iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 3-8:2006/AC:2007

(Corrigendum)

Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar

Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar

TC - Deletion of footnote to text 2) as EN 3-3 is still valid and has not been replaced by EN 3-8 and EN 3-9 as stated

Tragbare Feuerlöscher - Teil 8: Zusätzliche Anforderungen zu EN 3-7 an die konstruktive Ausführung, Druckfestigkeit, mechanische Prüfungen für tragbare Feuerlöscher mit einem maximal zulässigen Druck kleiner gleich 30 bar

Extincteurs d'incendie portatifs - Partie 8: Exigences additionnelles à l'EN 3-7 pour la construction, la résistance à la pression et les essais mécaniques pour extincteurs dont la pression maximale admissible est inférieure ou égale à 30 bar

Prenosni gasilniki - 8. del: Dodatne zahteve k EN 3-7 za konstrukcijo, odpornost proti tlaku in mehanski preskusi za gasilnike z največjim dovoljenim tlakom, enakim ali nižjim od 30 bar - Popravek AC

General Information

Status
Withdrawn
Publication Date
16-Oct-2007
Withdrawal Date
17-Aug-2021
ICS
13.220.10 - Fire-fighting
Technical Committee
CEN/TC 70 - Manual means of fire fighting equipment
Drafting Committee
CEN/TC 70 - Manual means of fire fighting equipment
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
18-Aug-2021
Directive
2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
2014/90/EU - Directive 2014/90/EU of the European Parliament and of the Council of 23 July 2014 on marine equipment and repealing Council Directive 96/98/EC
94/55/EC - Transport of dangerous goods by road
96/49/EC - Transport of dangerous goods by rail
96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
96/98/EC - Marine equipment
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
Ref Project
SIST EN 3-8:2007/AC:2008 - Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar

Relations

Replaced By
EN 3-8:2021 - Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7
Effective Date
25-Aug-2021
Corrects
EN 3-8:2006 - Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
Effective Date
08-Jun-2022

Buy Standard

EN 3-8:2007/AC:2008EN 3-8:2007/AC:2008
PreviousNext
Corrigendum
EN 3-8:2007/AC:2008
English, French and German language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 barExtincteurs d'incendie portatifs - Partie 8: Exigences additionnelles à l'EN 3-7 pour la construction, la résistance à la pression et les essais mécaniques pour extincteurs dont la pression maximale admissible est inférieure ou égale à 30 barTragbare Feuerlöscher - Teil 8: Zusätzliche Anforderungen zu EN 3-7 an die konstruktive Ausführung, Druckfestigkeit, mechanische Prüfungen für tragbare Feuerlöscher mit einem maximal zulässigen Druck kleiner gleich 30 barTa slovenski standard je istoveten z:EN 3-8:2006/AC:2007SIST EN 3-8:2007/AC:2008en,fr,de13.220.10ICS:SLOVENSKI
STANDARDSIST EN 3-8:2007/AC:200801-februar-2008

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3-8:2006/ACOctober 2007Octobre 2007Oktober 2007ICS 13.220.10English versionVersion FrançaiseDeutsche FassungPortable fire extinguishers - Part 8: Additional requirements to EN 3-7 forthe construction, resistance to pressure and mechanical tests forextinguishers with a maximum allowable pressure equal to or lower than 30barExtincteurs d'incendie portatifs - Partie 8:Exigences additionnelles à l'EN 3-7 pour laconstruction, la résistance à la pression etles essais mécaniques pour extincteursdont la pression maximale admissible estinférieure ou égale à 30 barTragbare Feuerlöscher - Teil 8: ZusätzlicheAnforderungen zu EN 3-7 an diekonstruktive Ausführung, Druckfestigkeit,mechanische Prüfungen f
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16856:2020(Main)
Portable aerosol dispensers for fire extinguishing purposes
SIST EN 16856:2020

This draft European Standard specifies the characteristics, performance and test methods for extinguishing aerosol dispensers, in accordance with Directive 75/324/EEC, for fire extinguishing purposes. Requirements in this draft Standard are specified for products containing less than 1 kg or 1 l of extinguishing media, which can be expelled by the action of internal pressure and are intended to extinguish test fires of type A + B, or type A + F, or type A + B + F classes of EN 2. These extinguishing aerosol dispensers are intended to be used by untrained persons for domestic applications. They are not intended to be used on gas fires (class C) and metal fires (class D).
Requirements are specified for minimum performance in Annex I for extinguishing test fires of type A, type B and type F classes of EN 2, as appropriate.
Annex A gives the conditioning treatment to be applied to extinguishing aerosol dispensers prior to testing as described in Annex B to Annex K.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1869:2019(Main)
Fire blankets
SIST EN 1869:2019

This document specifies requirements for fire blankets which are not reusable and that are intended for use by one person.
It specifies requirements for fire blankets usable to control small fires. It also limits the risk of electric shock in case of unintentional use on live electrical equipment.
Fire blankets that are large enough are considered suitable to be used for smothering persons whose clothes are on fire.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1866-2:2014(Main)
Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
SIST EN 1866-2:2014

