EN 13480-2:2002

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kovinski industrijski cevovodi - 2. del: MaterialiMetallische industrielle Rohrleitungen - Teil 2: WerkstoffeTuyauteries industrielles métalliques - Partie 2: MatériauxMetallic industrial piping - Part 2: Materials77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 13480-2:2002SIST EN 13480-2:2002en01-november-2002SIST EN 13480-2:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13480-2May 2002ICS 23.040.01English versionMetallic industrial piping - Part 2: MaterialsTuyauteries industrielles métalliques - Partie 2: MatériauxMetallische industrielle Rohrleitungen - Teil 2: WerkstoffeThis European Standard was approved by CEN on 23 May 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13480-2:2002 ESIST EN 13480-2:2002

Metallic materials for industrial piping systems – grouping system and Europeanstandardized steels.14Annex B (normative)
Requirements for prevention of brittle fracture.29Annex C (normative)
Provisional technical delivery conditions for clad products for pressurepurposes.49Annex ZA (informative)
Clauses of this European Standard addressing essential safety requirements orother provisions of EU directives.53SIST EN 13480-2:2002

Part 3: Definition of parties involved.EN 10028-1, Flat products made of steels for pressure purposes – Part 1: General requirements.EN 10028-2, Flat products made of steels for pressure purposes – Part 2: Non-alloy and alloy steels with specifiedelevated temperature properties.EN 10028-3, Flat products made of steels for pressure purposes – Part 3: Weldable fine grain steels, normalized.EN 10028-4 , Flat products made of steels for pressure purposes – Part 4: Nickel alloyed steels with specified lowtemperature properties.EN 10028-5, Flat products made of steels for pressure purposes – Part 5: Weldable fine grain steels,thermomechanically rolled.EN 10028-6, Flat products made of steels for pressure purposes – Part 6: Weldable fine grain steels, quenchedand tempered.EN 10028-7, Flat products made of steels for pressure purposes – Part 7: Stainless steels.SIST EN 13480-2:2002

temperature properties.EN 12074, Welding consumables – Quality requirements for manufacture, supply and distribution of consumablesfor welding and allied processes.prEN 13479-1, Welding consumables – Test methods and quality requirements for conformity evaluation ofconsumables – Part 1: Primary methods and evaluation.EN 13480-1, Metallic industrial piping – Part 1: General.EN 13480-3:2002, Metallic industrial piping – Part 3: Design and calculation.EN 13480-4:2002, Metallic industrial piping – Part 4: Fabrication and installation.EN 13480-5:2002, Metallic industrial piping – Part 5: Inspection and testing.EN ISO 2566-1, Steel – Conversion of elongation values – Part 1: Carbon and low alloy steels (ISO 2566-1:1984).EN ISO 2566-2, Steel – Conversion of elongation values – Part 2: Austenitic steels (ISO 2566-2:1984).CR ISO 15608, Welding – Guidelines for a metallic material grouping system (ISO/TR 15608:2000).3 Terms, definitions, symbols and units3.1 Terms and definitionsFor the purposes of this Part of this European Standard the terms and definitions given in EN 13480-1, EN 764-3, andthe following definitions apply.SIST EN 13480-2:2002

1 N/mm2 = 1 MPa4 Requirements for materials to be used for pressure containing parts in industrialpiping4.1 General4.1.1Materials to be used for pressure containing parts in industrial piping shall meet the general requirementsof 4.1 and the special provisions of 4.2 if applicable. Materials for pressure containing parts shall be orderedcomplying with the technical delivery conditions in 4.3.Marking of materials for pressure containing parts shall be performed in accordance with 4.4.Materials shall be selected in accordance with Annex A.SIST EN 13480-2:2002

14 %for the transverse direction; and
16 %for the longitudinal direction, or where this is the less critical direction, the transverse direction;when measured on a gauge length, L0, calculated as follows:SL065,50
(4.1-1)where0 is the original cross sectional area within the gauge length in order to fulfil formula 4.1-1.However, lower elongation values than specified in 4.1 (e. g. for fasteners or castings) may also be applied, providedthat appropriate measures shall be
taken by the parties concerned to compensate for these lower values and thatcompliance with the specific requirements is verifiable.NOTEExamples of appropriate measures: application of higher safety factors in design; performance of appropriate burst tests to demonstrate ductile material behaviour.4.1.5When measured on a gauge length other thanthat stated in 4.1.4, the minimum elongation after fractureshall be determined by converting the elongation given in 4.1.4 in accordance with: EN ISO 2566-1 for carbon and low alloy steels; EN ISO 2566-2 for austenitic steels.SIST EN 13480-2:2002

