EN 10338:2015
(Main)Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
This European Standard applies to hot rolled and cold rolled non-coated steel flat products made of multiphase steels for cold forming. It covers cold rolled products of thickness equal to or less than 3 mm and hot rolled products of thickness equal to or less than 6 mm.
These products are delivered in sheet, wide strip, slit wide strip or cut lengths obtained from slit wide strip.
Flat products of multiphase steels for cold forming may be delivered with an electrolytically zinc coating according to EN 10152.
Warmgewalzte und kaltgewalzte Flacherzeugnisse ohne Überzug aus Mehrphasenstählen zum Kaltumformen - Technische Lieferbedingungen
Diese Europäische Norm gilt für warm- und kaltgewalzte Flacherzeugnisse ohne Überzug aus Mehrphasenstählen zum Kaltumformen. Sie behandelt kaltgewalzte Erzeugnisse von Dicken t < 3 mm und warmgewalzte Erzeugnisse von Dicken t 6 mm.
Diese Erzeugnisse werden geliefert als Blech, Breitband, längsgeteiltes Breitband oder Stäbe, die durch Ablängen von längsgeteiltem Breitband erzeugte werden.
Flacherzeugnisse aus Mehrphasenstählen für die Kaltumformung dürfen mit einem elektrolytischen Zinküberzug nach EN 10152 geliefert werden.
Produits plats non revêtus laminés à chaud et à froid en aciers multiphasés pour formage à froid - Conditions techniques de livraison
1.1 La présente Norme européenne s’applique aux produits plats en acier non revêtus laminés à chaud et à froid élaborés en aciers multiphasés pour formage à froid. Elle couvre les produits laminés à froid d’épaisseur inférieure ou égale à 3 mm et aux produits laminés à chaud d’épaisseur inférieure ou égale à 6 mm.
Ces produits sont livrés en tôles, larges bandes, larges bandes refendues ou bandes refendues coupées à longueur qui y sont découpées.
NOTE Les produits en aciers multiphasés pour formage à froid peuvent être livrés avec un revêtement de zinc électrolytique selon EN10152.
Vroče in hladno valjani neprevlečeni izdelki večfaznih jekel za hladno oblikovanje - Tehnični dobavni pogoji
Ta evropski standard se uporablja za vroče in hladno valjane neprevlečene ploščate jeklene izdelke iz večfaznih jekel za hladno oblikovanje. Zajema hladno valjane izdelke debeline največ 3 mm in vroče valjane izdelke debeline največ 6 mm.
Ti izdelki so dobavljeni v ploščah, širokih trakovih, rezanih širokih trakovih ali rezanih dolžinah iz rezanih širokih trakov.
Ploščati izdelki iz večfaznih jekel za hladno oblikovanje so lahko dobavljeni z elektrolitsko cinkovo prevleko v skladu z EN 10152.
General Information
- Status
- Withdrawn
- Publication Date
- 14-Jul-2015
- Withdrawal Date
- 22-Sep-2025
- Technical Committee
- ECISS/TC 109 - Coated and uncoated flat products to be used for cold forming
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 30-Jul-2025
- Completion Date
- 23-Sep-2025
Relations
- Effective Date
- 05-Apr-2023
Frequently Asked Questions
EN 10338:2015 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions". This standard covers: This European Standard applies to hot rolled and cold rolled non-coated steel flat products made of multiphase steels for cold forming. It covers cold rolled products of thickness equal to or less than 3 mm and hot rolled products of thickness equal to or less than 6 mm. These products are delivered in sheet, wide strip, slit wide strip or cut lengths obtained from slit wide strip. Flat products of multiphase steels for cold forming may be delivered with an electrolytically zinc coating according to EN 10152.
This European Standard applies to hot rolled and cold rolled non-coated steel flat products made of multiphase steels for cold forming. It covers cold rolled products of thickness equal to or less than 3 mm and hot rolled products of thickness equal to or less than 6 mm. These products are delivered in sheet, wide strip, slit wide strip or cut lengths obtained from slit wide strip. Flat products of multiphase steels for cold forming may be delivered with an electrolytically zinc coating according to EN 10152.
EN 10338:2015 is classified under the following ICS (International Classification for Standards) categories: 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10338:2015 has the following relationships with other standards: It is inter standard links to EN 10338:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 10338:2015 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kaltgewalzte und warmgewalzte Flacherzeugnisse ohne Überzug aus Mehrphasenstählen zum Kaltumformen - Technische LieferbedingungenProduits plats non revêtus laminés à chaud et laminés à froid d'aciers multiphases pour formage à froid - Conditions techniques de livraisonHot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions77.140.50SROL]GHONLFlat steel products and semi-productsICS:Ta slovenski standard je istoveten z:EN 10338:2015SIST EN 10338:2015en,fr,de01-oktober-2015SIST EN 10338:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10338
July 2015 ICS 77.140.50 English Version
Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
Produits plats non revêtus laminés à chaud et à froid en aciers multiphasés pour formage à froid - Conditions techniques de livraison
Kaltgewalzte und warmgewalzte Flacherzeugnisse ohne Überzug aus Mehrphasenstählen zum Kaltumformen - Technische Lieferbedingungen This European Standard was approved by CEN on 16 April 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10338:2015 ESIST EN 10338:2015
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...