EN ISO 3819:2015

SLOVENSKI STANDARD
01-marec-2016
/DERUDWRULMVNDVWHNORYLQDýDãH,62
Laboratory glassware - Beakers (ISO 3819:2015)
Laborgeräte aus Glas - Becher (ISO 3819:2015)
Verrerie de laboratoire - Béchers (ISO 3819:2015)
Ta slovenski standard je istoveten z: EN ISO 3819:2015
ICS:
71.040.20 Laboratorijska posoda in Laboratory ware and related
aparati apparatus
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 3819
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2015
EUROPÄISCHE NORM
ICS 17.060
English Version
Laboratory glassware - Beakers (ISO 3819:2015)
Verrerie de laboratoire - Béchers (ISO 3819:2015) Laborgeräte aus Glas - Becher (ISO 3819:2015)
This European Standard was approved by CEN on 5 December 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3819:2015 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 3819:2015) has been prepared by Technical Committee ISO/TC 48 "Laboratory
equipment" in collaboration with Technical Committee CEN/TC 332 “Laboratory equipment” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be
withdrawn at the latest by June 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3819:2015 has been approved by CEN as EN ISO 3819:2015 without any modification.
INTERNATIONAL ISO
STANDARD 3819
Second edition
2015-12-15
Laboratory glassware — Beakers
Verrerie de laboratoire — Béchers
Reference number
ISO 3819:2015(E)
©
ISO 2015
ISO 3819:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

ISO 3819:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Types of beakers . 1
4 Series of beakers . 1
5 Capacity . 1
6 Material . 2
7 Dimensions . 2
7.1 General . 2
7.2 Radius at base . 2
7.3 Wall thickness . 2
8 Details of construction . 3
8.1 Base . 3
8.2 Upper edge . 3
8.3 Spout . 3
8.4 Scale . 4
8.5 Thermal shock resistance . 4
9 Marking .
...