27 J for ferritic and 1,5 % to 5 % Ni alloyed steels;
40 J for steels of material groups 8, 9.3 and 10,at a test temperature in accordance with Annex B, but not higher than 20 C. The other requirements of Annex B shallalso apply.4.1.7The chemical composition of steels intended for welding or forming shall not exceed the values given inTable 4.1-1. Exceptions shall be technically justified.Table 4.1-1 — Maximum carbon, phosphorus and sulphur content for steel intended forwelding or formingMaximum content of cast analysisMaterial group(according to Table A.1)% C% P% SSteel(1 to 6 and 9)0,23 a0,0350,025Ferritic stainless steels(7.1)0,080,0400,015Martensitic stainless steels(7.2)0,060,0400,015Austenitic stainless steels(8.1)0,080,0450,015 bAustenitic stainless steels(8.2)0,100,0350,015Austenitic-ferritic stainless steels(10)0,0300,0350,015a
Maximum content of product analysis 0,25 %.b
For products to be machined a controlled sulphur content of 0,015 % to 0,030 % is permitted by agreementprovided the resistance to corrosion is satisfied for the intended purpose.4.2 Special provisions4.2.1 Special properties4.2.1.1 GeneralWhere the behaviour of a material can be affected by manufacturing processes or operating conditions, to anextent that would adversely affect the safety or service life of the piping system, this shall be taken intoconsideration when specifying the material.SIST EN 13480-2:2002

Interpolation for design temperaturesbetween 50 C and 100 C shall be performed with the values of ReH at room temperature and at 100 °C, and using20 °C as the starting point for interpolation. Above 100 C linear interpolation shall be performed between thetabulated values given in the appropriate material standards.In the case of creep rupture strength values or strength values for plastic strain in a given time, linear interpolationshall be permissible only if the difference between the two temperatures serving as starting points for the interpolationis equal to or less than 10 C.4.2.2.2Materials in the creep range shall not be used unless the creep rupture strength values or strength values forplastic strain needed for design are specified in the base material specification. The manufacturer of the piping systeminstallation shall be assured by the material supplier that the material supplied is capable of complying with specifiedproperties (within the normal scatter band) by a statement that the manufacturing processes have remainedequivalent to those for the steel for which the test results were obtained.4.2.3 Prevention of brittle fractureThe requirements given in Annex B shall apply.4.2.4 Specific requirements for fastenersFasteners includes bolts, studs and nuts.Free cutting steel shall not be used. Fasteners made of carbon steel or low alloyed ferritic steel with > 3,5 % nickelshall not be used above 300 C.The specified minimum tensile strength of bar material of ferritic and martensitic steel for bolts shall notexceed 1 000 N/mm2. The minimum elongation after fracture of bar material shall be at least 14%.SIST EN 13480-2:2002

460 N/mm² b and with analysisin % :C
0,25Si
0,60Mn
1,70Mo
0,70 cS
0,045P
0,045Cu
0,40 cNi
0,5 cCr
0,3 (0,4 for castings) cNb
0,05V
0,12 cTi
0,051.1Steels with a specified minimum specified yield strength ReH
275 N/mm²1.2Steels with a specified minimum yield strength 275 N/mm² < ReH
360 N/mm²1.3Normalized fine grain steels with a specified minimum yield strength ReH > 360 N/mm²1.4Steels with improved atmospheric corrosion resistance whose analysis may exceed therequirements for the single elements as indicated under 12Thermomechanically treated fine grain steels and cast steels with a specified minimumyield strength ReH > 360 N/mm²2.1Thermomechanically treated fine grain steels and cast steels with a specified minimumyield strength 360 N/mm² < ReH
460 N/mm²2.2Thermomechanically treated fine grain steels and cast steels with a specified minimumyield strength ReH > 460 N/mm²3Quenched and tempered steels and precipitation hardened steels except stainlesssteels with a specified minimum yield strength ReH > 360 N/mm²3.1Quenched and tempered steels with a specified minimum yield strength360 N/mm < ReH
690 N/mm²3.2Quenched and tempered steels with a specified minimum yield strengthReH > 690 N/mm²3.3Precipitation hardened steels except stainless steels4Low vanadium alloyed Cr-Mo-(Ni) steels with Mo
0,7 % and V
0,1 %4.1Steels with Cr
0,3 % and Ni
0,7 %4.2Steels with Cr
0,7 % and Ni
1,5 %(continued)SIST EN 13480-2:2002

