EN 1123-1:1999
(Main)Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
This standard specifies requirements, tests and quality control for longitudinally welded, hot-dip galvanized steel pipes and fittings with spigot and socket for use in waste water systems usually operating under gravity or at a low head of pressure. For the purposes of this standard, components are pipes, fittings, joints and seals. This standard is for components used for the discharge of: - domestic waste water; - surface water and - groundwater.
Rohre und Formstücke aus längsnahtgeschweißtem, feuerverzinktem Stahlrohr mit Steckmuffe für Abwasserleitungen - Teil 1: Anforderungen, Prüfungen, Güteüberwachung
Diese Norm legt die Anforderungen, Prüfungen und die Güteüberwachung für Rohre und Formstücke mit Steckmuffe aus längsnahtgeschweißtem, feuerverzinktem Stahlrohr zum Bau von Abwasserleitungen, die in der Regel drucklos betrieben werden, fest. Bauteile im Sinne dieser Norm sind Rohre, Formstücke, Rohrverbindungen und Dichtmittel. Diese Norm gilt für Bauteile, die für das Ableiten von - häuslichem Abwasser; - Oberflächenwasser und - Grundwasser verwendet werden.
Tubes et raccords de tube soudés longitudinalement en acier galvanisé à chaud, à manchon enfichable pour réseaux d'assainissement - Partie 1: Prescriptions, essais, contrôle de qualité
La présente norme a pour but de définir les prescriptions, essais et contrôle qualité des tubes et raccords à manchon enfichable en acier galvanisés à chaud, soudés longitudinalement, pour les réseaux d'assainissement fonctionnant par gravité ou sous faible pression. Pour les besoins de la présente norme, les éléments sont des tubes, des raccords, des joints et des garnitures d'étanchéité. Cette norme s'applique à des éléments utilisés pour l'évacuation: - des eaux usées domestiques; - des eaux de surface; - des eaux souterraines.
Vzdolžno varjene jeklene cevi in spojniki, vroče galvanizirani, z obojko, za sisteme za odpadno vodo - 1. del: Zahteve, preskušanje in kontrola kakovosti
General Information
Relations
Overview
EN 1123-1:1999 is a CEN standard that specifies the requirements, testing and quality control for longitudinally welded, hot-dip galvanized steel pipes and fittings with spigot and socket intended for use in external wastewater systems. The standard covers components including pipes, fittings, joints and seals used for the discharge of domestic wastewater, surface water and groundwater, typically operating under gravity or at low head pressures.
Key Topics
- Scope and component definitions - clarifies which pipes, fittings and joint types (spigot and socket) are covered and the intended wastewater applications.
- Material and coating requirements - sets expectations for the steel and hot-dip galvanizing to ensure corrosion resistance appropriate for wastewater environments.
- Dimensional and mechanical requirements - addresses geometry, tolerances and mechanical properties necessary for reliable installation and service (pipes and fittings manufactured by longitudinal welding).
- Testing and inspection - requires testing regimes and inspection methods to verify compliance (e.g., dimensional checks, visual/coating assessments, joint/seal performance and basic mechanical tests).
- Quality control - defines manufacturer quality control procedures, documentation and traceability to ensure consistent production and long-term durability.
- Performance in service conditions - focuses on suitability for gravity flow and low-pressure wastewater systems rather than high-pressure or specialty industrial applications.
Applications
EN 1123-1 is intended for use in:
- Municipal and civil external sewage and drainage networks
- Stormwater and surface water conveyance systems
- Groundwater drainage and related subsurface disposal works
- Projects where longitudinally welded, hot-dip galvanized spigot-and-socket pipes are specified for corrosion-resistant, low-pressure wastewater conveyance
Typical users:
- Pipe and fittings manufacturers seeking compliance and market access in Europe
- Civil and municipal engineers and specifiers writing procurement or construction specs
- Contractors and installers selecting appropriate pipe systems for external sewage works
- Quality inspectors and testing laboratories performing compliance verification
- Authorities and asset owners managing public drainage networks
Related Standards
- EN 1123-1 forms part of a broader set of standards for wastewater pipe systems; users should also consult other EN standards and relevant national standards for complementary requirements (joint types, testing methods, installation practices and system design).
