iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 358:1992

(Main)

Personal protective equipment for work positioning and prevention of falls from a height - Work positioning systems

Personal protective equipment for work positioning and prevention of falls from a height - Work positioning systems

This standard specifies requirements, testing and the marking, labelling and packaging of systems intended for work positioning and support of the worker at a height including the prevention of a free fall. A work positioning system is not meant to be used for fall arrest.

Persönliche Schutzausrüstung für Haltefunktionen und zur Verhinderung von Abstürzen - Haltesysteme

Diese Norm legt Anforderungen, Prüfungen, Kennzeichnung und Verpackung für Systeme fest, die bei Haltefunktionen und dem Halten eines Arbeiters in der Höhe einschliesslich der Verhinderung eines freien Falls benutzt werden. Ein Haltesystem ist nicht zur Benutzung für Auffangzwecke bestimmt.

Equipement individuel de maintien au travail et de prévention contre les chutes de hauteur - Systèmes de maintien au travail

La présente norme spécifie les exigences, les méthodes d'essai, le marquage, l'étiquettage et l'emballage des systèmes de maintien au travail destinés à soutenir le travailleur en hauteur et à l'empêcher de tomber en chute libre. Un système de maintien au travail ne doit pas être utilisé pour l'arrêt des chutes.

Osebna oprema za delo in zaščito pred padci z višine - Sistemi za namestitev pri delu

General Information

Status
Withdrawn
Publication Date
06-Dec-1992
Withdrawal Date
07-Dec-1999
ICS
13.340.99 - Other protective equipment
Technical Committee
CEN/TC 160 - Protection against falls from height including working belts
Drafting Committee
CEN/TC 160/WG 3 - Personal equipment for work positioning and/or prevention of falls from a height
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
08-Dec-1999
Completion Date
08-Dec-1999
Directive
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
Mandate
M/BC/CEN/88/11 - Order for standardization concerning Personal Protective Equipment (P.P.E.) - protection against falls from height
Ref Project
SIST EN 358:1996 - Personal protective equipment for work positioning and prevention of falls from a height - Work positioning systems

Relations

Replaced By
EN 358:1999 - Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards
Effective Date
22-Dec-2008

Buy Standard

EN 358:1996EN 358:1996
PreviousNext
Standard
EN 358:1996
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.GHOXPersönliche Schutzausrüstung für Haltefunktionen und zur Verhinderung von Abstürzen - HaltesystemeEquipement individuel de maintien au travail et de prévention contre les chutes de hauteur - Systemes de maintien au travailPersonal protective equipment for work positioning and prevention of falls from a height - Work position
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 358:2018(Main)
Personal protective equipment for work positioning and prevention of falls from a height - Belts and lanyards for work positioning or restraint
SIST EN 358:2019

This document applies to belts and lanyards intended for the purpose of work positioning or restraint. It specifies the requirements, testing, marking and information supplied by the manufacturer.
This document does not cover restraint lanyards with a fixed length which are not integrated into a belt.
NOTE   Restraint lanyards with a fixed length which are not integrated into a belt are covered in EN 354.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 795:2012(Main)
Personal fall protection equipment - Anchor devices
SIST EN 795:2012

This European Standard specifies requirements for performance and associated test methods for single-user anchor devices which are intended to be removable from the structure. These anchor devices incorporate stationary or travelling (mobile) anchor points designed for the attachment of components of a personal fall protection system in accordance with EN 363.
This European Standard also gives requirements for marking and instructions for use, and guidance on installation.
This European Standard is not applicable to:
-   anchor devices intended to allow more than one user to be attached at any one time;
-   anchor devices used in any sports or recreational activity;
-   equipment designed to conform to EN 516 or EN 517;
-   elements or parts of structures which were installed for use other than as anchor points or anchor devices, e.g. beams, girders;
-   structural anchors (see 3.3).

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 341:2011(Main)
Personal fall protection equipment - Descender devices for rescue
SIST EN 341:2011

This European Standard specifies requirements, test methods, marking and information to be supplied by the manufacturer for descender devices, which include descent lines (hereinafter referred to as lines), intended for rescue and to protect against falls in a rescue system, which is a personal fall protection system. This European Standard does not specify requirements for descender devices that are used for descending in mountaineering, rope access or work positioning systems.
NOTE   A descender device which enables the user to rescue himself and which conforms to this European Standard is personal protective equipment (PPE).

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 365:2004/AC:2006(Corrigendum)
Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
SIST EN 365:2005/AC:2007

TC - Modification to 4.6

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12841:2006(Main)
Personal fall protection equipment - Rope access systems - Rope adjustment devices
SIST EN 12841:2006

This European Standard applies to rope adjustment devices intended for use in rope access systems. It specifies the requirements, test methods, marking and information supplied by the manufacturer. Rope adjustment devices conforming to this European Standard may be designed for the use of one person, or in case of rescue, for two persons simultaneously. The rope adjustment devices as specified are not suitable for use in a fall arrest system.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 362:2004(Main)
Personal protective equipment against falls from a height - Connectors
SIST EN 362:2005

This European Standard specifies the requirements, test methods, marking and information supplied by the manufacturer for connectors. Connectors conforming to this European Standard are used as connecting elements in personal fall protection systems, i.e. fall arrest, work positioning, rope access, restraint and rescue systems.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 365:2004(Main)
Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
SIST EN 365:2005

This document specifies the minimum general requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging of PPE, which includes body holding devices, and other equipment used in conjunction with a body holding device, to prevent falls, for access, egress and work positioning, to arrest falls and for rescue.
This document is not intended to cover:
1)   specific requirements that are only relevant to the particular PPE or other equipment for protection against falls from a height and its use, which should be specified in the relevant document;
2)   PPE or other equipment for protection against falls from a height used in any sports or recreational activity.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 355:2002(Main)
Personal protective equipment against falls from a height - Energy absorbers
SIST EN 355:2002

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for energy absorbers. Energy absorbers conforming to this European Standard are used as elements or components either integrated in a lanyard, an anchor line or a full body harness or in combination with one of them.
Combinations of an energy absorber and a lanyard are sub-systems constituting one of the fall arrest systems covered by prEN 363, when combined with a full body harness specified in EN 361.
Fall arresters are specified in EN 353-1, EN 353-2 and EN 360.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 361:2002(Main)
Personal protective equipment against falls from a height - Full body harnesses
SIST EN 361:2002

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for full body harnesses. Other types of body support, specified in other European Standards, e. g. EN 358, EN 813 or EN 1497, may be incorporated into the full body harness. Fall arrest systems are specified in prEN 363.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 353-2:2002(Main)
Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line
SIST EN 353-2:2002

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for guided type fall arresters including a flexible anchor line which can be secured to an upper anchor point. Guided type fall arresters including a flexible anchor line conforming to this European Standard are sub-systems constituting a part of one of the fall arrest systems covered by prEN 363. Other types of fall arresters are specified in EN 353-1 or EN 360. Energy absorbers are specified in prEN 355.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day