0,35 % d5.1Steels with 0,75 %
Cr
1,5 % and Mo
0,7 %5.2Steels with 1,5 % < Cr
3,5 % and 0,7 % < Mo
1,2 %5.3Steels with 3,5 % < Cr
7,0 % and 0,4 % < Mo
0,7 %5.4Steels with 7,0 % < Cr
10,0 % and 0,7 % < Mo
1,2 %6High vanadium alloyed Cr-Mo-(Ni) steels6.1Steels with 0,3 %
Cr
0,75 %, Mo
0,7 % and V
0,35 %6.2Steels with 0,75 % < Cr
3,5 %, 0,7 % < Mo
1,2 % and V
0,35 %6.3Steels with 3,5 % < Cr
7,0 %, Mo
0,7 % and 0,45 %
V
0,55 %6.4Steels with 7,0 % < Cr
12,5 %, 0,7 % < Mo
1,2 % and V
0,35 %7Ferritic, martensitic or precipitation hardened stainless steels with C
0,35 % and10,5 %
Cr
30 %7.1Ferritic stainless steels7.2Martensitic stainless steels7.3Precipitation hardened stainless steels8Austenitic steels8.1Austenitic stainless steels with Cr
19 %8.2Austenitic stainless steels with Cr > 19 %8.3Manganese austenitic stainless steels with 4 % < Mn
12 %9Nickel alloyed steels with Ni
10,0 %9.1Nickel alloyed steels with Ni
3,0 %9.2Nickel alloyed steels with 3,0 % < Ni
8,0 %9.3Nickel alloyed steels with 8,0 % < Ni
10,0 %10Austenitic-ferritic stainless steels (duplex)10.1Austenitic-ferritic stainless steels with Cr
24 %10.2Austenitic-ferritic stainless steels with Cr > 24 %11Steels covered by group 1 e except 0,25 % < C
0,5 %11.1Steels as indicated under 11 with 0,25 %
C
0,35 %11.2Steels as indicated under 11 with 0,35 %
C
0,5 %a
This table is a reprint of CR ISO 15608: 2000.bIn accordance with the specification of the steel product standards, ReH may be replaced by Rp0,2 or Rp0,5.cA higher value is accepted provided that Cr + Mo + Ni + Cu + V
0,75 %.d"Free of vanadium" means not deliberately added to the material.eA higher value is accepted provided that Cr + Mo + Ni + Cu + V
1 %.SIST EN 13480-2:2002
QT601005.1a8 plate and stripEN 10028-2elevated temperature properties13CrMo4-51.7335QT1001505.1a9 plate and stripEN 10028-2elevated temperature properties10CrMo9-101.7380NT0605.2a10 plate and stripEN 10028-2elevated temperature properties10CrMo9-101.7380NT
QT601005.2a11 plate and stripEN 10028-2elevated temperature properties10CrMo9-101.7380 QT1001505.2a12 plate and stripEN 10028-2elevated temperature properties11CrMo9-101.7383NT
QT0605.2a13 plate and stripEN 10028-2elevated temperature properties11CrMo9-101.7383QT601005.2a14 plate and stripEN 10028-3fine grain steel normalizedP275N1.0486N01501.1a15 plate and stripEN 10028-3fine grain steel normalizedP275NH1.0487N01501.1a16 plate and stripEN 10028-3fine grain steel normalizedP275NL11.0488N01501.1a17 plate and stripEN 10028-3fine grain steel normalizedP275NL21.1104N01501.1a18 plate and stripEN 10028-3fine grain steel normalizedP355N1.0562N01501.2a19 plate and stripEN 10028-3fine grain steel normalizedP355NH1.0565N01501.2a20 plate and stripEN 10028-3fine grain steel normalizedP355NL11.0566N01501.2a21 plate and stripEN 10028-3fine grain steel normalizedP355NL21.1106N01501.2a22 plate and stripEN 10028-3fine grain steel normalizedP460N1.8905N01501.3a23 plate and stripEN 10028-3fine grain steel normalizedP460NH1.8935N01501.3a24 plate and stripEN 10028-3fine grain steel normalizedP460NL11.8915N01501.3a25 plate and stripEN 10028-3fine grain steel normalizedP460NL21.8918N01501.3a26 plate and stripEN 10028-4low temperature properties11MnNi5-31.6212N NT0509.1a27 plate and stripEN 10028-4low temperature properties13MnNi6-31.6217N NT0509.1a28 plate and stripEN 10028-4low temperature properties15NiMn61.6228N NT QT0509.1a29 plate and stripEN 10028-4low temperature properties12Ni141.5637N NT QT0509.2a30 plate and stripEN 10028-4low temperature properties12Ni191.5680N NT QT0509.2a31 plate and stripEN 10028-4low temperature propertiesX8Ni91.5662NNT QT0509.3a32 plate and stripEN 10028-4low temperature propertiesX7Ni91.5663QT0509.3a33 plate and stripEN 10028-6fine grain steel, quenched/temperedP355Q1.8866QT01501.2a34 plate and stripEN 10028-6fine grain steel, quenched/temperedP355QH1.8867QT01501.2a35 plate and stripEN 10028-6fine grain steel, quenched/temperedP355QL11.8868QT01501.2aSIST EN 13480-2:2002

