EN 1349:2000/AC:2001
(Corrigendum)Industrial process control valves
Industrial process control valves
This standard is applicable to all industrial process control valves (hereafter referred to as control valves). It establishes definitions and seat leakage classifications. It specifies the face-to-face dimensions and the requirements for inspection, testing and marking. This standard covers control valves from PN 10 to PN 100 and Class 150 to Class 600. The range of DN is according to the dimensions listed in the basic series from the EN 558-1 and EN 558-2.
Stellgeräte für die Prozessregelung
Robinets de régulation des processus industriels
Regulacijski ventili za industrijske procese - Dopolnilo AC
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industrial process control valvesRegulacijski ventili za industrijske procese - Dopolnilo ACRobinets de régulation des processus industrielsStellgeräte für die ProzessregelungTa slovenski standard je istoveten z:EN 1349:2000/AC:2001SIST EN 1349:2001/AC:2002en23.060.40ICS:SLOVENSKI
STANDARDSIST EN 1349:2001/AC:200201-julij-2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1349:2000/ACOctober 2001Octobre 2001Oktober 2001English versionVersion FrançaiseDeutsche FassungIndustrial process control valvesRobinets de régulation des processusindustrielsStellgeräte für die ProzessregelungThis corrigendum becomes effective on 24 October 2001 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 24 octobre 2001 pour incorporation dans les trois versionslinguistiques officielles de l’EN.Die Berichtigung tritt am 24.Oktober 2001 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No. EN 1349:2000/AC:2001 D/E/F
EN 1349:2000/AC:2001 (E/F/D)Replace the annex ZA by the following :Annex ZA (informative)Clauses of this European Standard addressing Essentialrequirements or other provisions of EU DirectivesThis European Standard has been prepared under a mandate given to CEN by the EuropeanCommission and the European Free Trade Asociation and supports essential requirements andof EU Directive 97/23/EECWARNING : Other requirements and other EU Directives can be applicable to the product(s)falling within the scope of this standard.The following clauses of this standard are likely to support requirements of Directive 97/23/EEC.Compliance with the clauses of this standard provides one means of conforming with theessential requirements of the Directive concerned and associated EFTA regulations.Table Z.1 - Clauses of this European Standard addressing Essential requirements of EUDirective 97/23/EC.ClauseNature of requirementAnnex 1 of PED
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.