EN ISO 22300:2018
(Main)Security and resilience - Vocabulary (ISO 22300:2018)
Security and resilience - Vocabulary (ISO 22300:2018)
ISO 22300:2018 defines terms used in security and resilience standards.
Sicherheit und Resilienz — Vokabular (ISO 22300:2018)
Dieses Dokument legt Begriffe fest, die in den Normen zur Sicherheit und Resilienz verwendet werden.
Sécurité et résilience - Vocabulaire (ISO 22300:2018)
ISO 2300:2018 définit les termes utilisés dans les normes relatives à la sécurité et à la résilience.
Varnost in vzdržljivost - Terminologija (ISO 22300:2018)
Ta dokument določa izraze s področja standardov varnosti in odpornosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2018
1DGRPHãþD
SIST EN ISO 22300:2014
Varnost in vzdržljivost - Terminologija (ISO 22300:2018)
Security and resilience - Vocabulary (ISO 22300:2018)
Sicherheit und Resilienz - Terminologie (ISO 22300:2018)
Sécurité sociétale - Terminologie (ISO 22300:2018)
Ta slovenski standard je istoveten z: EN ISO 22300:2018
ICS:
01.040.03 Storitve. Organizacija Services. Company
podjetja, vodenje in kakovost. organization, management
Uprava. Transport. and quality. Administration.
Sociologija. (Slovarji) Transport. Sociology.
(Vocabularies)
03.100.01 Organizacija in vodenje Company organization and
podjetja na splošno management in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 22300
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2018
EUROPÄISCHE NORM
ICS 01.040.03; 03.100.01 Supersedes EN ISO 22300:2014
English Version
Security and resilience - Vocabulary (ISO 22300:2018)
Sécurité et résilience - Vocabulaire (ISO 22300:2018) Sicherheit und Resilienz - Terminologie (ISO
22300:2018)
This European Standard was approved by CEN on 22 January 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22300:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 22300:2018) has been prepared by Technical Committee ISO/TC 292 “Security
and resilience” in collaboration with Technical Committee CEN/TC 391 “Societal and citizen security”
the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2018, and conflicting national standards
shall be withdrawn at the latest by September 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 22300:2014.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 22300:2018 has been approved by CEN as EN ISO 22300:2018 without any modification.
INTERNATIONAL ISO
STANDARD 22300
Second edition
2018-02
Security and resilience — Vocabulary
Sécurité et résilience — Vocabulaire
Reference number
ISO 22300:2018(E)
©
ISO 2018
ISO 22300:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
ISO 22300:2018(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
Bibliography .35
ISO 22300:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 292, Security and resilience.
This second edition cancels and replaces the first edition (ISO 22300:2012), which has been technically
revised.
The main changes compared to the previous edition are that terms have been added from recent
published documents and documents transferred to ISO/TC 292.
iv © ISO 2018 – All rights reserved
INTERNATIONAL STANDARD ISO 22300:2018(E)
Security and resilience — Vocabulary
1 Scope
This document defines terms used in security and resilience standards.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http:// www .electropedia .org/
— ISO Online browsing platform: available at https:// www .iso .org/ obp
3.1
activity
process (3.180) or set of processes undertaken by an organization (3.158) (or on its behalf) that produces
or supports one or more products or services (3.181)
EXAMPLE Accounts, call centre, IT, manufacture, distribution.
3.2
affected area
location that has been impacted by a disaster (3.69)
Note 1 to entry: The term is more relevant to immediate evacuations (3.80).
3.3
after-action report
document (3.71) which records, describes and analyses the exercise (3.83), drawing on debriefs and
reports from observers (3.154), and derives lessons from it
Note 1 to entry: The after-action report documents the results from the after-action review (3.197).
Note 2 to entry: An after-action report is also called a final exercise report.
3.4
alert
part of public warning (3.183) that captures attention of first responders and people at risk (3.166) in a
developing emergency (3.77) situation
3.5
all clear
message or signal that the danger is over
3.6
all-hazards
naturally occurring event (3.82), human induced event (both intentional and unintentional) and
technology caused event with potential impact (3.107) on an organization (3.158), community (3.42) or
society and the environment on which it depends
ISO 22300:2018(E)
3.7
alternate worksite
work location, other than the primary location, to be used when the primary location is not accessible
3.8
appropriate law enforcement and other government officials
government and law enforcement personnel (3.169) that have specific legal jurisdiction over the
international supply chain (3.127) or portions of it
3.9
area at risk
location that could be affected by a disaster (3.69)
Note 1 to entry: The term is more relevant to preventative evacuations (3.80).
3.10
asset
anything that has value to an organization (3.158)
Note 1 to entry: Assets include but are not limited to human, physical, information (3.116), intangible and
environmental resources (3.193).
3.11
attack
successful or unsuccessful attempt(s) to circumvent an authentication solution (3.19), including attempts
to imitate, produce or reproduce the authentication elements (3.17)
3.12
attribute data management system
ADMS
system that stores, manages and controls access of data pertaining to objects (3.151)
3.13
audit
systematic, independent and documented process (3.180) for obtaining audit evidence and evaluating it
objectively to determine the extent to which the audit criteria are fulfilled
Note 1 to entry: The fundamental elements of an audit include the determination of the conformity (3.45) of an
object (3.151) according to a procedure (3.179) carried out by personnel (3.169) not being responsible for the
object audited.
Note 2 to entry: An audit can be an internal audit (first party) or an external audit (second party or third party),
and it can be a combined audit or a joint audit.
Note 3 to entry: Internal audits, sometimes called first-party audits, are conducted by, or on behalf of, the
organization (3.158) itself for management (3.135) review (3.197) and other internal purposes, and can form the
basis for an organization’s declaration of conformity. Independence can be demonstrated by the freedom from
responsibility for the activity (3.1) being audited.
Note 4 to entry: External audits include those generally called second- and third-party audits. Second-party
audits are conducted by parties having an interest in the organization, such as customers, or by other persons
on their behalf. Third-party audits are conducted by external, independent auditing organizations such as those
providing certification/registration of conformity or government agencies.
Note 5 to entry: When two or more management systems (3.137) are audited together, this is termed a
combined audit.
Note 6 to entry: When two or more auditing organizations cooperate to audit a single auditee, this is termed a
joint audit.
Note 7 to entry: “Audit evidence” and “audit criteria” are defined in ISO 19011.
Note 8 to entry: ISO 28000 specifies the requirements (3.190) for a security management (3.227) system.
2 © ISO 2018 – All rights reserved
ISO 22300:2018(E)
[SOURCE: ISO 9000:2015, 3.13.1, modified — Note 5 to entry has been replaced and Notes 6 to 8 to
entry have been added.]
3.14
auditor
person who conducts an audit (3.13)
[SOURCE: ISO 19011:2011, 3.8]
3.15
authentic material good
material good (3.139) produced under the control of the legitimate manufacturer, originator of the
goods (3.98) or rights holder (3.198)
3.16
authentication
process (3.180) of corroborating an entity (3.79) or attributes with a specified or understood level of
assurance
3.17
authentication element
tangible object (3.151), visual feature or information (3.116) associated with a material
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.