AT07510.1 a
d46 plate and stripEN 10028-7stainless steel, austenitic-ferriticX2CrNiMoN22-5-31.4462
AT07510.1 a
d47 plate and stripEN 10028-7stain. steel, austenitic-ferritic, specialX2CrNiMoCuN25-6-31.4507
AT07510.2 a
d48 plate and stripEN 10028-7stain. steel, austenitic-ferritic, specialX2CrNiMoN25-7-41.4410
AT07510.2 a
d49 plate and stripEN 10028-7stain. steel, austenitic-ferritic, specialX2CrNiMoCuWN25-7-41.4501
AT07510.2 a
d50 plate and stripEN10028-7stainless steel, austeniticX2CrNiN18-71.4318
AT0758.1a51 plate and stripEN 10028-7stainless steel, austeniticX2CrNi18-91.4307
AT0758.1a52 plate and stripEN 10028-7stainless steel, austeniticX2CrNi19-111.4306
AT0758.1a53 plate and stripEN 10028-7stainless steel, austeniticX2CrNiN18-101.4311
AT0758.1 a54 plate and stripEN 10028-7stainless steel, austeniticX5CrNi18-101.4301
AT0758.1a55 plate and stripEN 10028-7stainless steel, austeniticX5CrNiN19-91.4315
AT0758.1a56 plate and stripEN 10028-7stainless steel, austeniticX6CrNi18-101.4948
AT0758.1a57 plate and stripEN 10028-7stainless steel, austeniticX6CrNiTi18-101.4541
AT0758.1a58 plate and stripEN 10028-7stainless steel, austeniticX6CrNiTiB18-101.4941
AT0758.1a59 plate and stripEN 10028-7stainless steel, austeniticX2CrNiMo17-12-21.4404
AT0758.1a60 plate and stripEN 10028-7stainless steel, austeniticX2CrNiMoN17-11-21.4406
AT0758.1a61 plate and stripEN 10028-7stainless steel, austeniticX5CrNiMo17-12-21.4401
AT0758.1a62 plate and stripEN 10028-7stainless steel, austeniticX6CrNiMoTi17-12-21.4571
AT0758.1a63 plate and stripEN 10028-7stainless steel, austeniticX2CrNiMo17-12-31.4432
AT0758.1a64 plate and stripEN 10028-7stainless steel, austeniticX2CrNiMo18-14-31.4435
AT0758.1a65 plate and stripEN 10028-7stainless steel, austeniticX2CrNiMoN17-13-51.4439
AT0758.1a66 plate and stripEN 10028-7stainless steel, austeniticX3CrNiMoBN17-13-31.4910
AT0758.1a67 plate and stripEN 10028-7stainless steel, austenitic, specialX6CrNiNb18-101.4550
AT0758.1a68 plate and stripEN 10028-7stainless steel, austenitic, specialX8CrNiNb16-131.4961
AT0758.1a69 plate and stripEN 10028-7stainless steel, austenitic, specialX6CrNiMoNb17-12-21.4580
AT0758.1a70 plate and stripEN 10028-7stainless steel, austenitic, specialX2CrNiMoN17-13-31.4429
AT0758.1a71 plate and stripEN 10028-7stainless steel, austenitic, specialX3CrNiMoN17-13-31.4436
AT0758.1a72 plate and stripEN 10028-7stainless steel, austenitic, specialX2CrNiMoN18-12-41.4434
AT0758.1a73 plate and stripEN 10028-7stainless steel, austenitic, specialX2CrNiMo18-15-41.4438
AT0758.1aSIST EN 13480-2:2002
AT0758.2a75 plate and stripEN 10028-7stainless steel, austeniticX6CrNi25-201.4951
AT0758.2a76 plate and stripEN 10028-7stainless steel, austeniticX1NiCrMoCu25-20-51.4539
AT0758.2a77 plate and stripEN 10028-7stainless steel, austeniticX5NiCrAlTi31-201.4958
AT0758.2a78 plate and stripEN 10028-7stainless steel, austeniticX5NiCrAlTi31-20 + RA1.4958+RA
RA0758.2a79 plate and stripEN 10028-7stainless steel, austeniticX8NiCrAlTi32-211.4959
AT0758.2a80 plate and stripEN 10028-7stainless steel, austenitic, specialX1CrNi25-211.4335
AT0758.2a81 plate and stripEN 10028-7stainless steel, austenitic, specialX1CrNiMoN25-22-21.4466
AT0758.2a82 plate and stripEN 10028-7stainless steel, austenitic, specialX1NiCrMoCu31-27-41.4563
AT0758.2a83 plate and stripEN 10028-7stainless steel, austenitic, specialX1CrNiMoCuN25-25-51.4537
AT0758.2a84 plate and stripEN 10028-7stainless steel, austenitic, specialX1CrNiMoCuN20-18-71.4547
AT0758.2 a85 plate and stripEN 10028-7stainless steel, austenitic, specialX1NiCrMoCuN25-20-71.4529
AT0758.2a86 barEN 10272stainless steel, austenitic-ferriticX2CrNiMoN22-5-31.4462
AT016010.1
a
d87 barEN 10272stainless steel, austenitic-ferriticX2CrNiN23-41.4362
AT016010.1
a
d88 barEN 10272stainless steel, austenitic-ferriticX2CrNiMoCuN25-6-31.4507
AT016010.2
a
d89 barEN 10272stainless steel, austenitic-ferriticX2CrNiMoN25-7-41.4410
