EN 1115-1:1997
(Main)Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 1: General
Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 1: General
This part of prEN 1115 specifies the general aspects of glass-reinforced thermosetting plastics based on unsaturated polyester resin (GRP-UP) piping systems in the field of underground drainage and sewerage under pressure. In conjunction with Parts 2, 3, 5, 6 and 7 prEN 1115 it is applicable to GRP-UP piping systems with flexible, reduced-articulation or rigid joints primarily intended for use in buried installations.
Kunststoff-Rohrleitungssysteme für erdverlegte Druckentwässerung und Druckabwasserleitungen - Glasfaserverstärkte duroplastische Kunststoffe (GFK) auf der Basis von ungesättigtem Polyesterharz (UP) - Teil 1: Allgemeines
Dieser Teil der prEN 1115 legt die allgemeinen Aspekte von glasfaserverstärkten duroplastischen Kunststoffen auf der Basis von ungesättigtem Polyesterharz (GF-UP)im Bereich von erdverlegter Druckentwässerung und Druckabwasserleitungen fest. In Verbindung mit den Teilen 2, 3, 5, 6 und 7 der prEN 1115 ist er anwendbar auf GF-UP-Rohrsysteme mit flexiblen, eingeschränkt beweglichen oder starren Verbindungen, die in erster Linie für die Erdverlegung gedacht sind.
Systèmes de canalisations en plastique pour l'évacuation et l'assainissement enterrés sous pression - Plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP) - Partie 1: Généralités
La présente partie de la prEN 1115 précise les aspects généraux des plastiques thermodurcissables renforcés de verre à base de résine polyester (PRV-UP) dans le domaine de l'évacuation et de l'assainissement enterrés sous pression. Conjointement aux Parties 2, 3, 5, 6 et 7 de la prEN 1115, elle s'applique aux systèmes de canalisations en plastique thermodurcissables renforcés de verre à base de résine polyester (PRV-UP) avec des assemblages flexibles, à articulation réduite ou rigide, prévus principalement pour une utilisation dans les installations enterrées.
Cevni sistemi iz polimernih materialov za odpadno vodo in kanalizacijo pod tlakom, položeni v zemljo - S steklenimi vlakni okrepljeni duromerni materiali (GRP), ki temeljijo na nenasičeni poliestrski smoli (UP) - 1. del: Splošno
General Information
- Status
- Withdrawn
- Publication Date
- 16-Dec-1997
- Withdrawal Date
- 04-Apr-2006
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 05-Apr-2006
- Completion Date
- 05-Apr-2006
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 1115-1:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 1: General". This standard covers: This part of prEN 1115 specifies the general aspects of glass-reinforced thermosetting plastics based on unsaturated polyester resin (GRP-UP) piping systems in the field of underground drainage and sewerage under pressure. In conjunction with Parts 2, 3, 5, 6 and 7 prEN 1115 it is applicable to GRP-UP piping systems with flexible, reduced-articulation or rigid joints primarily intended for use in buried installations.
This part of prEN 1115 specifies the general aspects of glass-reinforced thermosetting plastics based on unsaturated polyester resin (GRP-UP) piping systems in the field of underground drainage and sewerage under pressure. In conjunction with Parts 2, 3, 5, 6 and 7 prEN 1115 it is applicable to GRP-UP piping systems with flexible, reduced-articulation or rigid joints primarily intended for use in buried installations.
EN 1115-1:1997 is classified under the following ICS (International Classification for Standards) categories: 23.040.01 - Pipeline components and pipelines in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1115-1:1997 has the following relationships with other standards: It is inter standard links to EN 14364:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1115-1:1997 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1115-1:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoff-Rohrleitungssysteme für erdverlegte Druckentwässerung und Druckabwasserleitungen - Glasfaserverstärkte duroplastische Kunststoffe (GFK) auf der Basis von ungesättigtem Polyesterharz (UP) - Teil 1: AllgemeinesSystemes de canalisations en plastique pour l'évacuation et l'assainissement enterrés sous pression - Plastiques thermodurcissables renforcés de verre (PRV) a base de résine de polyester non saturé (UP) - Partie 1: GénéralitésPlastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 1: General93.030Zunanji s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...