EN ISO 3377-2:2016

SLOVENSKI STANDARD
01-maj-2016
1DGRPHãþD
SIST EN ISO 3377-2:2003
Usnje - Fizikalni in mehanski preskusi - Ugotavljanje nadaljnjega trganja - 2. del:
Trganje z dvojno ostrino (ISO 3377-2:2016)
Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double
edge tear (ISO 3377-2:2016)
Leder - Physikalische und mechanische Prüfungen - Bestimmung der
Weiterreißfestigkeit - Teil 2: Zweikantenriss (ISO 3377-2:2016)
Cuir - Essais physiques et mécaniques - Détermination de la force de déchirement -
Partie 2: Déchirement des deux bords (ISO 3377-2:2016)
Ta slovenski standard je istoveten z: EN ISO 3377-2:2016
ICS:
59.140.30 Usnje in krzno Leather and furs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 3377-2
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2016
EUROPÄISCHE NORM
ICS 59.140.30 Supersedes EN ISO 3377-2:2002
English Version
Leather - Physical and mechanical tests - Determination of
tear load - Part 2: Double edge tear (ISO 3377-2:2016)
Cuir - Essais physiques et mécaniques - Détermination Leder - Physikalische und mechanische Prüfungen -
de la force de déchirement - Partie 2: Déchirement des Bestimmung der Weiterreißfestigkeit - Teil 2:
deux bords (ISO 3377-2:2016) Zweikantenriss (ISO 3377-2:2016)
This European Standard was approved by CEN on 23 January 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3377-2:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
European foreword
This document (EN ISO 3377-2:2016) has been prepared by Technical Committee IULTCS "
International Union of Leather Technologists and Chemists Societies" in collaboration with Technical
Committee CEN/TC 289 “Leather” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2016, and conflicting national standards
shall be withdrawn at the latest by September 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 3377-2:2002.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 3377-2:2016 has been approved by CEN as EN ISO 3377-2:2016 without any
modification.
INTERNATIONAL ISO
STANDARD 3377-2
IULTCS/IUP 8
Second edition
2016-02-15
Leather — Physical and mechanical
tests — Determination of tear load —
Part 2:
Double edge tear
Cuir — Essais physiques et mécaniques — Détermination de la force
de déchirement —
Partie 2: Déchirement des deux bords
Reference numbers
ISO 3377-2:2016(E)
IULTCS/IUP 8:2016(E)
©
ISO 2016
ISO 3377-2:2016(E)
IULTCS/IUP 8:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

ISO 3377-2:2016(E)
IULTCS/IUP 8:2016(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Apparatus . 1
5 Sampling and sample preparation . 2
6 Procedure. 2
7 Test report . 3
...