AT016010.2
a
d90 barEN 10272stainless steel, austenitic-ferriticX2CrNiMoCuWN25-7-41.4501
AT016010.2
a
d91 barEN 10272stainless steel, austeniticX2CrNi18-91.4307
AT02508.1
a92 barEN 10272stainless steel, austeniticX2CrNi19-111.4306
AT02508.1
a93 barEN 10272stainless steel, austeniticX2CrNiN18-101.4311
AT02508.1
a94 barEN 10272stainless steel, austeniticX5CrNi18-101.4301
AT02508.1
a95 barEN 10272stainless steel, austeniticX6CrNiTi18-101.4541
AT02508.1
a96 barEN 10272stainless steel, austeniticX2CrNiMo17-12-21.4404
AT02508.1
a97 barEN 10272stainless steel, austeniticX2CrNiMoN17-11-21.4406
AT02508.1
a98 barEN 10272stainless steel, austeniticX5CrNiMo17-12-21.4401
AT02508.1
a99 barEN 10272stainless steel, austeniticX6CrNiMoTi17-12-21.4571
AT02508.1
a100 barEN 10272stainless steel, austeniticX2CrNiMo17-12-31.4432
AT02508.1
a101 barEN 10272stainless steel, austeniticX2CrNiMo18-14-31.4435
AT02508.1
a102 barEN 10272stainless steel, austeniticX2CrNiMo17-13-51.4439
AT02508.1
a103 barEN 10272stainless steel, austeniticX6CrNiNb18-101.4550
AT02508.1
a104 barEN 10272stainless steel, austeniticX6CrNiMoNb17-12-21.4580
AT02508.1
a105 barEN 10272stainless steel, austeniticX2CrNiMoN17-13-31.4429
AT02508.1
a106 barEN 10272stainless steel, austeniticX3CrNiMo17-13-31.4436
AT02508.1
a107 barEN 10272stainless steel, austeniticX1NiCrMoCu25-20-51.4539
AT02508.2
a108 barEN 10272stainless steel, austeniticX1NiCrMoCu31-27-41.4563
AT02508.2
a109 barEN 10272stainless steel, austeniticX1CrNiMoCuN20-18-71.4547
AT02508.2
a110 barEN 10272stainless steel, austeniticX1NiCrMoCuN25-20-71.4529
AT02508.2
a111 barEN 10273elevated temperature propertiesP235GH1.0345N01501.1
aSIST EN 13480-2:2002
a113 barEN 10273elevated temperature propertiesP265GH1.0425N01501.1
a114 barEN 10273elevated temperature propertiesP275NH1.0487N01501.1
a115 barEN 10273elevated temperature properties16Mo31.5415N01501.1a116 barEN 10273elevated temperature propertiesP295GH1.0481N01501.2
a117 barEN 10273elevated temperature propertiesP355GH1.0473N01501.2
a118 barEN 10273elevated temperature propertiesP355QH1.8867QT01501.2
a f119 barEN 10273elevated temperature propertiesP460NH1.8871N01501.3
a120 barEN 10273elevated temperature propertiesP355NH1.0565N01502.1
a121 barEN 10273elevated temperature propertiesP460QH1.8871QT01503.1
a122 barEN 10273elevated temperature properties13CrMo4-51.7335NT, QT601005.1 a123 barEN 10273elevated temperature properties13CrMo4-51.7335QT1001505.1 a124 barEN 10273elevated temperature properties10CrMo9-101.7380NT0605.2 a125 barEN 10273elevated temperature properties10CrMo9-101.7380NT, QT601505.2 a126 barEN 10273elevated temperature properties11CrMo9-101.7383NT, QT0605.2 a127 barEN 10273elevated temperature properties11CrMo9-101.7383QT601005.2 a128 barEN 10269fastenersC35E1.1181N060- e a129 barEN 10269fastenersC35E1.1181QT0150- e a130 barEN 10269fastenersC45E1.1191N0 60- e a131 barEN 10269fastenersC45E1.1191QT0150- e a132 barEN 10269fasteners35B21.5511QT0150- e a133 barEN 10269fasteners20Mn51.1133N0150- e a134 barEN 10269fasteners25CrMo41.7218QT0150- e a135 barEN 10269fasteners42CrMo41.7228QT060- e a136 barEN 10269fasteners42CrMo5-61.7233QT0150- e a137 barEN 10269fasteners40CrMoV4-61.7711QT0100- e a138 barEN 10269fasteners21CrMoV5-71.7709QT0160- e a139 barEN 10269fasteners20CrMoVTiB4-101.7729QT0160- e a140 barEN 10269fastenersX15CrMo5-11.7390NT, QT0160- e a141 barEN 10269fastenersX22 CrMo V12-11.4923QT10160- e a142 barEN 10269fastenersX12CrNiMoV12-31.4938QT0160- e a143 barEN 10269fastenersX2CrNi18-91.4307
AT0160- e a144 barEN 10269fastenersX2CrNi18-91.4307C700035- e a145 barEN 10269fastenersX5CrNi18-101.4301
AT0160- e a146 barEN 10269fastenersX5CrNi18-101.4301C700035- e a147 barEN 10269fastenersX4CrNi18-121.4303
AT0160- e a148 barEN 10269fastenersX4CrNi18-121.4303C700035- ea149 barEN 10269fastenersX2CrNiMo17-12-21.4404
AT0160- eaSIST EN 13480-2:2002