Keywords: EN 1123-1, hot-dip galvanized steel pipes, longitudinally welded, spigot and socket, wastewater systems, testing, quality control, pipe fittings.
Frequently Asked Questions
EN 1123-1:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control". This standard covers: This standard specifies requirements, tests and quality control for longitudinally welded, hot-dip galvanized steel pipes and fittings with spigot and socket for use in waste water systems usually operating under gravity or at a low head of pressure. For the purposes of this standard, components are pipes, fittings, joints and seals. This standard is for components used for the discharge of: - domestic waste water; - surface water and - groundwater.
This standard specifies requirements, tests and quality control for longitudinally welded, hot-dip galvanized steel pipes and fittings with spigot and socket for use in waste water systems usually operating under gravity or at a low head of pressure. For the purposes of this standard, components are pipes, fittings, joints and seals. This standard is for components used for the discharge of: - domestic waste water; - surface water and - groundwater.
EN 1123-1:1999 is classified under the following ICS (International Classification for Standards) categories: 23.040.05 - Pipeline and its parts for external sewage systems; 23.040.10 - Iron and steel pipes; 23.040.40 - Metal fittings; 23.040.60 - Flanges, couplings and joints. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1123-1:1999 has the following relationships with other standards: It is inter standard links to EN 1123-1:1999/A1:2004; is excused to EN 1123-2:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1123-1:1999 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC, 93/38/EEC; Standardization Mandates: M/BC/CEN/88/15. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 1123-1:1999 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VWLRohre und Formstücke aus längsnahtgeschweißtem, feuerverzinktem Stahlrohr mit Steckmuffe für Abwasserleitungen - Teil 1: Anforderungen, Prüfungen, GüteüberwachungTubes et raccords de tube soudés longitudinalement en acier galvanisé a chaud, a manchon enfichable pour réseaux d'assainissement - Partie 1: Prescriptions, essais, contrôle de qualitéPipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control93.030Zunanji sistemi za odpadno vodoExternal sewage systems77.140.75Jeklene cevi in cevni profili za po
...
The article discusses the EN 1123-1:1999 standard, which outlines the requirements, testing procedures, and quality control measures for longitudinally welded, hot-dip galvanized steel pipes and fittings with spigot and socket. These components are typically used in waste water systems that operate under gravity or low pressure. The standard applies to pipes, fittings, joints, and seals used for the discharge of domestic waste water, surface water, and groundwater.
기사 제목: EN 1123-1:1999 - 압로 접합 및 소켓이 있는 핫-딥 아연 도금 강관과 피팅들을 위한 폐수 시스템의 요구 사항, 테스트, 품질 통제를 다루는 부분 1 기사 내용: 이 표준은 폐수 시스템에서 일반적으로 중력 또는 낮은 압력 하에서 작동하는 압로 접합 및 소켓과 함께 사용되는 핫-딥 아연 도금 강관과 피팅들에 대한 요구 사항, 테스트 및 품질 통제를 명시합니다. 이 표준에 따르면 구성 요소는 파이프, 피팅, 접합부 및 밀봉재입니다. 이 표준은 가정 폐수, 표면 수 및 지하수의 배출을 위해 사용되는 구성 요소들을 위한 것입니다.
記事タイトル：EN 1123-1:1999 - スプークトとソケットを備えた長手方向溶接された亜鉛めっき鋼管と継手を使用する排水システムの要件、試験、品質管理について- 第1部：要件、試験、品質管理 記事の内容：この規格は、通常重力または低圧下で稼働する排水システムで使用するスプークトとソケットを備えた長手方向溶接された亜鉛めっき鋼管と継手の要件、試験、品質管理を明示しています。この規格では、コンポーネントとしてパイプ、継手、接合部、シールが挙げられます。この規格は、家庭の廃水、地表水、地下水の排出に使用されるコンポーネントに適用されます。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...