This European Standard specifies the rules of design, type testing, manufacturing and inspection during manufacturing of mobile fire extinguishers with metallic bodies, which comply with the requirements of EN 1866 1, as far as pressure resistance is concerned.
This part applies to mobile fire extinguishers of which the maximum allowable pressure PS is lower than or equal to 30 bar and containing non-explosive, non-flammable, non-toxic and non-oxidizing fluids or powder.
This European Standard does not apply to carbon dioxide fire extinguishers.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1866-3:2013(Main)
Mobile fire extinguishers - Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-1
SIST EN 1866-3:2013

This European Standard specifies the rules of design, assembling, testing and inspection during manufacturing of mobile CO2 fire extinguishers, which comply with the requirements of EN 1866-1, as far as pressure resistance is concerned.
NOTE 1   Design is limited to design of the assembly.
NOTE 2   The classification of the different parts forming the assembly is given in Annex A.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 15642:2011(Main)
Unified tests procedures for the tests of EN 3-7:2004+A1:2007
SIST-TP CEN/TR 15642:2011

This Technical Report specifies the tests procedures for some of the tests required by EN 3-7:2004+A1:2007; it does not cover all the EN 3-7:2004+A1:2007 tests but only the tests requiring more precision in their execution.
These Unified Tests Procedures are in force for all laboratories performing EN 3-7:2004+A1:2007 tests. Those laboratories should be accredited to EN ISO/IEC 17025 for EN 3-7:2004+A1:2007 tests and their accreditation shall be done by an Accreditation Body, member of the European Accreditation.
This document should be included in the list of applicable documents.
NOTE   Since results of many tests may be affected by the human factor, this document should be taken as a helpful tool but will not replace experience and knowledge of people.”

  • Technical report
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3-10:2009(Main)
Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7
SIST EN 3-10:2010

This European Standard specifies the minimum requirements for attesting the conformity of portable fire extinguishers to EN 3-7, as well as the requirements for the quality and production control of the fire extinguishers.
It specifies the documentation to be provided regarding:
-   identification of the applicant;
-   identification of the manufacturer, if not the applicant;
-   identification of subcontractor(s), if applicable;
-   identification of the extinguisher;
-   documents provided with the extinguisher;
-   CE marking;
-   quality management system;
-   extinguishing media toxicological information.
It specifies methods for:
-   type testing;
-   factory assessment;
-   controls during production.
NOTE 1   A test report and a satisfactory audit supporting documentation could form the basis for an applicant to request a certification of his product from an EA accredited certification body. Additional requirements can be made by national regulations and/or quality marks.
NOTE 2   Where appropriate, component family testing could be applied.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4649:2009(Main)
Aerospace series - Handheld fire extinguishers with synthesis gases, for aircraft use - Technical specification and qualification conditions
SIST EN 4649:2009

This standard specifies the technical requirements and qualification conditions for handheld fire extinguishers made with metal vessels and using synthesis gases for aircraft use, designed for use in the cockpit, in the passenger cabin and to protect areas accessible to the crew.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3-9:2006/AC:2007(Corrigendum)
Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers
SIST EN 3-9:2007/AC:2008

TC - Deletion of footnote to text 2) as EN 3-3 is still valid and has not been replaced by EN 3-8 and EN 3-9 as stated

  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3-7:2004+A1:2007(Main)
Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods
SIST EN 3-7:2004+A1:2008

This standard specifies the characteristics, performance requirements and test methods for portable fire extinguishers.
Reference to the suitability of an extinguisher for use on gaseous fires (class C fires) are at the manufacturer’s discretion, but are applied only to powder type extinguishers which have gained a class B or class A and class B rating.
Suitability of extinguishers for use on class D fires (fires involving flammable metals) is outside the scope of this standard in respect of test fires. However, extinguishers claiming class D suitability are covered in all other respects by the requirements in this standard for powder extinguishers.
It is considered hazardous for powder and carbon dioxide fire extinguishers to be used on Class F fires.  For this reason powder and carbon dioxide fire extinguishers are excluded for conformance with regard to Class F in this European Standard.
NOTE   The extinction of a metal fire presents a situation so specific (in terms of the metal itself, its form, the configuration of the fire etc.) that it is not possible to define a representative standard fire for the purposes of testing. The efficiency of extinguishers on class D fires needs to be established on a case by case basis.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1866-1:2007(Main)
Mobile fire extinguishers - Part 1: Characteristics, performance and test methods
SIST EN 1866-1:2008

This European Standard specifies the rules of design, type testing and inspection during manufacturing, ratings and classification of mobile fire extinguishers and test methods to be used. It applies to mobile fire extinguishers with a total mass above 20 kg for powder, water based and CO2 extinguishers. This standard applies to mobile fire extinguishers that are manoeuvred by an operator on foot only.
It does not cover fire tests for class C and class F fires, but the used extinguishing media can be effective on these types of fire. Class D fires are considered to be a very specialist application and are not included in this standard, but may be made the object of national specification.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day