AT0160- e a152 barEN 10269fastenersX5CrNiMo17-12-21.4401C700035- ea153 barEN 10269fastenersX2CrNiMoN17-13-31.4429
AT0160- ea154 barEN 10269fastenersX3CrNiCu18-9-41.4567AT0160- ea155 barEN 10269fastenersX3CrNiCu18-9-41.4567C700035- ea156 barEN 10269fastenersX6CrNi18-101.4948
AT0160- ea157 barEN 10269fastenersX10CrNiMoMnNbVB15-10-11.4982AT
+ WW0100- ea158 barEN 10269fastenersX3CrNiMoBN17-13-31.4910
AT0160- ea159 barEN 10269fastenersX6CrNiMoB17-12-21.4919
AT0160- ea160 barEN 10269fastenersXCrNiTiB18-101.4941
AT0160- ea161 barEN 10269fastenersX6NiCrTiMoVB25-15-21.4980AT
+ P0160- ea162 barEN 10269fastenersX7CrNiMoBNb16-161.4986WW
+ P0100- ea163 barEN 10269fasteners19MnB41.5523QT016- ea164 barEN 10269fasteners41NiCrMo7-3-21.6583QT0160- e
a165 barEN 10269fasteners34CrNiMo61.6582QT0100- e
a166 barEN 10269fasteners30CrNiMo81.6580QT0100- e
a167 barEN 10269fastene
...