EN 14214:2008
(Main)Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods
Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods
This European Standard specifies requirements and test methods for marketed and delivered fatty acid methyl esters (hereafter known as FAME) to be used either as automotive fuel for diesel engines at 100 % concentration, or as an extender for automotive fuel for diesel engines in accordance with the requirements of EN 590. At 100 % concentration it is applicable to fuel for use in diesel engine vehicles designed or subsequently adapted to run on 100 % FAME.
NOTE For the purposes of this European Standard, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction and the volume fraction.
Kraftstoffe für Kraftfahrzeuge - Fettsäure-Methylester (FAME) für Dieselmotoren - Anforderungen und Prüfverfahren
Diese Europäische Norm legt Anforderungen und Prüfverfahren für gehandelte und ausgelieferte Fettsäure-Methylester (en: Fatty Acid Methyl Esters, FAME) für die Verwendung in Kraftfahrzeugen mit Dieselmotoren fest, entweder als Dieselkraftstoff mit einer Konzentration von 100 %, oder als Blendkomponente für Diesel-kraftstoff in Übereinstimmung mit den Anforderungen nach EN 590. Bei einer Konzentration von 100 % ist FAME einsetzbar in Fahrzeugen mit Dieselmotoren, welche für den Einsatz von 100 % FAME entwickelt oder nachträglich angepasst wurden.
ANMERKUNG In dieser Europäischen Norm werden die Symbole "% (m/m)" und "% (V/V)" verwendet, um Massen- bzw. Volumenanteile in % auszudrücken.
Carburants pour automobiles - Esters méthyliques d'acides gras (EMAG) pour moteurs diesel - Exigences et méthodes d'essais
La présente Norme européenne spécifie les exigences et méthodes d'essais applicables aux esters méthyliques
d'acides gras (dénommés EMAG par la suite), commercialisés et livrés comme carburant diesel pour automobiles,
soit à une concentration de 100 %, soit comme composant du carburant, conformément aux exigences de
l'EN 590. A la concentration de 100 %, elle est applicable aux carburants utilisés par les véhicules à moteur diesel
conçus ou adaptés pour fonctionner avec 100 % d’EMAG.
NOTE Dans le cadre de la présente Norme européenne, les termes "% (m/m)" et "% (V/V)" sont utilisés pour désigner
respectivement la fraction massique et la fraction volumique.
Goriva za motorna vozila - Metilni estri maščobnih kislin (FAME) za dizelske motorje - Zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kraftstoffe für Kraftfahrzeuge - Fettsäure-Methylester (FAME) für Dieselmotoren - Anforderungen und PrüfverfahrenCarburants pour automobiles - Esters méthyliques d'acides gras (EMAG) pour moteurs diesel - Exigences et méthodes d'essaisAutomotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods75.160.20Liquid fuelsICS:Ta slovenski standard je istoveten z:EN 14214:2008SIST EN 14214:2009en,fr,de01-februar-2009SIST EN 14214:2009SLOVENSKI
STANDARDSIST EN 14214:2003/AC:2008SIST EN 14214:2003/AC:2004SIST EN 14214:20031DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14214November 2008ICS 75.160.20Supersedes EN 14214:2003
English VersionAutomotive fuels - Fatty acid methyl esters (FAME) for dieselengines - Requirements and test methodsCarburants pour automobiles - Esters méthyliques d'acidesgras (EMAG) pour moteurs diesel - Exigences et méthodesd'essaisKraftstoffe für Kraftfahrzeuge - Fettsäure-Methylester(FAME) für Dieselmotoren - Anforderungen undPrüfverfahrenThis European Standard was approved by CEN on 25 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14214:2008: ESIST EN 14214:2009
Details of interlaboratory test programme.11 Annex B (normative)
Calculation of Iodine Value.12 Annex C (normative)
Correction factor for calculation of density of FAME.14 Bibliography.15
a note referring to good house keeping via CEN/TR 15367-1; a note to clarify that cold flow requirements of fatty acid methyl esters (FAME) when used as an extender for diesel according to EN 590 (as set out in Table 2) do not apply; a general update of the revised test methods, some of them already having been included in the Technical Corrigendum to the previous version. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.