98) . 9
4.6 Table 1 (2 of 3) . 10
4.6.1 Line 29: Reference heat treatment . 10
4.6.2 Lines 30 to 94 . 10
4.6.3 Line 95: Marking inspection . 10
4.6.4 Line 96: Dimensional inspection . 10
4.6.5 Line 98: Notes . 10
oSIST prEN 4500-006:2022
prEN 4500-006:2021 (E)
4.6.6 Line 99: Typical use . 10
4.7 Table 1 (3 of 3) . 10
4.8 Bibliography . 10
Annex A (informative) Completion of title page . 11
A.1 Completion of title when the material does not have an ECISS designation . 11
A.2 Completion of title when the material has an ECISS designation . 11
Annex B (informative) Completion of the introduction . 12
Annex C (informative) Completion of the scope, normative references, terms and
definitions, requirements . 13
Annex D (informative) Completion of Table 1 (1 of 3) . 14
Annex E (informative) Completion of Table 1 (2 of 3) . 15
Annex F (informative) Completion of Table 1 (3 of 3) . 16
Annex G (informative) Completion of the bibliography . 17
Bibliography . 18

oSIST prEN 4500-006:2022
prEN 4500-006:2021 (E)
European foreword
This document (prEN 4500-006:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
oSIST prEN 4500-006:2022
prEN 4500-006:2021 (E)
Introduction
This document is part of the series of European metallic material standards for aerospace applications.
The general organization of this series is described in EN 4258.
The EN 4500 series (Aerospace series — Metallic materials — Rules for drafting and presentation of
material standards) is composed by the following documents:
• General rules EN 4500-001;
• Aluminium, aluminium alloys and magnesium alloys EN 4500-002;
• Heat-resisting alloys EN 4500-003;
• Titanium and titanium alloys EN 4500-004;
• Steels EN 4500-005;
• Filler metals for welding EN 4500-002 to EN 4500-005;
• Filler metals for brazing EN 4500-006.
oSIST prEN 4500-006:2022
prEN 4500-006:2021 (E)
1 Scope
The EN 4500 series specifies the rules for the drafting and presentation of metallic material standards
for aerospace applications. This Part 006 specifies the “Specific rules for filler metals for brazing”.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
FprEN 4259:2019, Aerospace series — Metallic materials — Definition of general terms
EN 4500-001, Aerospace series - Metallic materials - Rules for drafting and presentation of material
standards - Part 001: General rules
3 Terms and definitions
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.