Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification

This document specifies requirements for four types of thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for carrying hydrocarbons, solvents and chemicals. It specifies bore sizes from 25 mm to 300 mm, working pressures from 4 bar ) to 14 bar and working temperatures from −30 °C to 150 °C.
Type 1 hoses are suitable for vapour applications. Types 2 to 4 hoses are suitable for liquid applications.
NOTE 1   The attention of users is drawn to Annex A concerning the selection of the material for the inner wall of layers and any polymeric coating of the internal wire helix related to the chemical(s) to be conveyed by the hoses and/or hose assemblies.
This document does not apply to hoses and hose assemblies for:
Aircraft ground fuelling and defuelling   (EN ISO 1825);
Fuel dispensing   (EN 1360);
Oil burners   (EN ISO 6806);
Liquefied petroleum gas and liquefied natural gas   (EN 13766);
Fire fighting   (EN ISO 14557);
Offshore liquefied natural gas   (EN 1474-2);
Refrigeration circuits   (-).

Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für die Förderung von Kohlenwasserstoffen, Lösungsmitteln und Chemikalien - Spezifikation

Dieses Dokument legt Anforderungen für vier Typen thermoplastischer, mehrlagiger (nicht vulkanisierter) Schläuche und Schlauchleitungen zur Förderung von Kohlenwasserstoffen, Lösungsmitteln und Chemikalien fest. Es legt Bohrungsdurchmesser von 25 mm bis 300 mm, Betriebsdrücke von 4 bar ) bis 14 bar und Betriebstemperaturen von -30 °C bis 150 °C fest.
Der Schlauchtyp 1 ist geeignet für die Anwendung mit Gas. Die Schlauchtypen 2 bis 4 sind für Anwendungen mit Flüssigkeit geeignet.
ANMERKUNG 1   Der Anwender wird auf Anhang A verwiesen, der die Werkstoffauswahl für die Innenwände der Lagen und der polymeren Überzüge der inneren Drahtwendel bezüglich der durch die Schläuche und/oder Schlauchleitungen zu fördernden Chemikalien betrifft.
Dieses Dokument gilt nicht für Schläuche und Schlauchleitungen für:
Bodenbetankung und Entleerung von Flugzeugen   (EN ISO 1825);
Zapfstellenschläuche   (EN 1360);
Ölbrenner   (EN ISO 6806);
Flüssiggas und Flüssigerdgas   (EN 13766);
Feuerwehrschläuche   (EN ISO 14557);
Offshore-Flüssigerdgas   (EN 1474-2);
Kühlkreisläufe   (-).

Tuyaux et flexibles thermoplastique multicouches (non vulcanisés) pour le dépotage d'hydrocarbures, solvants et produits chimiques - Spécification

Le présent document spécifie les exigences relatives à quatre types de tuyaux et flexibles thermoplastique multicouches (non vulcanisés) utilisés pour le transport d’hydrocarbures, de solvants et de produits chimiques. Elle spécifie des diamètres de passage compris entre 25 mm et 300 mm, des pressions de service comprises entre 4 bar 1)  et 14 bar et des températures d’utilisation comprises entre - 30 °C et 150 °C.
Les tuyaux de type 1 conviennent à l’utilisation de la vapeur. Les tuyaux de types 2 à 4 conviennent à l’utilisation de liquides.
NOTE 1   L’attention des utilisateurs est attirée sur l’Annexe A concernant le choix du matériau du revêtement intérieur des couches et de tout revêtement polymère de l’hélice intérieure en contact avec le(s) produit(s) chimique(s) à transporter dans les tuyaux et/ou flexibles.
Le présent document ne s’applique pas aux tuyaux et aux flexibles destinés :
Au ravitaillement en carburant des avions   (EN ISO 1825) ;
À la livraison de carburant   (EN 1360) ;
Aux brûleurs à fuel   (EN ISO 6806) ;
Aux gaz de pétrole liquéfiés et au gaz naturel liquéfié   (EN 13766) ;
À la lutte contre l’incendie   (EN ISO 14557) ;
Au gaz naturel liquéfié en mer   (EN 1474-2) ;
Aux circuits réfrigérants.   (-).

