EN 14930:2007
(Main)Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces
Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces
This European Standard specifies a method for combustion engine driven pedestrian controlled and hand-held machines with or without back pack power unit used in agriculture, forestry and gardening to determine those parts of the surfaces identified by the product specific standards that are hot surfaces and can be touched unintentionally by an operator during normal operation.
This European Standard is only applicable together with product specific standards for the categories of machines specified above.
This European Standard does not specify which surfaces shall be assessed.
Land- und forstwirtschaftliche Maschinen und Gartengeräte - Mitgängergeführte und handgehaltene Maschinen - Bestimmung der Zugänglichkeit von heißen Oberflächen
Diese Europäische Norm enthält ein Verfahren für verbrennungsmotorgetriebene mitgängergeführte und handgehaltene Maschinen mit oder ohne rückengetragener Antriebseinheit zur Verwendung in der Land- und Forstwirtschaft sowie im Gartenbau zur Bestimmung der Teile von Oberflächen, die in einer produktspezifischen Norm als heiß identifiziert worden sind und die beim normalen Betrieb durch die Bedienungsperson unabsichtlich berührt werden können.
Diese Europäische Norm ist nur zusammen mit produktspezifischen Normen von oben beschriebenen Arten von Maschinen anwendbar.
Diese Europäische Norm legt nicht fest, welche Oberflächen zu bewerten sind.
Matériels agricoles et forestiers et matériels de jardinage - Machines portables à la main et à conducteur à pied - Détermination du risque de contact avec les surfaces chaudes
La présente norme spécifie une méthode pour les machines à moteur à combustion interne à conducteur à pied et tenues à la main avec ou non le moteur porté à dos, utilisées dans l’agriculture, la foresterie et le jardinage, afin de déterminer si les surfaces de ces éléments identifiées par les normes de produit spécifiques comme étant des surfaces chaudes, peuvent être touchées par inadvertance par un opérateur pendant le fonctionnement normal.
La présente Norme européenne n'est applicable qu'avec des normes de produit spécifiques pour les catégories de machines spécifiées ci-dessus.
La présente Norme européenne ne spécifie pas quelles surfaces doivent être évaluées.
Kmetijski in gozdarski stroji ter vrtna oprema - Nožno in ročno upravljani stroji - Opredelitev dostopa do vročih površinskih delov
General Information
- Status
- Withdrawn
- Publication Date
- 29-May-2007
- Withdrawal Date
- 03-Mar-2009
- Technical Committee
- CEN/TC 144 - Tractors and machinery for agriculture and forestry
- Drafting Committee
- CEN/TC 144/WG 1 - General safety requirements
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 04-Mar-2009
- Completion Date
- 04-Mar-2009
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 18-Jan-2023
- Referred By
EN 15503:2009+A1:2013 - Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety - Effective Date
- 28-Jan-2026
- Referred By
EN 15503:2009+A2:2015 - Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Rainforest Alliance
International non-profit sustainability certification organization.
SCS Global Services
Global leader in environmental and sustainability certification.
DNV Business Assurance China
Accredited by CNAS for wind turbine and component certification.
Sponsored listings
Frequently Asked Questions
EN 14930:2007 is a standard published by the European Committee for Standardization (CEN). Its full title is "Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces". This standard covers: This European Standard specifies a method for combustion engine driven pedestrian controlled and hand-held machines with or without back pack power unit used in agriculture, forestry and gardening to determine those parts of the surfaces identified by the product specific standards that are hot surfaces and can be touched unintentionally by an operator during normal operation. This European Standard is only applicable together with product specific standards for the categories of machines specified above. This European Standard does not specify which surfaces shall be assessed.
This European Standard specifies a method for combustion engine driven pedestrian controlled and hand-held machines with or without back pack power unit used in agriculture, forestry and gardening to determine those parts of the surfaces identified by the product specific standards that are hot surfaces and can be touched unintentionally by an operator during normal operation. This European Standard is only applicable together with product specific standards for the categories of machines specified above. This European Standard does not specify which surfaces shall be assessed.
EN 14930:2007 is classified under the following ICS (International Classification for Standards) categories: 65.060.01 - Agricultural machines and equipment in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 14930:2007 has the following relationships with other standards: It is inter standard links to EN 14930:2007+A1:2009, EN 15503:2009+A1:2013, EN 15503:2009+A2:2015, EN 15503:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 14930:2007 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/079. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 14930:2007 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfacesMatériels agricoles et forestiers et matériels de jardinage - Machines portables a la main et a conducteur a pied - Détermination du risque de contact par inadvertance avec les surfaces chaudesLand- und forstwirtschaftliche Maschinen und Gartengeräte - Fußgesteuerte und handgeführte Maschinen - Bestimmung der unbeabsichtigten Zugänglichkeit von heißen Oberflächen65.060.01Kmetijski stroji in oprema na splošnoAgricultural machines and equipment in generalICS:SIST EN 14930:2007en,fr,deTa slovenski standard je istoveten z:EN 14930:200701-september-2007SIST EN 14930:2007SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14930May 2007ICS 65.060.01 English VersionAgricultural and forestry machinery and gardening equipment -Pedestrian controlled and hand-held machines - Determinationof accessibility of hot surfacesMatériels agricoles et forestiers et matériels de jardinage -Machines portables à la main et à conducteur à pied -Détermination du risque de contact avec les surfaceschaudesLand- und forstwirtschaftliche Maschinen und Gartengeräte- Fußgesteuerte und handgeführte Maschinen -Bestimmung der Zugänglichkeit von heißen OberflächenThis European Standard was approved by CEN on 26 April 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14930:2007: E
Flowchart for the determination of inadvertent accessibility
of hot surfaces of machinery.10 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by Directive 98/79/EC.11 Bibliography.12
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...