FprEN 4500-001

SLOVENSKI STANDARD
oSIST prEN 4500-001:2022
01-februar-2022
Aeronavtika - Kovinski materiali - Pravila za načrtovanje in predstavljanje
standarov za materiale - 001. del: Splošna pravila
Aerospace series - Metallic materials - Rules for drafting and presentation of material
standards - Part 001: General rules
Luft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die
Gestaltung von Werkstoffnormen - Teil 001: Allgemeine Regeln
Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation
des normes de matériaux - Partie 001: Règles générales
Ta slovenski standard je istoveten z: prEN 4500-001
ICS:
49.025.05 Železove zlitine na splošno Ferrous alloys in general
49.025.15 Neželezove zlitine na Non-ferrous alloys in general
splošno
oSIST prEN 4500-001:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 4500-001:2022
oSIST prEN 4500-001:2022
DRAFT
EUROPEAN STANDARD
prEN 4500-001
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2021
ICS 49.025.05; 49.025.15 Will supersede EN 4500-001:2012
English Version
Aerospace series - Metallic materials - Rules for drafting
and presentation of material standards - Part 001: General
rules
Série aérospatiale - Matériaux métalliques - Règles Luft- und Raumfahrt - Metallische Werkstoffe - Regeln
pour la rédaction et la présentation des normes de für das Erstellen und die Gestaltung von
matériaux - Partie 001: Règles générales Werkstoffnormen - Teil 001: Allgemeine Regeln
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4500-001:2021 E
worldwide for CEN national Members.

oSIST prEN 4500-001:2022
prEN 4500-001:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Rules for drafting a European Standard for aerospace metallic materials . 6
4.1 Document structure . 6
4.2 Title of the material standard . 6
4.3 Introduction . 7
4.4 Scope . 7
4.5 Normative references . 7
4.6 Table 1 (1 of 3): corresponds to template 1 given in Annex A . 7
4.7 Table 1 (2 of 3): corresponds to template 2 given in Annex B . 15
4.8 Table 1 (3 of 3): corresponds to template 3 given in Annex C . 17
Annex A (normative) Template 1 . 20
Annex B (normative) Template 2 . 21
Table 1 (2 of 3) . 21
Annex C (normative) Template 3 . 22
Table 1 (3 of 3) . 22
Annex D (normative) Allocation of numbers to optional lines . 23
Bibliography . 25

