EN 12929-2:2004

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheitsanforderungen für Seilbahnen für den Personenverkehr - Allgemeine Bestimmungen - Teil 2: Ergänzende Anforderungen für Zweiseil - Pendelbahnen ohne TragseilbremsePrescriptions de sécurité pour les installations a câbles transportant des personnes - Dispositions générales - Partie 2: Prescriptions complémentaires pour les téléphériques bicâbles a va et vient sans frein de chariotSafety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes45.100Cableway equipmentICS:Ta slovenski standard je istoveten z:EN 12929-2:2004SIST EN 12929-2:2005en01-januar-2005SIST EN 12929-2:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12929-2October 2004ICS 45.100 English versionSafety requirements for cableway installations designed to carrypersons - General requirements - Part 2: Additionalrequirements for reversible bicable aerial ropeways withoutcarrier truck brakesPrescriptions de sécurité pour les installations à câblestransportant des personnes - Dispositions générales -Partie 2: Prescriptions complémentaires pour lestéléphériques bicâbles à va et vient sans frein de chariotSicherheitsanforderungen für Seilbahnen für denPersonenverkehr - Allgemeine Bestimmungen - Teil 2:Ergänzende Anforderungen für Zweiseil - Pendelbahnenohne TragseilbremseThis European Standard was approved by CEN on 23 August 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12929-2:2004: E

A–deviations.14 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2000/9/EC relative to cableway installations designed to carry persons.15

This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 12929 with the generic title "Safety requirements for cable way installations designed to carry persons - General requirements", is in two parts:  Part 1: Requirements for all installations  Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes This document forms part of the standards programme approved by the CEN Technical Board on safety requirements for cableway installations designed to carry persons: 1) Safety requirements for cableway installations designed to carry persons – Terminology. 2) Safety requirements for cableway installations designed to carry persons - General requirements. 3) Safety requirements for cableway installations designed to carry persons – Calculations. 4) Safety requirements for cableway installations designed to carry persons - Ropes. 5) Safety requirements for cableway installations designed to carry persons - Tensioning devices. 6) Safety requirements for cableway installations designed to carry persons – Drive systems and other mechanical equipment. 7) Safety requirements for cableway installations designed to carry persons - Carriers. 8) Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems. 9) Safety requirements for cableway installations designed to carry persons - Civil engineering works. 10) Safety requirements for cableway installations designed to carry persons – Pre-commissioning inspection, maintenance and operational inspection and checks. 11) Safety requirements for cableway installations designed to carry persons – Recovery and evacuation. 12) Safety requirements for cableway installations designed to carry persons - Operation. 13) Safety requirements for cableway installations designed to carry persons - Quality assurance.

For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1709, Safety requirements for cableway installations designed to carry persons – Pre-commissioning inspection, maintenance and operational inspection and checks
prEN 1907:2004, Safety requirements for cableway installations designed to carry persons - Terminology. EN 1908, Safety requirements for cableway installations designed to carry persons – Tensionning devices. EN 1909, Safety requirements for cableway installations designed to carry persons – Recovery and evacuation. EN 12397, Safety requirements for cableway installations designed to carry persons – Operation. EN 12408, Safety requirements for cableway installations designed to carry persons – Quality assurance. EN 12927-1, Safety requirements for cableway installations designed to carry persons – Ropes – Part 1: Selection criteria for ropes and their end fixings. EN 12927-2, Safety requirements for cableway installations designed to carry persons – Ropes – Part 2: Safety coefficients. EN 12927-3, Safety requirements for cableway installations designed to carry persons – Ropes – Part 3: Splicing of haul ropes, carrying hauling ropes and 6 strand towing ropes. EN 12927-4, Safety requirements for cableway installations designed to carry persons – Ropes – Part 4: End fixings. EN 12927-5, Safety requirements for passenger transportation by rope – Ropes – Part 5: Storage, transportation, installation and tensioning. EN 12927-6, Safety requirements for cableway installations designed to carry persons – Ropes – Part 6: Discard criteria. EN 12927-7, Safety requirements for cableway installations designed to carry persons – Ropes – Part 7: Inspection, repair and maintenance.

Failure of support system for haul rope loop EN 13223 Effect of aircraft EN 12929-1 Wind-up of haul rope
Damage to haul rope due to atmospheric influences (e.g. lightning, corrosion) EN 13243 Table 2 — Events during operation which may represent a hazard when there is no carrier truck brake, even though the haul rope loop remains intact Hazard scenario Other relevant standards Failure of attachment of carrier to haul rope prEN 13796-1 Failure of entry monitoring EN 13243 Loss of adhesion to drive sheave EN 12929-1, EN 12930, EN 13223 Derailment of carrier when stationary in extreme operating conditions prEN 13796-1 Obstacle on line
Obstacle in station area EN 13223 Movement of carrier during an evacuation procedure
Wind-up of haul rope
Problems during correction of haul rope overlap
5.2.3 Safety measures This document contains the measures required to avoid or limit the hazard scenarios listed in 5.2.2.

EN 12929-2:2
...