EN 13445-5:2002
(Main)Unfired pressure vessels - Part 5: Inspection and testing
Unfired pressure vessels - Part 5: Inspection and testing
This Part of this European Standard specifies the inspection and testing of individual and serially produced pressure vessels made of steels in accordance with EN 13445-2 predominantly subject to non cyclic operation (i.e. vessels operating below 500 full equivalent pressure cycles).
Special provisions for cyclic operation are given in EN 13445-3 and in Annex G of this Part.
This Part does not give inspection and testing provisions for vessels designed using Design by Analysis - Direct Route (DBA) of Annex B of EN 13445-3:2002.
NOTE The responsibilities of parties involved in the conformity assessment procedures are given in Directive 97/23/EC. Guidance on this can be found in CR 13445-7.
Unbefeuerte Druckbehälter - Teil 5: Inspektion und Prüfung
Dieser Teil 5 der EN 13445 legt die Inspektion und Prüfung von einzeln und in Serie gefertigten Druckbehältern aus Stählen nach EN 13445-2 unter vorwiegend ruhender Belastung fest (d. h. Behälter mit einer äquivalenten Anzahl voller Druckzyklen im Betrieb unter 500).
Besondere Anforderungen für den Betrieb unter zyklischer Belastung sind in EN 13445-3 und Anhang G des vorliegenden Teils der Norm enthalten.
Dieser Teil der Norm enthält keine Anforderungen für die Inspektion und Prüfung von Behältern mit direkter Auslegung nach Analyseverfahren (DBA) nach Anhang B in EN 13445-3.
ANMERKUNG Wird eine CE-Kennzeichnung gewünscht, können weitere Informationen über Tätigkeiten in Verbindung mit den verschiedenen Stellen, die Prüfungen durchführen, CR 13445-7 entnommen werden.
Récipients sous pression non soumis à la flamme - Partie 5: Inspection et contrôles
La présente partie de la Norme européenne traite de l'inspection et des contrôles des récipients sous pression construits à l'unité ou en série, à partir d'aciers conformes à l'EN 13445-2 soumis de manière prédominante à une exploitation non cyclique (c'est à dire des récipients soumis en exploitation à moins de 500 cycles pleins équivalents en pression).
Des dispositions particulières relatives à l'exploitation cyclique sont données dans l'EN 13445-3 et en annexe G de la présente partie.
La présente partie ne donne pas de dispositions relatives à l'inspection et au contrôle des récipients conçus en utilisant la conception par l'analyse - Méthode directe (DBA) de l'annexe B de l'EN 13445-3:2002.
NOTE Les responsabilités des parties impliquées dans les procédures d'évaluation de la conformité sont données dans la directive 97/23/CE. Un guide relatif à cet aspect peut être trouvé dans le CR 13445-7.
Neogrevane tlačne posode - 5. del: Kontrola in preskušanje
General Information
- Status
- Withdrawn
- Publication Date
- 28-May-2002
- Withdrawal Date
- 21-Jul-2009
- Technical Committee
- CEN/TC 54 - Unfired pressure vessels
- Drafting Committee
- CEN/TC 54 - Unfired pressure vessels
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 22-Jul-2009
- Completion Date
- 22-Jul-2009
Relations
- Effective Date
- 25-Jul-2009
- Referred By
EN 13831:2007 - Closed expansion vessels with built in diaphragm for installation in water - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
Frequently Asked Questions
EN 13445-5:2002 is a standard published by the European Committee for Standardization (CEN). Its full title is "Unfired pressure vessels - Part 5: Inspection and testing". This standard covers: This Part of this European Standard specifies the inspection and testing of individual and serially produced pressure vessels made of steels in accordance with EN 13445-2 predominantly subject to non cyclic operation (i.e. vessels operating below 500 full equivalent pressure cycles). Special provisions for cyclic operation are given in EN 13445-3 and in Annex G of this Part. This Part does not give inspection and testing provisions for vessels designed using Design by Analysis - Direct Route (DBA) of Annex B of EN 13445-3:2002. NOTE The responsibilities of parties involved in the conformity assessment procedures are given in Directive 97/23/EC. Guidance on this can be found in CR 13445-7.
This Part of this European Standard specifies the inspection and testing of individual and serially produced pressure vessels made of steels in accordance with EN 13445-2 predominantly subject to non cyclic operation (i.e. vessels operating below 500 full equivalent pressure cycles). Special provisions for cyclic operation are given in EN 13445-3 and in Annex G of this Part. This Part does not give inspection and testing provisions for vessels designed using Design by Analysis - Direct Route (DBA) of Annex B of EN 13445-3:2002. NOTE The responsibilities of parties involved in the conformity assessment procedures are given in Directive 97/23/EC. Guidance on this can be found in CR 13445-7.
EN 13445-5:2002 is classified under the following ICS (International Classification for Standards) categories: 23.020.30 - Pressure vessels, gas cylinders. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13445-5:2002 has the following relationships with other standards: It is inter standard links to EN 13445-5:2009, EN 13831:2007, EN 378-2:2008+A2:2012, EN 13445-5:2002/A2:2005, EN 13445-5:2002/A1:2007, EN 13445-5:2002/A5:2006, EN 13445-5:2002/A3:2006, EN 13445-5:2002/A4:2006, EN 13445-5:2002/A10:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13445-5:2002 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13445-5:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2002
1HRJUHYDQHWODþQHSRVRGHGHO .RQWURODLQSUHVNXãDQMH
Unfired pressure vessels - Part 5: Inspection and testing
Unbefeuerte Druckbehälter - Teil 5: Inspektion und Prüfung
Récipients sous pression non soumis a la flamme - Part
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...