oSIST prEN 4500-001:2022
prEN 4500-001:2021 (E)
European foreword
This document (prEN 4500-001:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 4500-001:2012.
oSIST prEN 4500-001:2022
prEN 4500-001:2021 (E)
Introduction
This document is part of the series of EN metallic material standards for aerospace applications. The
general organization of this series is described in EN 4258.
The EN 4500 series (Aerospace series — Metallic materials — Rules for drafting and presentation of
material standards) is composed by the following documents:
• General rules EN 4500-001;
• Aluminium, aluminium alloys and magnesium alloys EN 4500-002;
• Heat-resisting alloys EN 4500-003;
• Titanium and titanium alloys EN 4500-004;
• Steels EN 4500-005;
• Filler metals for welding EN 4500-002 to EN 4500-005;
• Filler metals for brazing EN 4500-006.
oSIST prEN 4500-001:2022
prEN 4500-001:2021 (E)
1 Scope
The EN 4500 series specifies the rules for the drafting and presentation of metallic material standards
for aerospace applications. This Part 001 specifies the “General Rules” framework valid for all parts.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
prEN 2002-001, Aerospace series — Metallic materials — Test methods — Part 001: Tensile testing at
ambient temperature
EN 2032-2, Aerospace series — Metallic materials — Part 2: Coding of metallurgical condition in delivery
condition
prEN 4258, Aerospace series — Metallic materials — General organization of standardization — links
between types of European Standards and their use
FprEN 4259, Aerospace series — Metallic materials — Definition of general terms
prEN 4500-002, Aerospace series — Metallic materials — Rules for drafting and presentation of material
standards — Part 2: Specific rules for aluminium, aluminium alloys and magnesium alloys
EN 4500-003, Aerospace series — Metallic materials — Rules for drafting and presentation of material
standards — Part 003: Specific rules for heat resisting alloys
EN 4500-004, Aerospace series — Metallic materials — Rules for drafting and presentation of material
standards — Part 004: Specific rules for titanium and titanium alloys
EN 4500-005, Aerospace series — Metallic materials — Rules for drafting and presentation of material
standards — Part 005: Specific rules for steels
prEN 4500-006, Aerospace series — Metallic materials — Rules for drafting and presentation of material
standards — Part 006: Specific rules for filler metals for brazing
ISO 80000-1, Quantities and units — Part 1: General
ISO 80000-2, Quantities and units — Part 2: Mathematics
ISO 80000-3, Quantities and units — Part 3: Space and time
ISO 80000-4, Quantities and units — Part 4: Mechanics
ISO 80000-5, Quantities and units — Part 5: Thermodynamics
ISO 80000-10, Quantities and units — Part 10: Atomic and nuclear physics
oSIST prEN 4500-001:2022
prEN 4500-001:2021 (E)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 4258 and FprEN 4259 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• ISO Online browsing platform: available at https://www.iso.org/obp
• IEC Electropedia: available at https://www.electropedia.org/
4 Rules for drafting a European Standard for aerospace metallic materials
4.1 Document structure
The document shall have the following basic structure:
• Title of the material standard;
• Introduction;
• Clause 1: Scope;
• Clause 2: Normative references;
• Clause 3: Terms and definitions;
• Clause 4: Requirements;
• Bibliography (if appropriate).
4.2 Title of the material standard
The title shall give sufficient information to unambiguously identify the semi-finished product, in the use
condition (see 4.6.13).
Consequently:
1) The same title shall not be used for different material standards;
2) Overlapping of mechanical property limits for otherwise identical material standards shall not
normally be permitted.
Each part of the title shall consist of one or several different lines:
• “Aerospace series”;
• family of metallic material, followed by the designation of the metallic material (see 4.6.2);
• method of melting (optional for aluminium and aluminium base alloys or magnesium and magnesium
base alloys);
• use condition and heat treatment;
• forms written in plural and the method of production and, if appropriate, further intended
processing;
• limiting dimensions;
oSIST prEN 4500-001:2022
prEN 4500-001:2021 (E)
• relevant mechanical property or physical property limits, if appropriate.
4.3 Introduction
This clause shall read:
• “This document is part of the series of EN metallic material standards for aerospace applications. The
general organization of this series is described in EN 4258”;
• “This document has been prepared in accordance with EN 4500-002" or “EN 4500-003” or
“EN 4500-004” or “EN 4500-005” or “EN 4500-006”.
4.4 Scope
This clause shall read: “This document specifies the requirements relating to”:
Repeat all information in the title, presented in the same format, followed by “for aerospace applications”.
If necessary, further information may be added to clarify the scope.
EXAMPLE
NOTE Other common designation used by the industry:
(insert designation),
List of designations for (material family) can be found in TR XXXX.
4.5 Normative references
This clause shall read:
“The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.”
Followed by the list of documents with their titles, to which normative reference is made in the text.
4.6 Table 1 (1 of 3): corresponds to template 1 given in Annex A
4.6.1 General
The template 1 always has a fixed content.
If there is insufficient space on a line, then:
• use notes; or
• repeat the line(s).
The relevant lines shall be completed with the pertinent requirements according to 4.6.2 to 4.6.25.
Requirements (test method, frequency of testing, sample type, test piece definition, heat treatment
condition of test piece, testing condition) that are already specified in the technical specification or the
test method standard called up by the technical specification referenced on line 5, shall not be repeated.
In such cases “According to EN XXXX” shall be written.

This Technical Report is currently in preparation.
oSIST prEN 4500-001:2022
prEN 4500-001:2021 (E)
If it is necessary to modify the requirements of the technical specification or test method, notes in the
table (see Annex A) shall be used.
A hyphen shall be marked on those lines that are not required.
Values other than those mentioned on lines 2, 12, 19, 21, 23 and 25 shall be preceded by a sign depending
on w
...