CEN/TC 242/WG 2 - General requirements and calculations

This European Standard specifies additional safety requirements for bicable reversible aerial ropeways without carrier truck brakes. This document is applicable to the various types of cableway installations and takes into account their environment.
This Part of the EN 12929 contains:
- additional requirements relating to the integrity of the haul rope loop;
- additional requirements intended to prevent specific operational incidents;
- requirements concerning the attachment of the carriers to the haul rope.
This European Standard does not apply to cableway installations for transportation of goods nor to lifts.

This document specifies the general safety requirements applicable to the calculations for cableway installations designed to carry persons. This document is applicable to the various types of cableway installations and takes into account their environment.
This document contains:
-   general requirements for calculations and their presentation;
-   general requirements relating to the actions to be taken into account in the calculation of components as a basis for the requirements of the standards EN 13223, EN 13107, EN 12927 and EN 1908;
-   requirements relating to verification of ropes by calculation;
-   requirements relating to the determination of the drive power;
-   requirements for the actions of the ropes and carriers on the support structures and for the deformations of these support structures.
This document does not apply to installations for the transportation of goods nor to lifts.

1   General
1.1   Scope
This part of EN 12929 specifies the safety requirements for the general requirements for cableway installations designed to carry persons. These requirements are applied to the various types of installations and their environment.
This document defines general technical characteristics and prescribes design principles and general safety requirements.
It does not deal with details of operation and maintenance, nor with calculations and detailed requirements for the manufacture of components.
This Part 1 does not deal with special regulations applicable to bi-cable reversible aerial ropeways without carrier truck brakes, which are the subject of Part 2.
It includes requirements relating to the prevention of accidents and the protection of workers.
It does not apply to cableway installations for transportation of goods or to lifts.
Clause 11 describes the minimum requirements to be normatively satisfied for passageways and work areas. National regulations of a building or federal/state nature or which serve to protect particular groups of people remain unaffected.
It may not always be possible for all types of cableway installation to transport all particular groups of people (e.g. persons with restricted mobility). The objective should be, however, for a cableway installation to enable the transportation of the largest possible passenger population.
1.2   General principles
1.2.1   Stringent safety requirements are of the utmost importance for the design, manufacture, erection, maintenance and operation of cableway installations.
The design, manufacture, erection, maintenance and operation of cableways shall only be entrusted to contractors and experts who have the necessary knowledge and experience and who can ensure careful execution of the installation and proper management of the operation.
All the components shall be calculated exactly, be of a good mechanical and electrical design and be manufactured from adequate, defect-free materials possessing the required characteristics.
1.2.2   All components shall be kept in working order and in good condition. Reference is made to EN 1709 and EN 12397.
1.2.3   In addition to the European Standards specific to cableway installations, the relevant European specifications shall be used for the design, manufacture, erection, maintenance and operation of cableways.
1.2.4   This document takes into account, in certain cases, the careless behaviour of passengers. In all cases, use of the cableway in accordance with its intended use is assumed and not misuse of the installation.
1.3   Exceptions
1.3.1   Exceptions to the requirements of Standards EN 1709, EN 1908, EN 1909, EN 12385-8, EN 12385-9, EN 12397, EN 12927, EN 12929-1, EN 12929-2, EN 12930, EN 13107, EN 13223, EN 13243, EN 13796-1, EN 13796-2 and EN 13796-3 are permissible, particularly in the case of innovation, if they are justified by a safety analysis and offer at least an equivalent level of safety.
1.3.2   Exceptions to this Standard are also permissible in the case of replacement of components in existing installations.

This European Standard specifies additional safety requirements for bicable reversible aerial ropeways without carrier truck brakes. This document is applicable to the various types of cableway installations and takes into account their environment.
This Part of the EN 12929 contains:
- additional requirements relating to the integrity of the haul rope loop;
- additional requirements intended to prevent specific operational incidents;
- requirements concerning the attachment of the carriers to the haul rope.
This European Standard does not apply to cableway installations for transportation of goods nor to lifts.

This European Standard specifies the safety requirements applicable for calculations for installations for passenger transportation by rope. Its requirements are to be met taking into account the various types of installations systems and their environment. This standard contains: - general requirements for calculations and their presentation, - general requirements relating to the actions to be taken into account in the calculation, of the components as a basis for the requirements of the standards.

This part of EN 12929 specifies the safety requirements for general requirements for cableway installations designed to carry persons. These requirements are applied to the various types of installations and their environment.
This document defines general technical characteristics and prescribes design principles and general safety requirements.
It does not deal with details of operation and maintenance, nor with calculations and detailed requirements for the manufacture of components.
This Part 1 does not deal with special requirements applicable to bicable reversible aerial ropeways without carrier truck brakes, which are the subject of Part 2.
It includes requirements relating to the prevention of accidents and the protection of workers.
It does not apply to cableways for the transportation of goods, nor to inclined lifts.
1.2   General principles
1.2.1   Stringent safety requirements are of the utmost importance for the design, construction, installation, maintenance and operation of cableway installations designed to carry persons.
The design, construction, installation, maintenance and operation of cableways shall only be entrusted to contractors and experts who have the necessary knowledge and experience and who can ensure careful execution of the installation and proper management of the operation.
All the components shall be calculated exactly, be of a good mechanical and electrical design and be manufactured from adequate, defect-free materials possessing the required characteristics.
1.2.2   All components shall be kept in working order and in good condition. Reference is also made to prEN 1709 and prEN 12397.
1.2.3   In addition to the European Standards specific to cableway installations, the relevant European specifications shall be used for the design, construction, installation, maintenance and operation of cableways.

This document specifies additional safety requirements for reversible bicable aerial ropeways without carrier
truck brakes. This standard is applicable to the various types of installations and takes into account their
environment.
It contains:
.additional requirements relating to the integrity of the haul rope loop;
.additional requirements intended to prevent specific operational incidents;
.requirements concerning the attachment of the carriers to the haul rope.
It does not apply to installations for the transportation of goods, nor to inclined lifts.