Plastomerne večslojne (nevulkanizirane) cevi in cevni priključki za pretok ogljikovodikov, topil in kemikalij - Specifikacija

Ta evropski standard določa zahteve za štiri vrste plastomernih večslojnih (nevulkaniziranih) cevi ter cevnih priključkov za pretok ogljikovodikov, topil in kemikalij. Določa velikosti premera cevi od 25 mm do 300 mm, delovni tlak od 4 bar do 14 bar in delovno temperaturo od ˜–30 °C do 150 °C.
Cevi tipa 1 so primerne za uporabo s paro. Cevi tipa 2–4 so primerne za uporabo s tekočino.
OPOMBA 1: Uporabnike je treba opozoriti na dodatek A, ki obravnava izbiro materiala za notranje sloje sten in morebitne polimerne prevleke notranje žične vijačnice v povezavi s kemikalijami, ki se bodo pretakale skozi cevi in/ali cevne priključke.
Glede uporabe s polimeri prevlečene notranje žice skupaj z ogljikovodiki ali kemikalijami z nizko prevodnostjo se je treba posvetovati s proizvajalcem.
Ta evropski standard se ne uporablja za cevi in cevne priključke za:
pretakanje in praznjenje goriv letal na tleh (EN ISO 1825);
točenje goriv   (EN 1360);
oljne gorilnike   (EN ISO 6806);
utekočinjeni naftni plin in utekočinjeni zemeljski plin (EN 13766);
gašenje požara   (EN ISO 14775);
utekočinjeni zemeljski plin na morju (EN 1474-2);
hladilne krogotoke.

General Information

Status
Published
Publication Date
26-Jun-2018
Withdrawal Date
30-Dec-2018
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Dec-2023
Completion Date
02-Dec-2023

Relations

Buy Standard

Standard
EN 13765:2018 - BARVE
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 13765:2017 - BARVE
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für die Förderung von Kohlenwasserstoffen, Lösungsmitteln und Chemikalien - SpezifikationTuyaux et flexibles thermoplastique multicouches (non vulcanisés) pour le dépotage d'hydrocarbures, solvants et produits chimiques - SpécificationThermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification83.140.40Gumene ceviHosesICS:Ta slovenski standard je istoveten z:EN 13765:2018SIST EN 13765:2018en,fr,de01-oktober-2018SIST EN 13765:2018SLOVENSKI
STANDARDSIST EN 13765:2011+A1:20151DGRPHãþD



SIST EN 13765:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13765
June
t r s z ICS
t uä r v rä y r Supersedes EN
s u y x wã t r s r ªA sã t r s wEnglish Version
hose assemblies for the transfer of hydrocarbonsá solvents and chemicals æ Specification et produits chimiques æ Spécification Schläuche und Schlauchleitungen für die Förderung von Kohlenwasserstoffená Lösungsmitteln und Chemikalien æ Spezifikation This European Standard was approved by CEN on
t u February
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u y x wã t r s z ESIST EN 13765:2018



EN 13765:2018 (E) 2 Contents Page European foreword . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 6 4 Classification . 6 5 Materials and construction . 7 5.1 General . 7 5.2 Internal and external wire . 7 6 Dimensions . 8 6.1 Internal diameters, with tolerances and minimum bend radii . 8 6.2 Tolerance on length. 8 7 Performance requirements of hoses and hose assemblies . 8 7.1 Cover . 8 7.2 Hoses . 9 7.3 End fittings . 9 7.4 Hose assemblies.
...

SLOVENSKI STANDARD
oSIST prEN 13765:2017
01-januar-2017
3ODVWRPHUQHYHþVORMQH QHYXONDQL]LUDQH FHYLLQFHYQLSULNOMXþNL]DSUHWRN
RJOMLNRYRGLNRYWRSLOLQNHPLNDOLM6SHFLILNDFLMD
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of
hydrocarbons, solvents and chemicals - Specification
Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für
die Förderung von Kohlenwasserstoffen, Lösungsmitteln und Chemikalien - Spezifikation
Tuyaux et flexibles thermoplastique multicouches (non vulcanisés) pour le dépotage
d'hydrocarbures, solvants et produits chimiques - Spécification
Ta slovenski standard je istoveten z: prEN 13765
ICS:
83.140.40 Gumene cevi Hoses
oSIST prEN 13765:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13765:2017

---------------------- Page: 2 ----------------------
oSIST prEN 13765:2017


DRAFT
EUROPEAN STANDARD
prEN 13765
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2016
ICS 23.040.70 Will supersede EN 13765:2010+A1:2015
English Version

Thermoplastic multi-layer (non-vulcanized) hoses and
hose assemblies for the transfer of hydrocarbons, solvents
and chemicals - Specification
Tuyaux et flexibles thermoplastique multicouches (non Thermoplastische, mehrlagige (nicht vulkanisierte)
vulcanisés) pour le dépotage d'hydrocarbures, solvants Schläuche und Schlauchleitungen für die Förderung
et produits chimiques - Spécification von Kohlenwasserstoffen, Lösungsmitteln und
Chemikalien - Spezifikation
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 218.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13765:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13765:2017
prEN 13765:2016 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Classification . 6
5 Materials and construction . 6
5.1 General . 6
5.2 Internal and external wire . 7
6 Dimensions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.